diff --git a/Modules/Core/src/Algorithms/mitkExtractSliceFilter.cpp b/Modules/Core/src/Algorithms/mitkExtractSliceFilter.cpp index f7c9c34e0d..5bd97fb640 100644 --- a/Modules/Core/src/Algorithms/mitkExtractSliceFilter.cpp +++ b/Modules/Core/src/Algorithms/mitkExtractSliceFilter.cpp @@ -1,510 +1,514 @@ /*============================================================================ The Medical Imaging Interaction Toolkit (MITK) Copyright (c) German Cancer Research Center (DKFZ) All rights reserved. Use of this source code is governed by a 3-clause BSD license that can be found in the LICENSE file. ============================================================================*/ #include "mitkExtractSliceFilter.h" #include #include #include #include #include #include #include mitk::ExtractSliceFilter::ExtractSliceFilter(vtkImageReslice *reslicer): m_XMin(0), m_XMax(0), m_YMin(0), m_YMax(0) { if (reslicer == nullptr) { m_Reslicer = vtkSmartPointer::New(); } else { m_Reslicer = reslicer; } m_TimeStep = 0; m_Reslicer->ReleaseDataFlagOn(); m_InterpolationMode = ExtractSliceFilter::RESLICE_NEAREST; m_ResliceTransform = nullptr; m_InPlaneResampleExtentByGeometry = false; m_OutPutSpacing = new mitk::ScalarType[2]; m_OutputDimension = 2; m_ZSpacing = 1.0; m_ZMin = 0; m_ZMax = 0; m_VtkOutputRequested = false; m_BackgroundLevel = -32768.0; m_Component = 0; } mitk::ExtractSliceFilter::~ExtractSliceFilter() { m_ResliceTransform = nullptr; m_WorldGeometry = nullptr; delete[] m_OutPutSpacing; } void mitk::ExtractSliceFilter::GenerateOutputInformation() { Image::ConstPointer input = this->GetInput(); if (input.IsNull()) { return; } if (nullptr == m_WorldGeometry) { return; } Vector3D right, bottom; double widthInMM, heightInMM; Vector2D extent; // set the geometry from current worldgeometry for the reusultimage // this is needed that the image has the correct mitk geometry // the sliceGeometry is the Geometry of the result slice PlaneGeometry::Pointer sliceGeometry = m_WorldGeometry->Clone(); sliceGeometry->GetIndexToWorldTransform()->SetMatrix(m_WorldGeometry->GetIndexToWorldTransform()->GetMatrix()); // the origin of the worldGeometry is transformed to center based coordinates to be an imageGeometry Point3D sliceOrigin = sliceGeometry->GetOrigin(); auto abstractGeometry = dynamic_cast(m_WorldGeometry); auto planeGeometry = dynamic_cast(m_WorldGeometry); if (abstractGeometry != nullptr) { extent[0] = abstractGeometry->GetParametricExtent(0); extent[1] = abstractGeometry->GetParametricExtent(1); widthInMM = abstractGeometry->GetParametricExtentInMM(0); heightInMM = abstractGeometry->GetParametricExtentInMM(1); right = abstractGeometry->GetPlane()->GetAxisVector(0); bottom = abstractGeometry->GetPlane()->GetAxisVector(1); } else { if (planeGeometry != nullptr) { // if the worldGeomatry is a PlaneGeometry everything is straight forward right = planeGeometry->GetAxisVector(0); bottom = planeGeometry->GetAxisVector(1); if (m_InPlaneResampleExtentByGeometry) { // Resampling grid corresponds to the current world geometry. This // means that the spacing of the output 2D image depends on the // currently selected world geometry, and *not* on the image itself. extent[0] = m_WorldGeometry->GetExtent(0); extent[1] = m_WorldGeometry->GetExtent(1); } else { const TimeGeometry *inputTimeGeometry = input->GetTimeGeometry(); if ((inputTimeGeometry == nullptr) || (inputTimeGeometry->CountTimeSteps() <= 0)) { itkWarningMacro(<< "Error reading input image TimeGeometry."); return; } // Resampling grid corresponds to the input geometry. This means that // the spacing of the output 2D image is directly derived from the // associated input image, regardless of the currently selected world // geometry. Vector3D rightInIndex, bottomInIndex; inputTimeGeometry->GetGeometryForTimeStep(m_TimeStep)->WorldToIndex(right, rightInIndex); inputTimeGeometry->GetGeometryForTimeStep(m_TimeStep)->WorldToIndex(bottom, bottomInIndex); extent[0] = rightInIndex.GetNorm(); extent[1] = bottomInIndex.GetNorm(); } // Get the extent of the current world geometry and calculate resampling // spacing therefrom. widthInMM = m_WorldGeometry->GetExtentInMM(0); heightInMM = m_WorldGeometry->GetExtentInMM(1); } else { mitkThrow()<<"mitk::ExtractSliceFilter: No fitting geometry for reslice axis!"; return; } } right.Normalize(); bottom.Normalize(); m_OutPutSpacing[0] = widthInMM / extent[0]; m_OutPutSpacing[1] = heightInMM / extent[1]; /*========== BEGIN setup extent of the slice ==========*/ int xMin, xMax, yMin, yMax; xMin = yMin = 0; xMax = static_cast(extent[0]); yMax = static_cast(extent[1]); if (m_WorldGeometry->GetReferenceGeometry()) { double sliceBounds[6]; for (auto &sliceBound : sliceBounds) { sliceBound = 0.0; } if (this->GetClippedPlaneBounds(m_WorldGeometry->GetReferenceGeometry(), planeGeometry, sliceBounds)) { // Calculate output extent (integer values) xMin = static_cast(sliceBounds[0] / m_OutPutSpacing[0] + 0.5); xMax = static_cast(sliceBounds[1] / m_OutPutSpacing[0] + 0.5); yMin = static_cast(sliceBounds[2] / m_OutPutSpacing[1] + 0.5); yMax = static_cast(sliceBounds[3] / m_OutPutSpacing[1] + 0.5); } // ELSE we use the default values } sliceOrigin += right * (m_OutPutSpacing[0] * 0.5); sliceOrigin += bottom * (m_OutPutSpacing[1] * 0.5); // a worldGeometry is no imageGeometry, thus it is manually set to true sliceGeometry->ImageGeometryOn(); /*At this point we have to adjust the geometry because the origin isn't correct. The wrong origin is related to the rotation of the current world geometry plane. This causes errors on transferring world to index coordinates. We just shift the origin in each direction about the amount of the expanding (needed while rotating the plane). */ Vector3D axis0 = sliceGeometry->GetAxisVector(0); Vector3D axis1 = sliceGeometry->GetAxisVector(1); axis0.Normalize(); axis1.Normalize(); // adapt the origin. Note that for orthogonal planes the minima are '0' and thus the origin stays the same. sliceOrigin += (axis0 * (xMin * m_OutPutSpacing[0])) + (axis1 * (yMin * m_OutPutSpacing[1])); sliceGeometry->SetOrigin(sliceOrigin); /*the bounds as well as the extent of the worldGeometry are not adapted correctly during crosshair rotation. This is only a quick fix and has to be evaluated. The new bounds are set via the max values of the calculated slice extent. It will look like [ 0, x, 0, y, 0, 1]. */ mitk::BoundingBox::BoundsArrayType boundsCopy; boundsCopy[0] = boundsCopy[2] = boundsCopy[4] = 0; boundsCopy[5] = 1; boundsCopy[1] = xMax - xMin; boundsCopy[3] = yMax - yMin; sliceGeometry->SetBounds(boundsCopy); sliceGeometry->Modified(); Image::Pointer output = this->GetOutput(); output->Initialize(input->GetPixelType(), 2, *sliceGeometry); m_XMin = xMin; m_XMax = xMax; m_YMin = yMin; m_YMax = yMax; m_Right = right; m_Bottom = bottom; } void mitk::ExtractSliceFilter::GenerateInputRequestedRegion() { // As we want all pixel information fo the image in our plane, the requested region // is set to the largest possible region in the image. // This is needed because an oblique plane has a larger extent then the image // and the in pipeline it is checked via PropagateResquestedRegion(). But the // extent of the slice is actually fitting because it is oblique within the image. ImageToImageFilter::InputImagePointer input = this->GetInput(); input->SetRequestedRegionToLargestPossibleRegion(); } mitk::ScalarType *mitk::ExtractSliceFilter::GetOutputSpacing() { return m_OutPutSpacing; } void mitk::ExtractSliceFilter::GenerateData() { mitk::Image *input = this->GetInput(); if (!input) { MITK_ERROR << "mitk::ExtractSliceFilter: No input image available. Please set the input!" << std::endl; itkExceptionMacro("mitk::ExtractSliceFilter: No input image available. Please set the input!"); return; } if (!m_WorldGeometry) { MITK_ERROR << "mitk::ExtractSliceFilter: No Geometry for reslicing available." << std::endl; itkExceptionMacro("mitk::ExtractSliceFilter: No Geometry for reslicing available."); return; } const TimeGeometry *inputTimeGeometry = this->GetInput()->GetTimeGeometry(); if ((inputTimeGeometry == nullptr) || (inputTimeGeometry->CountTimeSteps() <= 0)) { itkWarningMacro(<< "Error reading input image TimeGeometry."); return; } // is it a valid timeStep? if (inputTimeGeometry->IsValidTimeStep(m_TimeStep) == false) { itkWarningMacro(<< "This is not a valid timestep: " << m_TimeStep); return; } // check if there is something to display. if (!input->IsVolumeSet(m_TimeStep)) { itkWarningMacro(<< "No volume data existent at given timestep " << m_TimeStep); return; } /*================#BEGIN setup vtkImageReslice properties================*/ Point3D origin; Vector3D normal; const auto *planeGeometry = dynamic_cast(m_WorldGeometry); // Code for curved planes, mostly taken 1:1 from imageVtkMapper2D and not tested yet. // Do we have an AbstractTransformGeometry? // This is the case for AbstractTransformGeometry's (e.g. a ThinPlateSplineCurvedGeometry ) const auto *abstractGeometry = dynamic_cast(m_WorldGeometry); if (abstractGeometry != nullptr) { m_ResliceTransform = abstractGeometry; origin = abstractGeometry->GetPlane()->GetOrigin(); normal = abstractGeometry->GetPlane()->GetNormal(); normal.Normalize(); // Use a combination of the InputGeometry *and* the possible non-rigid // AbstractTransformGeometry for reslicing the 3D Image vtkSmartPointer composedResliceTransform = vtkSmartPointer::New(); composedResliceTransform->Identity(); composedResliceTransform->Concatenate( inputTimeGeometry->GetGeometryForTimeStep(m_TimeStep)->GetVtkTransform()->GetLinearInverse()); composedResliceTransform->Concatenate(abstractGeometry->GetVtkAbstractTransform()); m_Reslicer->SetResliceTransform(composedResliceTransform); // Set background level to BLACK instead of translucent, to avoid // boundary artifacts (see PlaneGeometryDataVtkMapper3D) // Note: Backgroundlevel was hardcoded before to -1023 m_Reslicer->SetBackgroundLevel(m_BackgroundLevel); } else { if (planeGeometry != nullptr) { // if the worldGeomatry is a PlaneGeometry everything is straight forward origin = planeGeometry->GetOrigin(); normal = planeGeometry->GetNormal(); normal.Normalize(); /* * Transform the origin to center based coordinates. * Note: * This is needed besause vtk's origin is center based too (!!!) ( see 'The VTK book' page 88 ) * and the worldGeometry surrouding the image is no imageGeometry. So the worldGeometry * has its origin at the corner of the voxel and needs to be transformed. */ origin += m_Right * (m_OutPutSpacing[0] * 0.5); origin += m_Bottom * (m_OutPutSpacing[1] * 0.5); // set the tranform for reslicing. // Use inverse transform of the input geometry for reslicing the 3D image. // This is needed if the image volume already transformed if (m_ResliceTransform.IsNotNull()) m_Reslicer->SetResliceTransform(m_ResliceTransform->GetVtkTransform()->GetLinearInverse()); // Set background level to TRANSLUCENT (see PlaneGeometryDataVtkMapper3D), // else the background of the image turns out gray // Note: Backgroundlevel was hardcoded to -32768 m_Reslicer->SetBackgroundLevel(m_BackgroundLevel); } else { itkExceptionMacro("mitk::ExtractSliceFilter: No fitting geometry for reslice axis!"); return; } } if (m_ResliceTransform.IsNotNull()) { // if the resliceTransform is set the reslice axis are recalculated. // Thus the geometry information is not fitting. Therefor a unitSpacingFilter // is used to set up a global spacing of 1 and compensate the transform. vtkSmartPointer unitSpacingImageFilter = vtkSmartPointer::New(); unitSpacingImageFilter->ReleaseDataFlagOn(); unitSpacingImageFilter->SetOutputSpacing(1.0, 1.0, 1.0); unitSpacingImageFilter->SetInputData(input->GetVtkImageData(m_TimeStep)); m_Reslicer->SetInputConnection(unitSpacingImageFilter->GetOutputPort()); } else { // if no transform is set the image can be used directly m_Reslicer->SetInputData(input->GetVtkImageData(m_TimeStep)); } /*setup the plane where vktImageReslice extracts the slice*/ // ResliceAxesOrigin is the anchor point of the plane double originInVtk[3]; itk2vtk(origin, originInVtk); m_Reslicer->SetResliceAxesOrigin(originInVtk); // the cosines define the plane: x and y are the direction vectors, n is the planes normal // this specifies a matrix 3x3 // x1 y1 n1 // x2 y2 n2 // x3 y3 n3 double cosines[9]; vnl2vtk(m_Right.GetVnlVector(), cosines); // x vnl2vtk(m_Bottom.GetVnlVector(), cosines + 3); // y vnl2vtk(normal.GetVnlVector(), cosines + 6); // n m_Reslicer->SetResliceAxesDirectionCosines(cosines); // we only have one slice, not a volume m_Reslicer->SetOutputDimensionality(m_OutputDimension); // set the interpolation mode for slicing switch (this->m_InterpolationMode) { case RESLICE_NEAREST: m_Reslicer->SetInterpolationModeToNearestNeighbor(); break; case RESLICE_LINEAR: m_Reslicer->SetInterpolationModeToLinear(); break; case RESLICE_CUBIC: m_Reslicer->SetInterpolationModeToCubic(); break; default: // the default interpolation used by mitk m_Reslicer->SetInterpolationModeToNearestNeighbor(); } /*========== BEGIN setup extent of the slice ==========*/ // Set the output extents! First included pixel index and last included pixel index // xMax and yMax are one after the last pixel. so they have to be decremented by 1. // In case we have a 2D image, xMax or yMax might be 0. in this case, do not decrement, but take 0. m_Reslicer->SetOutputExtent(m_XMin, std::max(0, m_XMax - 1), m_YMin, std::max(0, m_YMax - 1), m_ZMin, m_ZMax); /*========== END setup extent of the slice ==========*/ m_Reslicer->SetOutputOrigin(0.0, 0.0, 0.0); m_Reslicer->SetOutputSpacing(m_OutPutSpacing[0], m_OutPutSpacing[1], m_ZSpacing); // TODO check the following lines, they are responsible whether vtk error outputs appear or not m_Reslicer->UpdateWholeExtent(); // this produces a bad allocation error for 2D images // m_Reslicer->GetOutput()->UpdateInformation(); // m_Reslicer->GetOutput()->SetUpdateExtentToWholeExtent(); // start the pipeline m_Reslicer->Update(); /*================ #END setup vtkImageReslice properties================*/ if (m_VtkOutputRequested) { // no conversion to mitk // no mitk geometry will be set, as the output is vtkImageData only!!! // no image component will be extracted, as the caller might need the whole multi-component image as vtk output return; } else { auto reslicedImage = vtkSmartPointer::New(); reslicedImage = m_Reslicer->GetOutput(); if (nullptr == reslicedImage) { itkWarningMacro(<< "Reslicer returned empty image"); return; } /*================ #BEGIN Extract component from image slice ================*/ int numberOfScalarComponent = reslicedImage->GetNumberOfScalarComponents(); if (numberOfScalarComponent > 1 && static_cast(numberOfScalarComponent) >= m_Component) { // image has more than one component, extract the correct component information with the given 'component' parameter auto vectorComponentExtractor = vtkSmartPointer::New(); vectorComponentExtractor->SetInputData(reslicedImage); vectorComponentExtractor->SetComponents(m_Component); vectorComponentExtractor->Update(); reslicedImage = vectorComponentExtractor->GetOutput(); } /*================ #END Extract component from image slice ================*/ /*================ #BEGIN Convert the slice to an mitk::Image ================*/ mitk::Image::Pointer resultImage = GetOutput(); /*Temporary store the geometry that is already correct (set in GeneratOutputInformation()) but will be reset due to initialize.*/ mitk::BaseGeometry::Pointer resultGeometry = resultImage->GetGeometry(); // initialize resultimage with the specs of the vtkImageData object returned from vtkImageReslice if (reslicedImage->GetDataDimension() == 1) { // If original image was 2D, the slice might have an y extent of 0. // Still i want to ensure here that Image is 2D resultImage->Initialize(reslicedImage, 1, -1, -1, 1); } else { resultImage->Initialize(reslicedImage); } + + // transfer the voxel data + resultImage->SetVolume(reslicedImage->GetScalarPointer()); + /*================ #END Convert the slice to an mitk::Image ================*/ resultImage->SetGeometry(resultGeometry); } } bool mitk::ExtractSliceFilter::GetClippedPlaneBounds(double bounds[6]) { if (!m_WorldGeometry || !this->GetInput()) return false; return this->GetClippedPlaneBounds( m_WorldGeometry->GetReferenceGeometry(), dynamic_cast(m_WorldGeometry), bounds); } bool mitk::ExtractSliceFilter::GetClippedPlaneBounds(const BaseGeometry *boundingGeometry, const PlaneGeometry *planeGeometry, double *bounds) { bool b = mitk::PlaneClipping::CalculateClippedPlaneBounds(boundingGeometry, planeGeometry, bounds); return b; }