diff --git a/Modules/Core/include/mitkRenderingManager.h b/Modules/Core/include/mitkRenderingManager.h index fdd2d9fe88..6574b8eefe 100644 --- a/Modules/Core/include/mitkRenderingManager.h +++ b/Modules/Core/include/mitkRenderingManager.h @@ -1,415 +1,419 @@ /*=================================================================== The Medical Imaging Interaction Toolkit (MITK) Copyright (c) German Cancer Research Center, Division of Medical and Biological Informatics. All rights reserved. This software is distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See LICENSE.txt or http://www.mitk.org for details. ===================================================================*/ #ifndef MITKRENDERINGMANAGER_H_HEADER_INCLUDED_C135A197 #define MITKRENDERINGMANAGER_H_HEADER_INCLUDED_C135A197 #include #include #include #include #include #include "mitkProperties.h" #include "mitkPropertyList.h" #include "mitkTimeGeometry.h" #include //class itk::MultiThreader; class vtkRenderWindow; class vtkObject; namespace mitk { class RenderingManager; class RenderingManagerFactory; class BaseGeometry; class SliceNavigationController; class BaseRenderer; class DataStorage; /** * \brief Manager for coordinating the rendering process. * * RenderingManager is a central instance retrieving and executing * RenderWindow update requests. Its main purpose is to coordinate * distributed requests which cannot be aware of each other - lacking the * knowledge of whether they are really necessary or not. For example, two * objects might determine that a specific RenderWindow needs to be updated. * This would result in one unnecessary update, if both executed the update * on their own. * * The RenderingManager addresses this by letting each such object * request an update, and waiting for other objects to possibly * issue the same request. The actual update will then only be executed at a * well-defined point in the main event loop (this may be each time after * event processing is done). * * Convinience methods for updating all RenderWindows which have been * registered with the RenderingManager exist. If theses methods are not * used, it is not required to register (add) RenderWindows prior to using * the RenderingManager. * * The methods #ForceImmediateUpdate() and #ForceImmediateUpdateAll() can * be used to force the RenderWindow update execution without any delay, * bypassing the request functionality. * * The interface of RenderingManager is platform independent. Platform * specific subclasses have to be implemented, though, to supply an * appropriate event issueing for controlling the update execution process. * See method documentation for a description of how this can be done. * * \sa TestingRenderingManager An "empty" RenderingManager implementation which * can be used in tests etc. * */ class MITKCORE_EXPORT RenderingManager : public itk::Object { public: mitkClassMacroItkParent(RenderingManager, itk::Object); typedef std::vector RenderWindowVector; typedef std::vector FloatVector; typedef std::vector BoolVector; typedef itk::SmartPointer DataStoragePointer; enum RequestType { REQUEST_UPDATE_ALL = 0, REQUEST_UPDATE_2DWINDOWS, REQUEST_UPDATE_3DWINDOWS }; static Pointer New(); /** Set the object factory which produces the desired platform specific * RenderingManager singleton instance. */ static void SetFactory(RenderingManagerFactory *factory); /** Get the object factory which produces the platform specific * RenderingManager instances. */ static const RenderingManagerFactory *GetFactory(); /** Returns true if a factory has already been set. */ static bool HasFactory(); /** Get the RenderingManager singleton instance. */ static RenderingManager *GetInstance(); /** Returns true if the singleton instance does already exist. */ static bool IsInstantiated(); /** Adds a RenderWindow. This is required if the methods #RequestUpdateAll * or #ForceImmediateUpdate are to be used. */ void AddRenderWindow(vtkRenderWindow *renderWindow); /** Removes a RenderWindow. */ void RemoveRenderWindow(vtkRenderWindow *renderWindow); /** Get a list of all registered RenderWindows */ const RenderWindowVector &GetAllRegisteredRenderWindows(); /** Requests an update for the specified RenderWindow, to be executed as * soon as the main loop is ready for rendering. */ void RequestUpdate(vtkRenderWindow *renderWindow); /** Immediately executes an update of the specified RenderWindow. */ void ForceImmediateUpdate(vtkRenderWindow *renderWindow); /** Requests all currently registered RenderWindows to be updated. * If only 2D or 3D windows should be updated, this can be specified * via the parameter requestType. */ void RequestUpdateAll(RequestType type = REQUEST_UPDATE_ALL); /** Immediately executes an update of all registered RenderWindows. * If only 2D or 3D windows should be updated, this can be specified * via the parameter requestType. */ void ForceImmediateUpdateAll(RequestType type = REQUEST_UPDATE_ALL); /** Initializes the windows specified by requestType to the geometry of the * given DataStorage. */ // virtual bool InitializeViews( const DataStorage *storage, const DataNode* node = nullptr, // RequestType type = REQUEST_UPDATE_ALL, bool preserveRoughOrientationInWorldSpace = false ); /** Initializes the windows specified by requestType to the given * geometry. PLATFORM SPECIFIC. TODO: HOW IS THIS PLATFORM SPECIFIC? * Throws an exception if bounding box has 0 extent due to exceeding * double precision range. */ virtual bool InitializeViews(const BaseGeometry *geometry, RequestType type = REQUEST_UPDATE_ALL, bool preserveRoughOrientationInWorldSpace = false); virtual bool InitializeViews(const TimeGeometry *geometry, RequestType type = REQUEST_UPDATE_ALL, bool preserveRoughOrientationInWorldSpace = false); /** Initializes the windows to the default viewing direction * (geomtry information is NOT changed). PLATFORM SPECIFIC. */ virtual bool InitializeViews(RequestType type = REQUEST_UPDATE_ALL); /** Initializes the specified window to the geometry of the given * DataNode. Set "initializeGlobalTimeSNC" to true in order to use this * geometry as global TimeGeometry. PLATFORM SPECIFIC. */ // virtual bool InitializeView( vtkRenderWindow *renderWindow, const DataStorage* ds, const DataNode* node = nullptr, // bool initializeGlobalTimeSNC = false ); /** Initializes the specified window to the given geometry. Set * "initializeGlobalTimeSNC" to true in order to use this geometry as * global TimeGeometry. PLATFORM SPECIFIC. */ virtual bool InitializeView(vtkRenderWindow *renderWindow, const BaseGeometry *geometry, bool initializeGlobalTimeSNC = false); virtual bool InitializeView(vtkRenderWindow *renderWindow, const TimeGeometry *geometry, bool initializeGlobalTimeSNC = false); /** Initializes the specified window to the default viewing direction * (geomtry information is NOT changed). PLATFORM SPECIFIC. */ virtual bool InitializeView(vtkRenderWindow *renderWindow); /** * @brief Initializes the renderwindows by the aggregated geometry of * all objects that are held in the data storage. * This is basically a global reinit * @param The data storage from which the bounding object can be retrieved */ virtual void InitializeViewsByBoundingObjects(const DataStorage *); /** Gets the (global) SliceNavigationController responsible for * time-slicing. */ const SliceNavigationController *GetTimeNavigationController() const; /** Gets the (global) SliceNavigationController responsible for * time-slicing. */ SliceNavigationController *GetTimeNavigationController(); ~RenderingManager() override; /** Executes all pending requests. This method has to be called by the * system whenever a RenderingManager induced request event occurs in * the system pipeline (see concrete RenderingManager implementations). */ virtual void ExecutePendingRequests(); bool IsRendering() const; void AbortRendering(); /** En-/Disable LOD increase globally. */ itkSetMacro(LODIncreaseBlocked, bool); /** En-/Disable LOD increase globally. */ itkGetMacro(LODIncreaseBlocked, bool); /** En-/Disable LOD increase globally. */ itkBooleanMacro(LODIncreaseBlocked); /** En-/Disable LOD abort mechanism. */ itkSetMacro(LODAbortMechanismEnabled, bool); /** En-/Disable LOD abort mechanism. */ itkGetMacro(LODAbortMechanismEnabled, bool); /** En-/Disable LOD abort mechanism. */ itkBooleanMacro(LODAbortMechanismEnabled); /** Force a sub-class to start a timer for a pending hires-rendering request */ virtual void StartOrResetTimer(){}; /** To be called by a sub-class from a timer callback */ void ExecutePendingHighResRenderingRequest(); virtual void DoStartRendering(){}; virtual void DoMonitorRendering(){}; virtual void DoFinishAbortRendering(){}; int GetNextLOD(BaseRenderer *renderer); /** Set current LOD (nullptr means all renderers)*/ void SetMaximumLOD(unsigned int max); void SetShading(bool state, unsigned int lod); bool GetShading(unsigned int lod); void SetClippingPlaneStatus(bool status); bool GetClippingPlaneStatus(); void SetShadingValues(float ambient, float diffuse, float specular, float specpower); FloatVector &GetShadingValues(); /** Returns a property list */ PropertyList::Pointer GetPropertyList() const; /** Returns a property from m_PropertyList */ BaseProperty *GetProperty(const char *propertyKey) const; /** Sets or adds (if not present) a property in m_PropertyList */ void SetProperty(const char *propertyKey, BaseProperty *propertyValue); /** * \brief Setter / Getter for internal DataStorage * * Sets / returns the mitk::DataStorage that is used internally. This instance holds all mitk::DataNodes that are * rendered by the registered BaseRenderers. * * If this DataStorage is changed at runtime by calling SetDataStorage(), * all currently registered BaseRenderers are automatically given the correct instance. * When a new BaseRenderer is added, it is automatically initialized with the currently active DataStorage. */ void SetDataStorage(mitk::DataStorage *storage); /** * \brief Setter / Getter for internal DataStorage * * Sets / returns the mitk::DataStorage that is used internally. This instance holds all mitk::DataNodes that are * rendered by the registered BaseRenderers. * * If this DataStorage is changed at runtime by calling SetDataStorage(), * all currently registered BaseRenderers are automatically given the correct instance. * When a new BaseRenderer is added, it is automatically initialized with the currently active DataStorage. */ mitk::DataStorage *GetDataStorage(); /** * @brief Sets a flag to the given renderwindow to indicated that it has the focus e.g. has been clicked recently. * @param focusWindow */ void SetRenderWindowFocus(vtkRenderWindow *focusWindow); /** @brief Starts continous updating of the render windows in a separate thread. */ - void StartContinousUpdating(int FramesPerSecond = 20); + void StartContinousUpdating(unsigned int FramesPerSecond3DWindow = 5, unsigned int FramesPerSecond2DWindows = 20); /** @brief Stops continous updating of the render windows if it is running. */ void StopContinousUpdating(); itkGetMacro(FocusedRenderWindow, vtkRenderWindow *) itkSetMacro(ConstrainedPanningZooming, bool); protected: enum { RENDERING_INACTIVE = 0, RENDERING_REQUESTED, RENDERING_INPROGRESS }; RenderingManager(); /** Members for thread for continous updating */ static ITK_THREAD_RETURN_TYPE ThreadStartContinousUpdate(void *data); itk::MultiThreader::Pointer m_MultiThreader; int m_ThreadID; bool m_run; void ContinousUpdate(); + unsigned int m_timeStep2DWindows; //Update step in milliseconds + long nextUpDate2D; + unsigned int m_timeStep3DWindow; // Update step in milliseconds + long nextUpDate3D; /** Abstract method for generating a system specific event for rendering * request. This method is called whenever an update is requested */ virtual void GenerateRenderingRequestEvent() = 0; virtual void InitializePropertyList(); bool m_UpdatePending; typedef std::map RendererIntMap; typedef std::map RendererBoolMap; RendererBoolMap m_RenderingAbortedMap; RendererIntMap m_NextLODMap; unsigned int m_MaxLOD; bool m_LODIncreaseBlocked; bool m_LODAbortMechanismEnabled; BoolVector m_ShadingEnabled; bool m_ClippingPlaneEnabled; FloatVector m_ShadingValues; static void RenderingStartCallback(vtkObject *caller, unsigned long eid, void *clientdata, void *calldata); static void RenderingProgressCallback(vtkObject *caller, unsigned long eid, void *clientdata, void *calldata); static void RenderingEndCallback(vtkObject *caller, unsigned long eid, void *clientdata, void *calldata); typedef std::map RenderWindowList; RenderWindowList m_RenderWindowList; RenderWindowVector m_AllRenderWindows; struct RenderWindowCallbacks { vtkCallbackCommand *commands[3u]; }; typedef std::map RenderWindowCallbacksList; RenderWindowCallbacksList m_RenderWindowCallbacksList; itk::SmartPointer m_TimeNavigationController; static RenderingManager::Pointer s_Instance; static RenderingManagerFactory *s_RenderingManagerFactory; PropertyList::Pointer m_PropertyList; DataStoragePointer m_DataStorage; bool m_ConstrainedPanningZooming; private: void InternalViewInitialization(mitk::BaseRenderer *baseRenderer, const mitk::TimeGeometry *geometry, bool boundingBoxInitialized, int mapperID); vtkRenderWindow *m_FocusedRenderWindow; }; #pragma GCC visibility push(default) itkEventMacro(RenderingManagerEvent, itk::AnyEvent); itkEventMacro(RenderingManagerViewsInitializedEvent, RenderingManagerEvent); #pragma GCC visibility pop itkEventMacroDeclaration(FocusChangedEvent, itk::AnyEvent) /** * Generic RenderingManager implementation for "non-rendering-plattform", * e.g. for tests. Its factory (TestingRenderingManagerFactory) is * automatically on start-up and is used by default if not other * RenderingManagerFactory is instantiated explicitly thereafter. * (see mitkRenderingManager.cpp) */ class MITKCORE_EXPORT TestingRenderingManager : public RenderingManager { public: mitkClassMacro(TestingRenderingManager, RenderingManager); itkFactorylessNewMacro(Self) itkCloneMacro(Self) protected : void GenerateRenderingRequestEvent() override{ // ForceImmediateUpdateAll(); }; }; } // namespace mitk #endif /* MITKRenderingManager_H_HEADER_INCLUDED_C135A197 */ diff --git a/Modules/Core/src/Controllers/mitkRenderingManager.cpp b/Modules/Core/src/Controllers/mitkRenderingManager.cpp index fc579ee6bc..3892602017 100644 --- a/Modules/Core/src/Controllers/mitkRenderingManager.cpp +++ b/Modules/Core/src/Controllers/mitkRenderingManager.cpp @@ -1,790 +1,815 @@ /*=================================================================== The Medical Imaging Interaction Toolkit (MITK) Copyright (c) German Cancer Research Center, Division of Medical and Biological Informatics. All rights reserved. This software is distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See LICENSE.txt or http://www.mitk.org for details. ===================================================================*/ #include "mitkBaseRenderer.h" #include "mitkCameraController.h" #include "mitkNodePredicateNot.h" #include "mitkNodePredicateProperty.h" #include "mitkProportionalTimeGeometry.h" #include "mitkRenderingManager.h" #include "mitkRenderingManagerFactory.h" #include #include "mitkNumericTypes.h" #include #include -#include #include +#include #include #include +#include namespace mitk { itkEventMacroDefinition(FocusChangedEvent, itk::AnyEvent) RenderingManager::Pointer RenderingManager::s_Instance = nullptr; RenderingManagerFactory *RenderingManager::s_RenderingManagerFactory = nullptr; RenderingManager::RenderingManager() : m_UpdatePending(false), m_MaxLOD(1), m_LODIncreaseBlocked(false), m_LODAbortMechanismEnabled(false), m_ClippingPlaneEnabled(false), m_TimeNavigationController(SliceNavigationController::New()), m_DataStorage(nullptr), m_ConstrainedPanningZooming(true), m_FocusedRenderWindow(nullptr), m_MultiThreader(itk::MultiThreader::New()), m_ThreadID(0) { m_ShadingEnabled.assign(3, false); m_ShadingValues.assign(4, 0.0); InitializePropertyList(); } RenderingManager::~RenderingManager() { // Decrease reference counts of all registered vtkRenderWindows for // proper destruction RenderWindowVector::iterator it; for (it = m_AllRenderWindows.begin(); it != m_AllRenderWindows.end(); ++it) { (*it)->UnRegister(nullptr); auto callbacks_it = this->m_RenderWindowCallbacksList.find(*it); if (callbacks_it != this->m_RenderWindowCallbacksList.end()) { (*it)->RemoveObserver(callbacks_it->second.commands[0u]); (*it)->RemoveObserver(callbacks_it->second.commands[1u]); (*it)->RemoveObserver(callbacks_it->second.commands[2u]); } } } void RenderingManager::SetFactory(RenderingManagerFactory *factory) { s_RenderingManagerFactory = factory; } const RenderingManagerFactory *RenderingManager::GetFactory() { return s_RenderingManagerFactory; } bool RenderingManager::HasFactory() { if (RenderingManager::s_RenderingManagerFactory) { return true; } else { return false; } } RenderingManager::Pointer RenderingManager::New() { const RenderingManagerFactory *factory = GetFactory(); if (factory == nullptr) return nullptr; return factory->CreateRenderingManager(); } RenderingManager *RenderingManager::GetInstance() { if (!RenderingManager::s_Instance) { if (s_RenderingManagerFactory) { s_Instance = s_RenderingManagerFactory->CreateRenderingManager(); } } return s_Instance; } bool RenderingManager::IsInstantiated() { if (RenderingManager::s_Instance) return true; else return false; } void RenderingManager::AddRenderWindow(vtkRenderWindow *renderWindow) { if (renderWindow && (m_RenderWindowList.find(renderWindow) == m_RenderWindowList.end())) { m_RenderWindowList[renderWindow] = RENDERING_INACTIVE; m_AllRenderWindows.push_back(renderWindow); if (m_DataStorage.IsNotNull()) mitk::BaseRenderer::GetInstance(renderWindow)->SetDataStorage(m_DataStorage.GetPointer()); // Register vtkRenderWindow instance renderWindow->Register(nullptr); // Add callbacks for rendering abort mechanism // BaseRenderer *renderer = BaseRenderer::GetInstance( renderWindow ); vtkCallbackCommand *startCallbackCommand = vtkCallbackCommand::New(); startCallbackCommand->SetCallback(RenderingManager::RenderingStartCallback); renderWindow->AddObserver(vtkCommand::StartEvent, startCallbackCommand); vtkCallbackCommand *progressCallbackCommand = vtkCallbackCommand::New(); progressCallbackCommand->SetCallback(RenderingManager::RenderingProgressCallback); renderWindow->AddObserver(vtkCommand::AbortCheckEvent, progressCallbackCommand); vtkCallbackCommand *endCallbackCommand = vtkCallbackCommand::New(); endCallbackCommand->SetCallback(RenderingManager::RenderingEndCallback); renderWindow->AddObserver(vtkCommand::EndEvent, endCallbackCommand); RenderWindowCallbacks callbacks; callbacks.commands[0u] = startCallbackCommand; callbacks.commands[1u] = progressCallbackCommand; callbacks.commands[2u] = endCallbackCommand; this->m_RenderWindowCallbacksList[renderWindow] = callbacks; // Delete vtk variables correctly startCallbackCommand->Delete(); progressCallbackCommand->Delete(); endCallbackCommand->Delete(); } } void RenderingManager::RemoveRenderWindow(vtkRenderWindow *renderWindow) { if (m_RenderWindowList.erase(renderWindow)) { auto callbacks_it = this->m_RenderWindowCallbacksList.find(renderWindow); if (callbacks_it != this->m_RenderWindowCallbacksList.end()) { renderWindow->RemoveObserver(callbacks_it->second.commands[0u]); renderWindow->RemoveObserver(callbacks_it->second.commands[1u]); renderWindow->RemoveObserver(callbacks_it->second.commands[2u]); this->m_RenderWindowCallbacksList.erase(callbacks_it); } auto rw_it = std::find(m_AllRenderWindows.begin(), m_AllRenderWindows.end(), renderWindow); if (rw_it != m_AllRenderWindows.cend()) { // Decrease reference count for proper destruction (*rw_it)->UnRegister(nullptr); m_AllRenderWindows.erase(rw_it); } } } const RenderingManager::RenderWindowVector &RenderingManager::GetAllRegisteredRenderWindows() { return m_AllRenderWindows; } void RenderingManager::RequestUpdate(vtkRenderWindow *renderWindow) { // If the renderWindow is not valid, we do not want to inadvertantly create // an entry in the m_RenderWindowList map. It is possible if the user is // regularly calling AddRenderer and RemoveRenderer for a rendering update // to come into this method with a renderWindow pointer that is valid in the // sense that the window does exist within the application, but that // renderWindow has been temporarily removed from this RenderingManager for // performance reasons. if (m_RenderWindowList.find(renderWindow) == m_RenderWindowList.cend()) { return; } m_RenderWindowList[renderWindow] = RENDERING_REQUESTED; if (!m_UpdatePending) { m_UpdatePending = true; this->GenerateRenderingRequestEvent(); } } void RenderingManager::ForceImmediateUpdate(vtkRenderWindow *renderWindow) { // If the renderWindow is not valid, we do not want to inadvertantly create // an entry in the m_RenderWindowList map. It is possible if the user is // regularly calling AddRenderer and RemoveRenderer for a rendering update // to come into this method with a renderWindow pointer that is valid in the // sense that the window does exist within the application, but that // renderWindow has been temporarily removed from this RenderingManager for // performance reasons. if (m_RenderWindowList.find(renderWindow) == m_RenderWindowList.cend()) { return; } // Erase potentially pending requests for this window m_RenderWindowList[renderWindow] = RENDERING_INACTIVE; m_UpdatePending = false; // Immediately repaint this window (implementation platform specific) // If the size is 0 it crashes int *size = renderWindow->GetSize(); if (0 != size[0] && 0 != size[1]) { // prepare the camera etc. before rendering // Note: this is a very important step which should be called before the VTK render! // If you modify the camera anywhere else or after the render call, the scene cannot be seen. auto *vPR = dynamic_cast(mitk::BaseRenderer::GetInstance(renderWindow)); if (vPR) vPR->PrepareRender(); // Execute rendering renderWindow->Render(); } } void RenderingManager::RequestUpdateAll(RequestType type) { RenderWindowList::const_iterator it; for (it = m_RenderWindowList.cbegin(); it != m_RenderWindowList.cend(); ++it) { int id = BaseRenderer::GetInstance(it->first)->GetMapperID(); if ((type == REQUEST_UPDATE_ALL) || ((type == REQUEST_UPDATE_2DWINDOWS) && (id == 1)) || ((type == REQUEST_UPDATE_3DWINDOWS) && (id == 2))) { this->RequestUpdate(it->first); } } } void RenderingManager::ForceImmediateUpdateAll(RequestType type) { RenderWindowList::const_iterator it; for (it = m_RenderWindowList.cbegin(); it != m_RenderWindowList.cend(); ++it) { int id = BaseRenderer::GetInstance(it->first)->GetMapperID(); if ((type == REQUEST_UPDATE_ALL) || ((type == REQUEST_UPDATE_2DWINDOWS) && (id == 1)) || ((type == REQUEST_UPDATE_3DWINDOWS) && (id == 2))) { // Immediately repaint this window (implementation platform specific) // If the size is 0, it crashes this->ForceImmediateUpdate(it->first); } } } void RenderingManager::InitializeViewsByBoundingObjects(const DataStorage *ds) { if (!ds) return; // get all nodes that have not set "includeInBoundingBox" to false mitk::NodePredicateNot::Pointer pred = mitk::NodePredicateNot::New( mitk::NodePredicateProperty::New("includeInBoundingBox", mitk::BoolProperty::New(false))); mitk::DataStorage::SetOfObjects::ConstPointer rs = ds->GetSubset(pred); // calculate bounding geometry of these nodes auto bounds = ds->ComputeBoundingGeometry3D(rs, "visible"); // initialize the views to the bounding geometry this->InitializeViews(bounds); } // TODO_GOETZ // Remove old function, so only this one is working. bool RenderingManager::InitializeViews(const BaseGeometry *dataGeometry, RequestType type, bool preserveRoughOrientationInWorldSpace) { ProportionalTimeGeometry::Pointer propTimeGeometry = ProportionalTimeGeometry::New(); propTimeGeometry->Initialize(dynamic_cast(dataGeometry->Clone().GetPointer()), 1); return InitializeViews(propTimeGeometry, type, preserveRoughOrientationInWorldSpace); } bool RenderingManager::InitializeViews(const TimeGeometry *dataGeometry, RequestType type, bool /*preserveRoughOrientationInWorldSpace*/) { MITK_DEBUG << "initializing views"; bool boundingBoxInitialized = false; TimeGeometry::ConstPointer timeGeometry = dataGeometry; TimeGeometry::Pointer modifiedGeometry = nullptr; if (dataGeometry != nullptr) { modifiedGeometry = dataGeometry->Clone(); } int warningLevel = vtkObject::GetGlobalWarningDisplay(); vtkObject::GlobalWarningDisplayOff(); if ((timeGeometry.IsNotNull()) && (timeGeometry->GetBoundingBoxInWorld()->GetDiagonalLength2() > mitk::eps)) { boundingBoxInitialized = true; } if (timeGeometry.IsNotNull()) { // make sure bounding box has an extent bigger than zero in any direction // clone the input geometry // Old Geometry3D::Pointer modifiedGeometry = dynamic_cast( dataGeometry->Clone().GetPointer() ); assert(modifiedGeometry.IsNotNull()); for (TimeStepType step = 0; step < modifiedGeometry->CountTimeSteps(); ++step) { BaseGeometry::BoundsArrayType newBounds = modifiedGeometry->GetGeometryForTimeStep(step)->GetBounds(); for (unsigned int dimension = 0; (2 * dimension) < newBounds.Size(); dimension++) { // check for equality but for an epsilon if (Equal(newBounds[2 * dimension], newBounds[2 * dimension + 1])) { newBounds[2 * dimension + 1] += 1; if (Equal( newBounds[2 * dimension], newBounds[2 * dimension + 1])) // newBounds will still be equal if values are beyond double precision { mitkThrow() << "One dimension of object data has zero length, please make sure you're not using numbers " "beyond double precision as coordinates."; } } } modifiedGeometry->GetGeometryForTimeStep(step)->SetBounds(newBounds); } } timeGeometry = modifiedGeometry; RenderWindowList::const_iterator it; for (it = m_RenderWindowList.cbegin(); it != m_RenderWindowList.cend(); ++it) { mitk::BaseRenderer *baseRenderer = mitk::BaseRenderer::GetInstance(it->first); baseRenderer->SetConstrainZoomingAndPanning(m_ConstrainedPanningZooming); int id = baseRenderer->GetMapperID(); if (((type == REQUEST_UPDATE_ALL) || ((type == REQUEST_UPDATE_2DWINDOWS) && (id == 1)) || ((type == REQUEST_UPDATE_3DWINDOWS) && (id == 2)))) { this->InternalViewInitialization(baseRenderer, timeGeometry, boundingBoxInitialized, id); } } if (boundingBoxInitialized) { m_TimeNavigationController->SetInputWorldTimeGeometry(timeGeometry); } m_TimeNavigationController->Update(); this->RequestUpdateAll(type); vtkObject::SetGlobalWarningDisplay(warningLevel); // Inform listeners that views have been initialized this->InvokeEvent(mitk::RenderingManagerViewsInitializedEvent()); return boundingBoxInitialized; } bool RenderingManager::InitializeViews(RequestType type) { RenderWindowList::const_iterator it; for (it = m_RenderWindowList.cbegin(); it != m_RenderWindowList.cend(); ++it) { mitk::BaseRenderer *baseRenderer = mitk::BaseRenderer::GetInstance(it->first); int id = baseRenderer->GetMapperID(); if ((type == REQUEST_UPDATE_ALL) || ((type == REQUEST_UPDATE_2DWINDOWS) && (id == 1)) || ((type == REQUEST_UPDATE_3DWINDOWS) && (id == 2))) { mitk::SliceNavigationController *nc = baseRenderer->GetSliceNavigationController(); // Re-initialize view direction nc->SetViewDirectionToDefault(); // Update the SNC nc->Update(); } } this->RequestUpdateAll(type); return true; } bool RenderingManager::InitializeView(vtkRenderWindow *renderWindow, const BaseGeometry *geometry, bool initializeGlobalTimeSNC) { ProportionalTimeGeometry::Pointer propTimeGeometry = ProportionalTimeGeometry::New(); propTimeGeometry->Initialize(dynamic_cast(geometry->Clone().GetPointer()), 1); return InitializeView(renderWindow, propTimeGeometry, initializeGlobalTimeSNC); } bool RenderingManager::InitializeView(vtkRenderWindow *renderWindow, const TimeGeometry *geometry, bool initializeGlobalTimeSNC) { bool boundingBoxInitialized = false; int warningLevel = vtkObject::GetGlobalWarningDisplay(); vtkObject::GlobalWarningDisplayOff(); if ((geometry != nullptr) && (geometry->GetBoundingBoxInWorld()->GetDiagonalLength2() > mitk::eps)) { boundingBoxInitialized = true; } mitk::BaseRenderer *baseRenderer = mitk::BaseRenderer::GetInstance(renderWindow); int id = baseRenderer->GetMapperID(); this->InternalViewInitialization(baseRenderer, geometry, boundingBoxInitialized, id); if (boundingBoxInitialized && initializeGlobalTimeSNC) { m_TimeNavigationController->SetInputWorldTimeGeometry(geometry); } m_TimeNavigationController->Update(); this->RequestUpdate(renderWindow); vtkObject::SetGlobalWarningDisplay(warningLevel); return boundingBoxInitialized; } bool RenderingManager::InitializeView(vtkRenderWindow *renderWindow) { mitk::BaseRenderer *baseRenderer = mitk::BaseRenderer::GetInstance(renderWindow); mitk::SliceNavigationController *nc = baseRenderer->GetSliceNavigationController(); // Re-initialize view direction nc->SetViewDirectionToDefault(); // Update the SNC nc->Update(); this->RequestUpdate(renderWindow); return true; } void RenderingManager::InternalViewInitialization(mitk::BaseRenderer *baseRenderer, const mitk::TimeGeometry *geometry, bool boundingBoxInitialized, int mapperID) { mitk::SliceNavigationController *nc = baseRenderer->GetSliceNavigationController(); // Re-initialize view direction nc->SetViewDirectionToDefault(); if (boundingBoxInitialized) { // Set geometry for NC nc->SetInputWorldTimeGeometry(geometry); nc->Update(); if (mapperID == BaseRenderer::Standard2D) { // For 2D SNCs, steppers are set so that the cross is centered // in the image nc->GetSlice()->SetPos(nc->GetSlice()->GetSteps() / 2); } baseRenderer->GetCameraController()->SetViewToAnterior(); baseRenderer->GetCameraController()->Fit(); } else { nc->Update(); } } const SliceNavigationController *RenderingManager::GetTimeNavigationController() const { return m_TimeNavigationController.GetPointer(); } SliceNavigationController *RenderingManager::GetTimeNavigationController() { return m_TimeNavigationController.GetPointer(); } void RenderingManager::ExecutePendingRequests() { m_UpdatePending = false; // Satisfy all pending update requests RenderWindowList::const_iterator it; int i = 0; for (it = m_RenderWindowList.cbegin(); it != m_RenderWindowList.cend(); ++it, ++i) { if (it->second == RENDERING_REQUESTED) { this->ForceImmediateUpdate(it->first); } } } void RenderingManager::RenderingStartCallback(vtkObject *caller, unsigned long, void *, void *) { auto *renderWindow = dynamic_cast(caller); mitk::RenderingManager *renman = mitk::BaseRenderer::GetInstance(renderWindow)->GetRenderingManager(); RenderWindowList &renderWindowList = renman->m_RenderWindowList; if (renderWindow) { renderWindowList[renderWindow] = RENDERING_INPROGRESS; } renman->m_UpdatePending = false; } void RenderingManager::RenderingProgressCallback(vtkObject *caller, unsigned long, void *, void *) { auto *renderWindow = dynamic_cast(caller); mitk::RenderingManager *renman = mitk::BaseRenderer::GetInstance(renderWindow)->GetRenderingManager(); if (renman->m_LODAbortMechanismEnabled) { auto *renderWindow = dynamic_cast(caller); if (renderWindow) { BaseRenderer *renderer = BaseRenderer::GetInstance(renderWindow); if (renderer && (renderer->GetNumberOfVisibleLODEnabledMappers() > 0)) { renman->DoMonitorRendering(); } } } } void RenderingManager::RenderingEndCallback(vtkObject *caller, unsigned long, void *, void *) { auto *renderWindow = dynamic_cast(caller); mitk::RenderingManager *renman = mitk::BaseRenderer::GetInstance(renderWindow)->GetRenderingManager(); RenderWindowList &renderWindowList = renman->m_RenderWindowList; RendererIntMap &nextLODMap = renman->m_NextLODMap; if (renderWindow) { BaseRenderer *renderer = BaseRenderer::GetInstance(renderWindow); if (renderer) { renderWindowList[renderer->GetRenderWindow()] = RENDERING_INACTIVE; // Level-of-Detail handling if (renderer->GetNumberOfVisibleLODEnabledMappers() > 0) { if (nextLODMap[renderer] == 0) renman->StartOrResetTimer(); else nextLODMap[renderer] = 0; } } } } bool RenderingManager::IsRendering() const { RenderWindowList::const_iterator it; for (it = m_RenderWindowList.cbegin(); it != m_RenderWindowList.cend(); ++it) { if (it->second == RENDERING_INPROGRESS) { return true; } } return false; } void RenderingManager::AbortRendering() { RenderWindowList::const_iterator it; for (it = m_RenderWindowList.cbegin(); it != m_RenderWindowList.cend(); ++it) { if (it->second == RENDERING_INPROGRESS) { it->first->SetAbortRender(true); m_RenderingAbortedMap[BaseRenderer::GetInstance(it->first)] = true; } } } int RenderingManager::GetNextLOD(BaseRenderer *renderer) { if (renderer != nullptr) { return m_NextLODMap[renderer]; } else { return 0; } } void RenderingManager::ExecutePendingHighResRenderingRequest() { RenderWindowList::const_iterator it; for (it = m_RenderWindowList.cbegin(); it != m_RenderWindowList.cend(); ++it) { BaseRenderer *renderer = BaseRenderer::GetInstance(it->first); if (renderer->GetNumberOfVisibleLODEnabledMappers() > 0) { if (m_NextLODMap[renderer] == 0) { m_NextLODMap[renderer] = 1; RequestUpdate(it->first); } } } } void RenderingManager::SetMaximumLOD(unsigned int max) { m_MaxLOD = max; } // enable/disable shading void RenderingManager::SetShading(bool state, unsigned int lod) { if (lod > m_MaxLOD) { itkWarningMacro(<< "LOD out of range requested: " << lod << " maxLOD: " << m_MaxLOD); return; } m_ShadingEnabled[lod] = state; } bool RenderingManager::GetShading(unsigned int lod) { if (lod > m_MaxLOD) { itkWarningMacro(<< "LOD out of range requested: " << lod << " maxLOD: " << m_MaxLOD); return false; } return m_ShadingEnabled[lod]; } // enable/disable the clipping plane void RenderingManager::SetClippingPlaneStatus(bool status) { m_ClippingPlaneEnabled = status; } bool RenderingManager::GetClippingPlaneStatus() { return m_ClippingPlaneEnabled; } void RenderingManager::SetShadingValues(float ambient, float diffuse, float specular, float specpower) { m_ShadingValues[0] = ambient; m_ShadingValues[1] = diffuse; m_ShadingValues[2] = specular; m_ShadingValues[3] = specpower; } RenderingManager::FloatVector &RenderingManager::GetShadingValues() { return m_ShadingValues; } void RenderingManager::InitializePropertyList() { if (m_PropertyList.IsNull()) { m_PropertyList = PropertyList::New(); } this->SetProperty("coupled-zoom", BoolProperty::New(false)); this->SetProperty("coupled-plane-rotation", BoolProperty::New(false)); this->SetProperty("MIP-slice-rendering", BoolProperty::New(false)); } PropertyList::Pointer RenderingManager::GetPropertyList() const { return m_PropertyList; } BaseProperty *RenderingManager::GetProperty(const char *propertyKey) const { return m_PropertyList->GetProperty(propertyKey); } void RenderingManager::SetProperty(const char *propertyKey, BaseProperty *propertyValue) { m_PropertyList->SetProperty(propertyKey, propertyValue); } void RenderingManager::SetDataStorage(DataStorage *storage) { if (storage != nullptr) { m_DataStorage = storage; RenderingManager::RenderWindowVector::const_iterator iter; for (iter = m_AllRenderWindows.cbegin(); iter < m_AllRenderWindows.cend(); ++iter) { mitk::BaseRenderer::GetInstance((*iter))->SetDataStorage(m_DataStorage.GetPointer()); } } } mitk::DataStorage *RenderingManager::GetDataStorage() { return m_DataStorage; } void RenderingManager::SetRenderWindowFocus(vtkRenderWindow *focusWindow) { if (focusWindow != m_FocusedRenderWindow) { if (!focusWindow || (m_RenderWindowList.find(focusWindow) != m_RenderWindowList.cend())) { m_FocusedRenderWindow = focusWindow; this->InvokeEvent(FocusChangedEvent()); return; } MITK_ERROR << "Tried to set a RenderWindow that does not exist."; } } - void RenderingManager::StartContinousUpdating(int FramesPerSecond) + void RenderingManager::StartContinousUpdating(unsigned int FramesPerSecond3DWindow, + unsigned int FramesPerSecond2DWindows) { + m_timeStep3DWindow = 1.0 / FramesPerSecond3DWindow * 1000.0; + nextUpDate3D = + std::chrono::duration_cast(std::chrono::system_clock::now().time_since_epoch()) + .count() + + m_timeStep3DWindow; + m_timeStep2DWindows = 1.0 / FramesPerSecond2DWindows * 1000.0; + nextUpDate2D = + std::chrono::duration_cast(std::chrono::system_clock::now().time_since_epoch()) + .count() + + m_timeStep2DWindows; + if (m_ThreadID == 0) { m_ThreadID = m_MultiThreader->SpawnThread(this->ThreadStartContinousUpdate, - this); // start a new thread that executes the ContinousUpdate() method + this); // start a new thread that executes the ContinousUpdate() method } } - void RenderingManager::StopContinousUpdating() - { + void RenderingManager::StopContinousUpdating() + { m_run = false; m_ThreadID = 0; } void RenderingManager::ContinousUpdate() { m_run = true; while (m_run) { - Sleep(50); - this->RequestUpdateAll(); + Sleep(20); + long now = + std::chrono::duration_cast(std::chrono::system_clock::now().time_since_epoch()) + .count(); + if (now > nextUpDate2D) + { + nextUpDate2D += m_timeStep2DWindows; + mitk::RenderingManager::GetInstance()->RequestUpdateAll(mitk::RenderingManager::REQUEST_UPDATE_2DWINDOWS); + } + if (now > nextUpDate3D) + { + nextUpDate3D += m_timeStep3DWindow; + mitk::RenderingManager::GetInstance()->RequestUpdateAll(mitk::RenderingManager::REQUEST_UPDATE_3DWINDOWS); + } } } ITK_THREAD_RETURN_TYPE RenderingManager::ThreadStartContinousUpdate(void *pInfoStruct) { /* extract this pointer from Thread Info structure */ struct itk::MultiThreader::ThreadInfoStruct *pInfo = (struct itk::MultiThreader::ThreadInfoStruct *)pInfoStruct; if (pInfo == nullptr) { return ITK_THREAD_RETURN_VALUE; } if (pInfo->UserData == nullptr) { return ITK_THREAD_RETURN_VALUE; } RenderingManager *renderingManager = (RenderingManager *)pInfo->UserData; if (renderingManager != nullptr) renderingManager->ContinousUpdate(); return ITK_THREAD_RETURN_VALUE; } // Create and register generic RenderingManagerFactory. TestingRenderingManagerFactory renderingManagerFactory; } // namespace diff --git a/Plugins/org.mitk.gui.qt.igttracking/src/internal/QmitkMITKIGTTrackingToolboxView.cpp b/Plugins/org.mitk.gui.qt.igttracking/src/internal/QmitkMITKIGTTrackingToolboxView.cpp index 45a3af5159..eeb6b59b03 100644 --- a/Plugins/org.mitk.gui.qt.igttracking/src/internal/QmitkMITKIGTTrackingToolboxView.cpp +++ b/Plugins/org.mitk.gui.qt.igttracking/src/internal/QmitkMITKIGTTrackingToolboxView.cpp @@ -1,1428 +1,1430 @@ /*=================================================================== The Medical Imaging Interaction Toolkit (MITK) Copyright (c) German Cancer Research Center, Division of Medical and Biological Informatics. All rights reserved. This software is distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See LICENSE.txt or http://www.mitk.org for details. ===================================================================*/ // Blueberry #include #include // Qmitk #include "QmitkMITKIGTTrackingToolboxView.h" // Qt #include #include #include // MITK #include #include #include #include #include #include #include #include #include #include //for exceptions #include #include #include "mitkPluginActivator.h" const std::string QmitkMITKIGTTrackingToolboxView::VIEW_ID = "org.mitk.views.mitkigttrackingtoolbox"; QmitkMITKIGTTrackingToolboxView::QmitkMITKIGTTrackingToolboxView() : QmitkAbstractView() , m_Controls(nullptr) , m_DeviceTypeCollection(nullptr) , m_ToolProjectionNode(nullptr) { m_TrackingLoggingTimer = new QTimer(this); m_TrackingRenderTimer = new QTimer(this); m_TimeoutTimer = new QTimer(this); m_tracking = false; m_connected = false; m_logging = false; m_ShowHideToolAxis = false; m_loggedFrames = 0; m_SimpleModeEnabled = false; m_NeedleProjectionFilter = mitk::NeedleProjectionFilter::New(); //create filename for autosaving of tool storage QString loggingPathWithoutFilename = QString(mitk::LoggingBackend::GetLogFile().c_str()); if (!loggingPathWithoutFilename.isEmpty()) //if there already is a path for the MITK logging file use this one { //extract path from path+filename (if someone knows a better way to do this feel free to change it) int lengthOfFilename = QFileInfo(QString::fromStdString(mitk::LoggingBackend::GetLogFile())).fileName().size(); loggingPathWithoutFilename.resize(loggingPathWithoutFilename.size() - lengthOfFilename); m_AutoSaveFilename = loggingPathWithoutFilename + "TrackingToolboxAutoSave.IGTToolStorage"; } else //if not: use a temporary path from IOUtil { m_AutoSaveFilename = QString(mitk::IOUtil::GetTempPath().c_str()) + "TrackingToolboxAutoSave.IGTToolStorage"; } MITK_INFO("IGT Tracking Toolbox") << "Filename for auto saving of IGT ToolStorages: " << m_AutoSaveFilename.toStdString(); //! [Thread 1] //initialize worker thread m_WorkerThread = new QThread(); m_Worker = new QmitkMITKIGTTrackingToolboxViewWorker(); //! [Thread 1] ctkPluginContext* pluginContext = mitk::PluginActivator::GetContext(); if (pluginContext) { QString interfaceName = QString::fromStdString(us_service_interface_iid()); QList serviceReference = pluginContext->getServiceReferences(interfaceName); if (serviceReference.size() > 0) { m_DeviceTypeServiceReference = serviceReference.at(0); const ctkServiceReference& r = serviceReference.at(0); m_DeviceTypeCollection = pluginContext->getService(r); } else { MITK_INFO << "No Tracking Device Collection!"; } } } QmitkMITKIGTTrackingToolboxView::~QmitkMITKIGTTrackingToolboxView() { this->StoreUISettings(); m_TrackingLoggingTimer->stop(); m_TrackingRenderTimer->stop(); m_TimeoutTimer->stop(); delete m_TrackingLoggingTimer; delete m_TrackingRenderTimer; delete m_TimeoutTimer; try { //! [Thread 2] // wait for thread to finish m_WorkerThread->terminate(); m_WorkerThread->wait(); //clean up worker thread if (m_WorkerThread) { delete m_WorkerThread; } if (m_Worker) { delete m_Worker; } //! [Thread 2] //remove the tracking volume this->GetDataStorage()->Remove(m_TrackingVolumeNode); //unregister microservices if (m_toolStorage) { m_toolStorage->UnRegisterMicroservice(); } if (m_IGTLMessageProvider.IsNotNull()){ m_IGTLMessageProvider->UnRegisterMicroservice(); } } catch (std::exception& e) { MITK_WARN << "Unexpected exception during clean up of tracking toolbox view: " << e.what(); } catch (...) { MITK_WARN << "Unexpected unknown error during clean up of tracking toolbox view!"; } //store tool storage and UI settings for persistence this->AutoSaveToolStorage(); this->StoreUISettings(); m_DeviceTypeCollection = nullptr; mitk::PluginActivator::GetContext()->ungetService(m_DeviceTypeServiceReference); } void QmitkMITKIGTTrackingToolboxView::CreateQtPartControl(QWidget *parent) { // build up qt view, unless already done if (!m_Controls) { // create GUI widgets from the Qt Designer's .ui file m_Controls = new Ui::QmitkMITKIGTTrackingToolboxViewControls; m_Controls->setupUi(parent); //create connections connect(m_Controls->m_LoadTools, SIGNAL(clicked()), this, SLOT(OnLoadTools())); connect(m_Controls->m_ConnectDisconnectButton, SIGNAL(clicked()), this, SLOT(OnConnectDisconnect())); connect(m_Controls->m_StartStopTrackingButton, SIGNAL(clicked()), this, SLOT(OnStartStopTracking())); connect(m_Controls->m_ConnectSimpleMode, SIGNAL(clicked()), this, SLOT(OnConnectDisconnect())); connect(m_Controls->m_StartTrackingSimpleMode, SIGNAL(clicked()), this, SLOT(OnStartStopTracking())); connect(m_Controls->m_FreezeUnfreezeTrackingButton, SIGNAL(clicked()), this, SLOT(OnFreezeUnfreezeTracking())); connect(m_TrackingLoggingTimer, SIGNAL(timeout()), this, SLOT(UpdateLoggingTrackingTimer())); connect(m_TrackingRenderTimer, SIGNAL(timeout()), this, SLOT(UpdateRenderTrackingTimer())); connect(m_TimeoutTimer, SIGNAL(timeout()), this, SLOT(OnTimeOut())); connect(m_Controls->m_ChooseFile, SIGNAL(clicked()), this, SLOT(OnChooseFileClicked())); connect(m_Controls->m_StartLogging, SIGNAL(clicked()), this, SLOT(StartLogging())); connect(m_Controls->m_StopLogging, SIGNAL(clicked()), this, SLOT(StopLogging())); connect(m_Controls->m_VolumeSelectionBox, SIGNAL(currentIndexChanged(QString)), this, SLOT(OnTrackingVolumeChanged(QString))); connect(m_Controls->m_ShowTrackingVolume, SIGNAL(clicked()), this, SLOT(OnShowTrackingVolumeChanged())); connect(m_Controls->m_AutoDetectTools, SIGNAL(clicked()), this, SLOT(OnAutoDetectTools())); connect(m_Controls->m_ResetTools, SIGNAL(clicked()), this, SLOT(OnResetTools())); connect(m_Controls->m_AddSingleTool, SIGNAL(clicked()), this, SLOT(OnAddSingleTool())); connect(m_Controls->m_NavigationToolCreationWidget, SIGNAL(NavigationToolFinished()), this, SLOT(OnAddSingleToolFinished())); connect(m_Controls->m_NavigationToolCreationWidget, SIGNAL(Canceled()), this, SLOT(OnAddSingleToolCanceled())); connect(m_Controls->m_CsvFormat, SIGNAL(clicked()), this, SLOT(OnToggleFileExtension())); connect(m_Controls->m_XmlFormat, SIGNAL(clicked()), this, SLOT(OnToggleFileExtension())); connect(m_Controls->m_UseDifferentUpdateRates, SIGNAL(clicked()), this, SLOT(OnToggleDifferentUpdateRates())); connect(m_Controls->m_RenderUpdateRate, SIGNAL(valueChanged(int)), this, SLOT(OnChangeRenderUpdateRate())); connect(m_Controls->m_DisableAllTimers, SIGNAL(stateChanged(int)), this, SLOT(EnableDisableTimerButtons(int))); connect(m_Controls->m_advancedUI, SIGNAL(clicked()), this, SLOT(OnToggleAdvancedSimpleMode())); connect(m_Controls->m_SimpleUI, SIGNAL(clicked()), this, SLOT(OnToggleAdvancedSimpleMode())); connect(m_Controls->showHideToolProjectionCheckBox, SIGNAL(clicked()), this, SLOT(OnShowHideToolProjectionClicked())); connect(m_Controls->showHideToolAxisCheckBox, SIGNAL(clicked()), this, SLOT(OnShowHideToolAxisClicked())); connect(m_Controls->m_toolselector, SIGNAL(currentIndexChanged(int)), this, SLOT(SelectToolProjection(int))); //connections for the tracking device configuration widget connect(m_Controls->m_ConfigurationWidget, SIGNAL(TrackingDeviceSelectionChanged()), this, SLOT(OnTrackingDeviceChanged())); //! [Thread 3] //connect worker thread connect(m_Worker, SIGNAL(AutoDetectToolsFinished(bool, QString)), this, SLOT(OnAutoDetectToolsFinished(bool, QString))); connect(m_Worker, SIGNAL(ConnectDeviceFinished(bool, QString)), this, SLOT(OnConnectFinished(bool, QString))); connect(m_Worker, SIGNAL(StartTrackingFinished(bool, QString)), this, SLOT(OnStartTrackingFinished(bool, QString))); connect(m_Worker, SIGNAL(StopTrackingFinished(bool, QString)), this, SLOT(OnStopTrackingFinished(bool, QString))); connect(m_Worker, SIGNAL(DisconnectDeviceFinished(bool, QString)), this, SLOT(OnDisconnectFinished(bool, QString))); connect(m_WorkerThread, SIGNAL(started()), m_Worker, SLOT(ThreadFunc())); connect(m_Worker, SIGNAL(ConnectDeviceFinished(bool, QString)), m_Controls->m_ConfigurationWidget, SLOT(OnConnected(bool))); connect(m_Worker, SIGNAL(DisconnectDeviceFinished(bool, QString)), m_Controls->m_ConfigurationWidget, SLOT(OnDisconnected(bool))); connect(m_Worker, SIGNAL(StartTrackingFinished(bool, QString)), m_Controls->m_ConfigurationWidget, SLOT(OnStartTracking(bool))); connect(m_Worker, SIGNAL(StopTrackingFinished(bool, QString)), m_Controls->m_ConfigurationWidget, SLOT(OnStopTracking(bool))); //Add Listener, so that we know when the toolStorage changed. std::string m_Filter = "(" + us::ServiceConstants::OBJECTCLASS() + "=" + "org.mitk.services.NavigationToolStorage" + ")"; mitk::PluginActivator::GetContext()->connectServiceListener(this, "OnToolStorageChanged", QString(m_Filter.c_str())); //move the worker to the thread m_Worker->moveToThread(m_WorkerThread); //! [Thread 3] //initialize widgets m_Controls->m_TrackingToolsStatusWidget->SetShowPositions(true); m_Controls->m_TrackingToolsStatusWidget->SetTextAlignment(Qt::AlignLeft); m_Controls->m_simpleWidget->setVisible(false); //initialize tracking volume node m_TrackingVolumeNode = mitk::DataNode::New(); m_TrackingVolumeNode->SetName("TrackingVolume"); m_TrackingVolumeNode->SetBoolProperty("Backface Culling", true); mitk::Color red; red.SetRed(1); m_TrackingVolumeNode->SetColor(red); //initialize buttons m_Controls->m_AutoDetectTools->setVisible(false); //only visible if supported by tracking device m_Controls->m_StartStopTrackingButton->setEnabled(false); m_Controls->m_StartTrackingSimpleMode->setEnabled(false); m_Controls->m_FreezeUnfreezeTrackingButton->setEnabled(false); //initialize warning labels m_Controls->m_RenderWarningLabel->setVisible(false); m_Controls->m_TrackingFrozenLabel->setVisible(false); //Update List of available models for selected tool. std::vector Compatibles; if ((m_Controls == nullptr) || //check all these stuff for NULL, latterly this causes crashes from time to time (m_Controls->m_ConfigurationWidget == nullptr) || (m_Controls->m_ConfigurationWidget->GetTrackingDevice().IsNull())) { MITK_ERROR << "Couldn't get current tracking device or an object is nullptr, something went wrong!"; return; } else { Compatibles = m_DeviceTypeCollection->GetDeviceDataForLine(m_Controls->m_ConfigurationWidget->GetTrackingDevice()->GetType()); } m_Controls->m_VolumeSelectionBox->clear(); for (std::size_t i = 0; i < Compatibles.size(); i++) { m_Controls->m_VolumeSelectionBox->addItem(Compatibles[i].Model.c_str()); } //initialize tool storage m_toolStorage = mitk::NavigationToolStorage::New(GetDataStorage()); m_toolStorage->SetName("TrackingToolbox Default Storage"); m_toolStorage->RegisterAsMicroservice(); //set home directory as default path for logfile m_Controls->m_LoggingFileName->setText(QDir::toNativeSeparators(QDir::homePath()) + QDir::separator() + "logfile.csv"); //tracking device may be changed already by the persistence of the //QmitkTrackingDeciveConfigurationWidget this->OnTrackingDeviceChanged(); this->LoadUISettings(); //add tracking volume node only to data storage this->GetDataStorage()->Add(m_TrackingVolumeNode); if (!m_Controls->m_ShowTrackingVolume->isChecked()) m_TrackingVolumeNode->SetOpacity(0.0); else m_TrackingVolumeNode->SetOpacity(0.25); //Update List of available models for selected tool. m_Controls->m_VolumeSelectionBox->clear(); for (std::size_t i = 0; i < Compatibles.size(); i++) { m_Controls->m_VolumeSelectionBox->addItem(Compatibles[i].Model.c_str()); } } } void QmitkMITKIGTTrackingToolboxView::OnLoadTools() { //read in filename QString filename = QFileDialog::getOpenFileName(nullptr, tr("Open Tool Storage"), "/", tr("Tool Storage Files (*.IGTToolStorage)")); if (filename.isNull()) return; //read tool storage from disk std::string errorMessage = ""; mitk::NavigationToolStorageDeserializer::Pointer myDeserializer = mitk::NavigationToolStorageDeserializer::New(GetDataStorage()); // try-catch block for exceptions try { this->ReplaceCurrentToolStorage(myDeserializer->Deserialize(filename.toStdString()), filename.toStdString()); } catch (mitk::IGTException) { std::string errormessage = "Error during loading the tool storage file. Please only load tool storage files created with the NavigationToolManager view."; QMessageBox::warning(nullptr, "Tool Storage Loading Error", errormessage.c_str()); return; } if (m_toolStorage->isEmpty()) { errorMessage = myDeserializer->GetErrorMessage(); MessageBox(errorMessage); return; } //update label UpdateToolStorageLabel(filename); //update tool preview m_Controls->m_TrackingToolsStatusWidget->RemoveStatusLabels(); m_Controls->m_TrackingToolsStatusWidget->PreShowTools(m_toolStorage); //save filename for persistent storage m_ToolStorageFilename = filename; } void QmitkMITKIGTTrackingToolboxView::OnResetTools() { //remove data nodes of surfaces from data storage to clean up for (unsigned int i = 0; i < m_toolStorage->GetToolCount(); i++) { this->GetDataStorage()->Remove(m_toolStorage->GetTool(i)->GetDataNode()); } this->ReplaceCurrentToolStorage(mitk::NavigationToolStorage::New(GetDataStorage()), "TrackingToolbox Default Storage"); m_Controls->m_TrackingToolsStatusWidget->RemoveStatusLabels(); QString toolLabel = QString(""); m_Controls->m_ToolLabel->setText(toolLabel); m_ToolStorageFilename = ""; RemoveAllToolProjections(); } void QmitkMITKIGTTrackingToolboxView::OnStartStopTracking() { if (!m_connected) { MITK_WARN << "Can't start tracking if no device is connected. Aborting"; return; } if (m_tracking) { OnStopTracking(); } else { OnStartTracking(); } } void QmitkMITKIGTTrackingToolboxView::OnFreezeUnfreezeTracking() { if (m_Controls->m_FreezeUnfreezeTrackingButton->text() == "Freeze Tracking") { m_Worker->GetTrackingDeviceSource()->Freeze(); m_Controls->m_FreezeUnfreezeTrackingButton->setText("Unfreeze Tracking"); m_Controls->m_TrackingFrozenLabel->setVisible(true); } else if (m_Controls->m_FreezeUnfreezeTrackingButton->text() == "Unfreeze Tracking") { m_Worker->GetTrackingDeviceSource()->UnFreeze(); m_Controls->m_FreezeUnfreezeTrackingButton->setText("Freeze Tracking"); m_Controls->m_TrackingFrozenLabel->setVisible(false); } } void QmitkMITKIGTTrackingToolboxView::ShowToolProjection(int index) { mitk::DataNode::Pointer toolnode = m_toolStorage->GetTool(index)->GetDataNode(); QString ToolProjectionName = "ToolProjection" + QString::number(index); m_ToolProjectionNode = this->GetDataStorage()->GetNamedNode(ToolProjectionName.toStdString()); //If node does not exist, create the node for the Pointset if (m_ToolProjectionNode.IsNull()) { m_ToolProjectionNode = mitk::DataNode::New(); m_ToolProjectionNode->SetName(ToolProjectionName.toStdString()); if (index < static_cast(m_NeedleProjectionFilter->GetNumberOfInputs())) { m_NeedleProjectionFilter->SelectInput(index); m_NeedleProjectionFilter->Update(); m_ToolProjectionNode->SetData(m_NeedleProjectionFilter->GetProjection()); m_ToolProjectionNode->SetBoolProperty("show contour", true); this->GetDataStorage()->Add(m_ToolProjectionNode, toolnode); } // this->FireNodeSelected(node); } else { m_ToolProjectionNode->SetBoolProperty("show contour", true); } } void QmitkMITKIGTTrackingToolboxView::RemoveAllToolProjections() { for (size_t i = 0; i < m_toolStorage->GetToolCount(); i++) { QString toolProjectionName = "ToolProjection" + QString::number(i); mitk::DataNode::Pointer node = this->GetDataStorage()->GetNamedNode(toolProjectionName.toStdString()); //Deactivate and hide the tool projection if (!node.IsNull()) { this->GetDataStorage()->Remove(node); } } } void QmitkMITKIGTTrackingToolboxView::SelectToolProjection(int idx) { if (m_Controls->showHideToolProjectionCheckBox->isChecked()) { //Deactivate and hide the tool projection if (!m_ToolProjectionNode.IsNull()) { this->GetDataStorage()->Remove(m_ToolProjectionNode); } if (m_NeedleProjectionFilter.IsNotNull()) { m_NeedleProjectionFilter->Update(); } //Refresh the view and the status widget mitk::RenderingManager::GetInstance()->RequestUpdateAll(); // Show the tool projection for the currently selected tool ShowToolProjection(idx); } } void QmitkMITKIGTTrackingToolboxView::OnShowHideToolProjectionClicked() { int index = m_Controls->m_toolselector->currentIndex(); //Activate and show the tool projection if (m_Controls->showHideToolProjectionCheckBox->isChecked()) { ShowToolProjection(index); m_Controls->showHideToolAxisCheckBox->setEnabled(true); } else { RemoveAllToolProjections(); m_Controls->showHideToolAxisCheckBox->setEnabled(false); } if( m_NeedleProjectionFilter.IsNotNull() ) { m_NeedleProjectionFilter->Update(); } //Refresh the view and the status widget mitk::RenderingManager::GetInstance()->RequestUpdateAll(); // m_Controls->m_TrackingToolsStatusWidget->Refresh(); } void QmitkMITKIGTTrackingToolboxView::OnShowHideToolAxisClicked() { if( !m_ShowHideToolAxis ) { //Activate and show the tool axis m_NeedleProjectionFilter->ShowToolAxis(true); m_ShowHideToolAxis = true; } else { //Deactivate and hide the tool axis m_NeedleProjectionFilter->ShowToolAxis(false); m_NeedleProjectionFilter->GetProjection()->RemovePointIfExists(2); m_ShowHideToolAxis = false; } //Update the filter if( m_NeedleProjectionFilter.IsNotNull() ) { m_NeedleProjectionFilter->Update(); } //Refresh the view and the status widget mitk::RenderingManager::GetInstance()->RequestUpdateAll(); // m_Controls->m_TrackingToolsStatusWidget->Refresh(); } void QmitkMITKIGTTrackingToolboxView::OnConnectDisconnect() { if (m_connected) { OnDisconnect(); } else { OnConnect(); } } void QmitkMITKIGTTrackingToolboxView::OnConnect() { MITK_DEBUG << "Connect Clicked"; //check if everything is ready to start tracking if (this->m_toolStorage.IsNull()) { MessageBox("Error: No Tools Loaded Yet!"); return; } else if (this->m_toolStorage->GetToolCount() == 0) { MessageBox("Error: No Way To Track Without Tools!"); return; } //parse tracking device data mitk::TrackingDeviceData data = mitk::UnspecifiedTrackingTypeInformation::GetDeviceDataUnspecified(); QString qstr = m_Controls->m_VolumeSelectionBox->currentText(); if ((!qstr.isNull()) || (!qstr.isEmpty())) { std::string str = qstr.toStdString(); data = m_DeviceTypeCollection->GetDeviceDataByName(str); //Data will be set later, after device generation } //! [Thread 4] //initialize worker thread m_Worker->SetWorkerMethod(QmitkMITKIGTTrackingToolboxViewWorker::eConnectDevice); m_Worker->SetTrackingDevice(this->m_Controls->m_ConfigurationWidget->GetTrackingDevice()); m_Worker->SetInverseMode(m_Controls->m_InverseMode->isChecked()); m_Worker->SetNavigationToolStorage(this->m_toolStorage); m_Worker->SetTrackingDeviceData(data); //start worker thread m_WorkerThread->start(); //! [Thread 4] //disable buttons this->m_Controls->m_MainWidget->setEnabled(false); } void QmitkMITKIGTTrackingToolboxView::EnableDisableTimerButtons(int enable) { bool enableBool = enable; m_Controls->m_UpdateRateOptionsGroupBox->setEnabled(!enableBool); m_Controls->m_RenderWarningLabel->setVisible(enableBool); } void QmitkMITKIGTTrackingToolboxView::OnConnectFinished(bool success, QString errorMessage) { m_WorkerThread->quit(); m_WorkerThread->wait(); //enable buttons this->m_Controls->m_MainWidget->setEnabled(true); if (!success) { MITK_WARN << errorMessage.toStdString(); MessageBox(errorMessage.toStdString()); return; } //! [Thread 6] //get data from worker thread m_TrackingDeviceData = m_Worker->GetTrackingDeviceData(); m_ToolVisualizationFilter = m_Worker->GetToolVisualizationFilter(); if( m_ToolVisualizationFilter.IsNotNull() ) { //Connect the NeedleProjectionFilter to the ToolVisualizationFilter as third filter of the IGT pipeline m_NeedleProjectionFilter->ConnectTo(m_ToolVisualizationFilter); if (m_Controls->showHideToolProjectionCheckBox->isChecked()) { ShowToolProjection(m_Controls->m_toolselector->currentIndex()); } } //! [Thread 6] //enable/disable Buttons DisableOptionsButtons(); DisableTrackingConfigurationButtons(); m_Controls->m_TrackingControlLabel->setText("Status: connected"); m_Controls->m_ConnectDisconnectButton->setText("Disconnect"); m_Controls->m_ConnectSimpleMode->setText("Disconnect"); m_Controls->m_StartStopTrackingButton->setEnabled(true); m_Controls->m_StartTrackingSimpleMode->setEnabled(true); m_connected = true; //During connection, thi sourceID of the tool storage changed. However, Microservice can't be updated on a different thread. //UpdateMicroservice is necessary to use filter to get the right storage belonging to a source. //Don't do it before m_connected is true, as we don't want to call content of OnToolStorageChanged. m_toolStorage->UpdateMicroservice(); } void QmitkMITKIGTTrackingToolboxView::OnDisconnect() { m_Worker->SetWorkerMethod(QmitkMITKIGTTrackingToolboxViewWorker::eDisconnectDevice); m_WorkerThread->start(); m_Controls->m_MainWidget->setEnabled(false); } void QmitkMITKIGTTrackingToolboxView::OnDisconnectFinished(bool success, QString errorMessage) { m_WorkerThread->quit(); m_WorkerThread->wait(); m_Controls->m_MainWidget->setEnabled(true); if (!success) { MITK_WARN << errorMessage.toStdString(); MessageBox(errorMessage.toStdString()); return; } //enable/disable Buttons m_Controls->m_StartStopTrackingButton->setEnabled(false); m_Controls->m_StartTrackingSimpleMode->setEnabled(false); EnableOptionsButtons(); EnableTrackingConfigurationButtons(); m_Controls->m_TrackingControlLabel->setText("Status: disconnected"); m_Controls->m_ConnectDisconnectButton->setText("Connect"); m_Controls->m_ConnectSimpleMode->setText("Connect"); m_Controls->m_FreezeUnfreezeTrackingButton->setText("Freeze Tracking"); m_Controls->m_TrackingFrozenLabel->setVisible(false); m_connected = false; } void QmitkMITKIGTTrackingToolboxView::OnStartTracking() { //show tracking volume this->OnTrackingVolumeChanged(m_Controls->m_VolumeSelectionBox->currentText()); //Reset the view to a defined start. Do it here and not in OnStartTrackingFinished, to give other tracking devices the chance to reset the view to a different direction. this->GlobalReinit(); m_Worker->SetWorkerMethod(QmitkMITKIGTTrackingToolboxViewWorker::eStartTracking); m_WorkerThread->start(); this->m_Controls->m_MainWidget->setEnabled(false); } void QmitkMITKIGTTrackingToolboxView::OnStartTrackingFinished(bool success, QString errorMessage) { //! [Thread 5] m_WorkerThread->quit(); m_WorkerThread->wait(); //! [Thread 5] this->m_Controls->m_MainWidget->setEnabled(true); if (!success) { MessageBox(errorMessage.toStdString()); MITK_WARN << errorMessage.toStdString(); return; } - mitk::RenderingManager::GetInstance()->StartContinousUpdating(m_Controls->m_RenderUpdateRate->value()); + mitk::RenderingManager::GetInstance()->StartContinousUpdating(); + //mitk::RenderingManager::GetInstance()->StartContinousUpdating(m_Controls->m_RenderUpdateRate->value(), + // m_Controls->m_RenderUpdateRate->value()); if (!(m_Controls->m_DisableAllTimers->isChecked())) { if (m_Controls->m_UseDifferentUpdateRates->isChecked()) { if (m_Controls->m_RenderUpdateRate->value() != 0) m_TrackingRenderTimer->start(1000 / (m_Controls->m_RenderUpdateRate->value())); m_TrackingLoggingTimer->start(1000 / (m_Controls->m_LogUpdateRate->value())); } else { m_TrackingRenderTimer->start(1000 / (m_Controls->m_UpdateRate->value())); m_TrackingLoggingTimer->start(1000 / (m_Controls->m_UpdateRate->value())); } } m_Controls->m_TrackingControlLabel->setText("Status: tracking"); //connect the tool visualization widget for (std::size_t i = 0; i < m_Worker->GetTrackingDeviceSource()->GetNumberOfOutputs(); i++) { m_Controls->m_TrackingToolsStatusWidget->AddNavigationData(m_Worker->GetTrackingDeviceSource()->GetOutput(i)); } m_Controls->m_TrackingToolsStatusWidget->ShowStatusLabels(); if (m_Controls->m_ShowToolQuaternions->isChecked()) { m_Controls->m_TrackingToolsStatusWidget->SetShowQuaternions(true); } else { m_Controls->m_TrackingToolsStatusWidget->SetShowQuaternions(false); } //if activated enable open IGT link microservice if (m_Controls->m_EnableOpenIGTLinkMicroService->isChecked()) { //create convertion filter m_IGTLConversionFilter = mitk::NavigationDataToIGTLMessageFilter::New(); m_IGTLConversionFilter->SetName("IGT Tracking Toolbox"); QString dataModeSelection = this->m_Controls->m_OpenIGTLinkDataFormat->currentText(); if (dataModeSelection == "TDATA") { m_IGTLConversionFilter->SetOperationMode(mitk::NavigationDataToIGTLMessageFilter::ModeSendTDataMsg); } else if (dataModeSelection == "TRANSFORM") { m_IGTLConversionFilter->SetOperationMode(mitk::NavigationDataToIGTLMessageFilter::ModeSendTransMsg); } else if (dataModeSelection == "QTDATA") { m_IGTLConversionFilter->SetOperationMode(mitk::NavigationDataToIGTLMessageFilter::ModeSendQTDataMsg); } else if (dataModeSelection == "POSITION") { m_IGTLConversionFilter->SetOperationMode(mitk::NavigationDataToIGTLMessageFilter::ModeSendQTransMsg); } m_IGTLConversionFilter->ConnectTo(m_ToolVisualizationFilter); m_IGTLConversionFilter->RegisterAsMicroservice(); //create server and message provider m_IGTLServer = mitk::IGTLServer::New(false); m_IGTLServer->SetName("Tracking Toolbox IGTL Server"); m_IGTLMessageProvider = mitk::IGTLMessageProvider::New(); m_IGTLMessageProvider->SetIGTLDevice(m_IGTLServer); m_IGTLMessageProvider->RegisterAsMicroservice(); } m_tracking = true; m_Controls->m_ConnectDisconnectButton->setEnabled(false); m_Controls->m_StartStopTrackingButton->setText("Stop Tracking"); m_Controls->m_StartTrackingSimpleMode->setText("Stop\nTracking"); m_Controls->m_FreezeUnfreezeTrackingButton->setEnabled(true); } void QmitkMITKIGTTrackingToolboxView::OnStopTracking() { if (!m_tracking) return; for (unsigned int i = 0; i < m_ToolVisualizationFilter->GetNumberOfIndexedOutputs(); i++) { mitk::NavigationData::Pointer currentTool = m_ToolVisualizationFilter->GetOutput(i); if (currentTool->IsDataValid()) { this->m_toolStorage->GetTool(i)->GetDataNode()->SetColor(mitk::IGTColor_INVALID); } } //refresh view and status widget mitk::RenderingManager::GetInstance()->RequestUpdateAll(); m_TrackingRenderTimer->stop(); m_TrackingLoggingTimer->stop(); m_Worker->SetWorkerMethod(QmitkMITKIGTTrackingToolboxViewWorker::eStopTracking); m_WorkerThread->start(); m_Controls->m_MainWidget->setEnabled(false); } void QmitkMITKIGTTrackingToolboxView::OnStopTrackingFinished(bool success, QString errorMessage) { m_WorkerThread->quit(); m_WorkerThread->wait(); m_Controls->m_MainWidget->setEnabled(true); if (!success) { MessageBox(errorMessage.toStdString()); MITK_WARN << errorMessage.toStdString(); return; } m_Controls->m_TrackingControlLabel->setText("Status: connected"); if (m_logging) StopLogging(); m_Controls->m_TrackingToolsStatusWidget->RemoveStatusLabels(); m_Controls->m_TrackingToolsStatusWidget->PreShowTools(m_toolStorage); m_tracking = false; m_Controls->m_StartStopTrackingButton->setText("Start Tracking"); m_Controls->m_StartTrackingSimpleMode->setText("Start\nTracking"); m_Controls->m_ConnectDisconnectButton->setEnabled(true); m_Controls->m_FreezeUnfreezeTrackingButton->setEnabled(false); //unregister open IGT link micro service if (m_Controls->m_EnableOpenIGTLinkMicroService->isChecked()) { m_IGTLConversionFilter->UnRegisterMicroservice(); m_IGTLMessageProvider->UnRegisterMicroservice(); } //mitk::RenderingManager::GetInstance()->StopContinousUpdating(); } void QmitkMITKIGTTrackingToolboxView::OnTrackingDeviceChanged() { mitk::TrackingDeviceType Type; if (m_Controls->m_ConfigurationWidget->GetTrackingDevice().IsNotNull()) { Type = m_Controls->m_ConfigurationWidget->GetTrackingDevice()->GetType(); //enable controls because device is valid m_Controls->m_TrackingToolsFrame->setEnabled(true); m_Controls->m_TrackingControlsFrame->setEnabled(true); } else { Type = mitk::UnspecifiedTrackingTypeInformation::GetTrackingDeviceName(); MessageBox("Error: This tracking device is not included in this project. Please make sure that the device is installed and activated in your MITK build."); m_Controls->m_TrackingToolsFrame->setEnabled(false); m_Controls->m_TrackingControlsFrame->setEnabled(false); return; } // Code to enable/disable device specific buttons if (m_Controls->m_ConfigurationWidget->GetTrackingDevice()->AutoDetectToolsAvailable()) { m_Controls->m_AutoDetectTools->setVisible(true); } else { m_Controls->m_AutoDetectTools->setVisible(false); } m_Controls->m_AddSingleTool->setEnabled(this->m_Controls->m_ConfigurationWidget->GetTrackingDevice()->AddSingleToolIsAvailable()); // Code to select appropriate tracking volume for current type std::vector Compatibles = m_DeviceTypeCollection->GetDeviceDataForLine(Type); m_Controls->m_VolumeSelectionBox->clear(); for (std::size_t i = 0; i < Compatibles.size(); i++) { m_Controls->m_VolumeSelectionBox->addItem(Compatibles[i].Model.c_str()); } } void QmitkMITKIGTTrackingToolboxView::OnTrackingVolumeChanged(QString qstr) { if (qstr.isNull()) return; if (qstr.isEmpty()) return; mitk::TrackingVolumeGenerator::Pointer volumeGenerator = mitk::TrackingVolumeGenerator::New(); std::string str = qstr.toStdString(); mitk::TrackingDeviceData data = m_DeviceTypeCollection->GetDeviceDataByName(str); m_TrackingDeviceData = data; volumeGenerator->SetTrackingDeviceData(data); volumeGenerator->Update(); mitk::Surface::Pointer volumeSurface = volumeGenerator->GetOutput(); m_TrackingVolumeNode->SetData(volumeSurface); if (!m_Controls->m_ShowTrackingVolume->isChecked()) m_TrackingVolumeNode->SetOpacity(0.0); else m_TrackingVolumeNode->SetOpacity(0.25); GlobalReinit(); } void QmitkMITKIGTTrackingToolboxView::OnShowTrackingVolumeChanged() { if (m_Controls->m_ShowTrackingVolume->isChecked()) { OnTrackingVolumeChanged(m_Controls->m_VolumeSelectionBox->currentText()); m_TrackingVolumeNode->SetOpacity(0.25); } else { m_TrackingVolumeNode->SetOpacity(0.0); } } void QmitkMITKIGTTrackingToolboxView::OnAutoDetectTools() { if (m_Controls->m_ConfigurationWidget->GetTrackingDevice()->AutoDetectToolsAvailable()) { DisableTrackingConfigurationButtons(); m_Worker->SetWorkerMethod(QmitkMITKIGTTrackingToolboxViewWorker::eAutoDetectTools); m_Worker->SetTrackingDevice(m_Controls->m_ConfigurationWidget->GetTrackingDevice().GetPointer()); m_Worker->SetDataStorage(this->GetDataStorage()); m_WorkerThread->start(); m_TimeoutTimer->start(30000); //disable controls until worker thread is finished this->m_Controls->m_MainWidget->setEnabled(false); } } void QmitkMITKIGTTrackingToolboxView::OnAutoDetectToolsFinished(bool success, QString errorMessage) { //Check, if the thread is running. There might have been a timeOut inbetween and this causes crashes... if (m_WorkerThread->isRunning()) { m_TimeoutTimer->stop(); m_WorkerThread->quit(); m_WorkerThread->wait(); } //enable controls again this->m_Controls->m_MainWidget->setEnabled(true); EnableTrackingConfigurationButtons(); if (!success) { MITK_WARN << errorMessage.toStdString(); MessageBox(errorMessage.toStdString()); EnableTrackingConfigurationButtons(); return; } mitk::NavigationToolStorage::Pointer autoDetectedStorage = m_Worker->GetNavigationToolStorage(); //save detected tools std::string _autoDetectText; _autoDetectText = "Autodetected "; _autoDetectText.append(this->m_TrackingDeviceData.Line); //This is the device name as string of the current TrackingDevice. _autoDetectText.append(" Storage"); this->ReplaceCurrentToolStorage(autoDetectedStorage, _autoDetectText); //auto save the new storage to hard disc (for persistence) AutoSaveToolStorage(); //update label QString toolLabel = QString("Loaded Tools: ") + QString::number(m_toolStorage->GetToolCount()) + " Tools (Auto Detected)"; m_Controls->m_ToolLabel->setText(toolLabel); //update tool preview m_Controls->m_TrackingToolsStatusWidget->RemoveStatusLabels(); m_Controls->m_TrackingToolsStatusWidget->PreShowTools(m_toolStorage); EnableTrackingConfigurationButtons(); //print a logging message about the detected tools switch (m_toolStorage->GetToolCount()) { case 0: MITK_INFO("IGT Tracking Toolbox") << "Found no tools. Empty ToolStorage was autosaved to " << m_ToolStorageFilename.toStdString(); break; case 1: MITK_INFO("IGT Tracking Toolbox") << "Found one tool. ToolStorage was autosaved to " << m_ToolStorageFilename.toStdString(); break; default: MITK_INFO("IGT Tracking Toolbox") << "Found " << m_toolStorage->GetToolCount() << " tools. ToolStorage was autosaved to " << m_ToolStorageFilename.toStdString(); } } void QmitkMITKIGTTrackingToolboxView::MessageBox(std::string s) { QMessageBox msgBox; msgBox.setText(s.c_str()); msgBox.exec(); } void QmitkMITKIGTTrackingToolboxView::UpdateRenderTrackingTimer() { //update filter m_ToolVisualizationFilter->Update(); MITK_DEBUG << "Number of outputs ToolVisualizationFilter: " << m_ToolVisualizationFilter->GetNumberOfIndexedOutputs(); MITK_DEBUG << "Number of inputs ToolVisualizationFilter: " << m_ToolVisualizationFilter->GetNumberOfIndexedInputs(); //update tool colors to show tool status for (unsigned int i = 0; i < m_ToolVisualizationFilter->GetNumberOfIndexedOutputs(); i++) { mitk::NavigationData::Pointer currentTool = m_ToolVisualizationFilter->GetOutput(i); if (currentTool->IsDataValid()) { this->m_toolStorage->GetTool(i)->GetDataNode()->SetColor(mitk::IGTColor_VALID); } else { this->m_toolStorage->GetTool(i)->GetDataNode()->SetColor(mitk::IGTColor_WARNING); } } //Update the NeedleProjectionFilter if( m_NeedleProjectionFilter.IsNotNull() ) { m_NeedleProjectionFilter->Update(); } //refresh view and status widget //mitk::RenderingManager::GetInstance()->RequestUpdateAll(); m_Controls->m_TrackingToolsStatusWidget->Refresh(); } void QmitkMITKIGTTrackingToolboxView::UpdateLoggingTrackingTimer() { //update logging if (m_logging) { this->m_loggingFilter->Update(); m_loggedFrames = this->m_loggingFilter->GetNumberOfRecordedSteps(); this->m_Controls->m_LoggedFramesLabel->setText("Logged Frames: " + QString::number(m_loggedFrames)); //check if logging stopped automatically if ((m_loggedFrames > 1) && (!m_loggingFilter->GetRecording())){ StopLogging(); } } //refresh status widget m_Controls->m_TrackingToolsStatusWidget->Refresh(); } void QmitkMITKIGTTrackingToolboxView::OnChooseFileClicked() { QDir currentPath = QFileInfo(m_Controls->m_LoggingFileName->text()).dir(); // if no path was selected (QDir would select current working dir then) or the // selected path does not exist -> use home directory if (currentPath == QDir() || !currentPath.exists()) { currentPath = QDir(QDir::homePath()); } QString filename = QFileDialog::getSaveFileName(nullptr, tr("Choose Logging File"), currentPath.absolutePath(), "*.*"); if (filename == "") return; this->m_Controls->m_LoggingFileName->setText(filename); this->OnToggleFileExtension(); } // bug-16470: toggle file extension after clicking on radio button void QmitkMITKIGTTrackingToolboxView::OnToggleFileExtension() { QString currentInputText = this->m_Controls->m_LoggingFileName->text(); QString currentFile = QFileInfo(currentInputText).baseName(); QDir currentPath = QFileInfo(currentInputText).dir(); if (currentFile.isEmpty()) { currentFile = "logfile"; } // Setting currentPath to default home path when currentPath is empty or it does not exist if (currentPath == QDir() || !currentPath.exists()) { currentPath = QDir::homePath(); } // check if csv radio button is clicked if (this->m_Controls->m_CsvFormat->isChecked()) { // you needn't add a seperator to the input text when currentpath is the rootpath if (currentPath.isRoot()) { this->m_Controls->m_LoggingFileName->setText(QDir::toNativeSeparators(currentPath.absolutePath()) + currentFile + ".csv"); } else { this->m_Controls->m_LoggingFileName->setText(QDir::toNativeSeparators(currentPath.absolutePath()) + QDir::separator() + currentFile + ".csv"); } } // check if xml radio button is clicked else if (this->m_Controls->m_XmlFormat->isChecked()) { // you needn't add a seperator to the input text when currentpath is the rootpath if (currentPath.isRoot()) { this->m_Controls->m_LoggingFileName->setText(QDir::toNativeSeparators(currentPath.absolutePath()) + currentFile + ".xml"); } else { this->m_Controls->m_LoggingFileName->setText(QDir::toNativeSeparators(currentPath.absolutePath()) + QDir::separator() + currentFile + ".xml"); } } } void QmitkMITKIGTTrackingToolboxView::OnToggleAdvancedSimpleMode() { if (m_SimpleModeEnabled) { m_Controls->m_simpleWidget->setVisible(false); m_Controls->m_MainWidget->setVisible(true); m_Controls->m_SimpleUI->setChecked(false); m_SimpleModeEnabled = false; } else { m_Controls->m_simpleWidget->setVisible(true); m_Controls->m_MainWidget->setVisible(false); m_SimpleModeEnabled = true; } } void QmitkMITKIGTTrackingToolboxView::OnToggleDifferentUpdateRates() { if (m_Controls->m_UseDifferentUpdateRates->isChecked()) { if (m_Controls->m_RenderUpdateRate->value() == 0) m_Controls->m_RenderWarningLabel->setVisible(true); else m_Controls->m_RenderWarningLabel->setVisible(false); m_Controls->m_UpdateRate->setEnabled(false); m_Controls->m_OptionsUpdateRateLabel->setEnabled(false); m_Controls->m_RenderUpdateRate->setEnabled(true); m_Controls->m_OptionsRenderUpdateRateLabel->setEnabled(true); m_Controls->m_LogUpdateRate->setEnabled(true); m_Controls->m_OptionsLogUpdateRateLabel->setEnabled(true); } else { m_Controls->m_RenderWarningLabel->setVisible(false); m_Controls->m_UpdateRate->setEnabled(true); m_Controls->m_OptionsUpdateRateLabel->setEnabled(true); m_Controls->m_RenderUpdateRate->setEnabled(false); m_Controls->m_OptionsRenderUpdateRateLabel->setEnabled(false); m_Controls->m_LogUpdateRate->setEnabled(false); m_Controls->m_OptionsLogUpdateRateLabel->setEnabled(false); } } void QmitkMITKIGTTrackingToolboxView::OnChangeRenderUpdateRate() { if (m_Controls->m_RenderUpdateRate->value() == 0) m_Controls->m_RenderWarningLabel->setVisible(true); else m_Controls->m_RenderWarningLabel->setVisible(false); } void QmitkMITKIGTTrackingToolboxView::StartLogging() { if (m_ToolVisualizationFilter.IsNull()) { MessageBox("Cannot activate logging without a connected device. Configure and connect a tracking device first."); return; } if (!m_logging) { //initialize logging filter m_loggingFilter = mitk::NavigationDataRecorder::New(); m_loggingFilter->SetRecordOnlyValidData(m_Controls->m_SkipInvalidData->isChecked()); m_loggingFilter->ConnectTo(m_ToolVisualizationFilter); if (m_Controls->m_LoggingLimit->isChecked()){ m_loggingFilter->SetRecordCountLimit(m_Controls->m_LoggedFramesLimit->value()); } //start filter with try-catch block for exceptions try { m_loggingFilter->StartRecording(); } catch (mitk::IGTException) { std::string errormessage = "Error during start recording. Recorder already started recording?"; QMessageBox::warning(nullptr, "IGTPlayer: Error", errormessage.c_str()); m_loggingFilter->StopRecording(); return; } //update labels / logging variables this->m_Controls->m_LoggingLabel->setText("Logging ON"); this->m_Controls->m_LoggedFramesLabel->setText("Logged Frames: 0"); m_loggedFrames = 0; m_logging = true; DisableLoggingButtons(); } } void QmitkMITKIGTTrackingToolboxView::StopLogging() { if (m_logging) { //stop logging m_loggingFilter->StopRecording(); m_logging = false; //update GUI this->m_Controls->m_LoggingLabel->setText("Logging OFF"); EnableLoggingButtons(); //write the results to a file if (m_Controls->m_CsvFormat->isChecked()) { mitk::IOUtil::Save(m_loggingFilter->GetNavigationDataSet(), this->m_Controls->m_LoggingFileName->text().toStdString()); } else if (m_Controls->m_XmlFormat->isChecked()) { mitk::IOUtil::Save(m_loggingFilter->GetNavigationDataSet(), this->m_Controls->m_LoggingFileName->text().toStdString()); } } } void QmitkMITKIGTTrackingToolboxView::SetFocus() { } void QmitkMITKIGTTrackingToolboxView::OnAddSingleTool() { QString Identifier = "Tool#"; QString Name = "NewTool"; if (m_toolStorage.IsNotNull()) { Identifier += QString::number(m_toolStorage->GetToolCount()); Name += QString::number(m_toolStorage->GetToolCount()); } else { Identifier += "0"; Name += "0"; } m_Controls->m_NavigationToolCreationWidget->Initialize(GetDataStorage(), Identifier.toStdString(), Name.toStdString()); m_Controls->m_NavigationToolCreationWidget->SetTrackingDeviceType(m_Controls->m_ConfigurationWidget->GetTrackingDevice()->GetType(), false); m_Controls->m_TrackingToolsWidget->setCurrentIndex(1); //disable tracking volume during tool editing lastTrackingVolumeState = m_Controls->m_ShowTrackingVolume->isChecked(); if (lastTrackingVolumeState) m_Controls->m_ShowTrackingVolume->click(); GlobalReinit(); } void QmitkMITKIGTTrackingToolboxView::OnAddSingleToolFinished() { m_Controls->m_TrackingToolsWidget->setCurrentIndex(0); if (this->m_toolStorage.IsNull()) { //this shouldn't happen! MITK_WARN << "No ToolStorage available, cannot add tool, aborting!"; return; } m_toolStorage->AddTool(m_Controls->m_NavigationToolCreationWidget->GetCreatedTool()); m_Controls->m_TrackingToolsStatusWidget->PreShowTools(m_toolStorage); m_Controls->m_ToolLabel->setText(""); //displya in tool selector // m_Controls->m_toolselector->addItem(QString::fromStdString(m_Controls->m_NavigationToolCreationWidget->GetCreatedTool()->GetToolName())); //auto save current storage for persistence MITK_INFO << "Auto saving manually added tools for persistence."; AutoSaveToolStorage(); //enable tracking volume again if (lastTrackingVolumeState) m_Controls->m_ShowTrackingVolume->click(); GlobalReinit(); } void QmitkMITKIGTTrackingToolboxView::OnAddSingleToolCanceled() { m_Controls->m_TrackingToolsWidget->setCurrentIndex(0); //enable tracking volume again if (lastTrackingVolumeState) m_Controls->m_ShowTrackingVolume->click(); GlobalReinit(); } void QmitkMITKIGTTrackingToolboxView::GlobalReinit() { // get all nodes that have not set "includeInBoundingBox" to false mitk::NodePredicateNot::Pointer pred = mitk::NodePredicateNot::New(mitk::NodePredicateProperty::New("includeInBoundingBox", mitk::BoolProperty::New(false))); mitk::DataStorage::SetOfObjects::ConstPointer rs = this->GetDataStorage()->GetSubset(pred); // calculate bounding geometry of these nodes auto bounds = this->GetDataStorage()->ComputeBoundingGeometry3D(rs, "visible"); // initialize the views to the bounding geometry mitk::RenderingManager::GetInstance()->InitializeViews(bounds); } void QmitkMITKIGTTrackingToolboxView::DisableLoggingButtons() { m_Controls->m_StartLogging->setEnabled(false); m_Controls->m_LoggingFileName->setEnabled(false); m_Controls->m_ChooseFile->setEnabled(false); m_Controls->m_LoggingLimit->setEnabled(false); m_Controls->m_LoggedFramesLimit->setEnabled(false); m_Controls->m_CsvFormat->setEnabled(false); m_Controls->m_XmlFormat->setEnabled(false); m_Controls->m_SkipInvalidData->setEnabled(false); m_Controls->m_StopLogging->setEnabled(true); } void QmitkMITKIGTTrackingToolboxView::EnableLoggingButtons() { m_Controls->m_StartLogging->setEnabled(true); m_Controls->m_LoggingFileName->setEnabled(true); m_Controls->m_ChooseFile->setEnabled(true); m_Controls->m_LoggingLimit->setEnabled(true); m_Controls->m_LoggedFramesLimit->setEnabled(true); m_Controls->m_CsvFormat->setEnabled(true); m_Controls->m_XmlFormat->setEnabled(true); m_Controls->m_SkipInvalidData->setEnabled(true); m_Controls->m_StopLogging->setEnabled(false); } void QmitkMITKIGTTrackingToolboxView::DisableOptionsButtons() { m_Controls->m_ShowTrackingVolume->setEnabled(false); m_Controls->m_UseDifferentUpdateRates->setEnabled(false); m_Controls->m_UpdateRate->setEnabled(false); m_Controls->m_OptionsUpdateRateLabel->setEnabled(false); m_Controls->m_RenderUpdateRate->setEnabled(false); m_Controls->m_OptionsRenderUpdateRateLabel->setEnabled(false); m_Controls->m_LogUpdateRate->setEnabled(false); m_Controls->m_OptionsLogUpdateRateLabel->setEnabled(false); m_Controls->m_DisableAllTimers->setEnabled(false); m_Controls->m_OtherOptionsGroupBox->setEnabled(false); m_Controls->m_EnableOpenIGTLinkMicroService->setEnabled(false); m_Controls->m_OpenIGTLinkDataFormat->setEnabled(false); } void QmitkMITKIGTTrackingToolboxView::EnableOptionsButtons() { m_Controls->m_ShowTrackingVolume->setEnabled(true); m_Controls->m_UseDifferentUpdateRates->setEnabled(true); m_Controls->m_DisableAllTimers->setEnabled(true); m_Controls->m_OtherOptionsGroupBox->setEnabled(true); m_Controls->m_EnableOpenIGTLinkMicroService->setEnabled(true); m_Controls->m_OpenIGTLinkDataFormat->setEnabled(true); OnToggleDifferentUpdateRates(); } void QmitkMITKIGTTrackingToolboxView::EnableTrackingControls() { m_Controls->m_TrackingControlsFrame->setEnabled(true); } void QmitkMITKIGTTrackingToolboxView::DisableTrackingControls() { m_Controls->m_TrackingControlsFrame->setEnabled(false); } void QmitkMITKIGTTrackingToolboxView::EnableTrackingConfigurationButtons() { m_Controls->m_AutoDetectTools->setEnabled(true); m_Controls->m_AddSingleTool->setEnabled(this->m_Controls->m_ConfigurationWidget->GetTrackingDevice()->AddSingleToolIsAvailable()); m_Controls->m_LoadTools->setEnabled(true); m_Controls->m_ResetTools->setEnabled(true); } void QmitkMITKIGTTrackingToolboxView::DisableTrackingConfigurationButtons() { m_Controls->m_AutoDetectTools->setEnabled(false); m_Controls->m_AddSingleTool->setEnabled(false); m_Controls->m_LoadTools->setEnabled(false); m_Controls->m_ResetTools->setEnabled(false); } void QmitkMITKIGTTrackingToolboxView::ReplaceCurrentToolStorage(mitk::NavigationToolStorage::Pointer newStorage, std::string newStorageName) { //first: get rid of the old one //don't reset if there is no tool storage. BugFix #17793 if (m_toolStorage.IsNotNull()){ m_toolStorage->UnLockStorage(); //only to be sure... m_toolStorage->UnRegisterMicroservice(); m_toolStorage = nullptr; } //now: replace by the new one m_toolStorage = newStorage; m_toolStorage->SetName(newStorageName); m_toolStorage->RegisterAsMicroservice(); } void QmitkMITKIGTTrackingToolboxView::OnTimeOut() { MITK_WARN << "TimeOut. Quitting the thread..."; m_WorkerThread->quit(); //only if we can't quit use terminate. if (!m_WorkerThread->wait(1000)) { MITK_ERROR << "Can't quit the thread. Terminating... Might cause further problems, be careful!"; m_WorkerThread->terminate(); m_WorkerThread->wait(); } m_TimeoutTimer->stop(); } void QmitkMITKIGTTrackingToolboxView::OnToolStorageChanged(const ctkServiceEvent event) { //don't listen to any changes during connection, toolStorage is locked anyway, so this are only changes of e.g. sourceID which are not relevant for the widget. if (!m_connected && (event.getType() == ctkServiceEvent::MODIFIED)) { m_Controls->m_ConfigurationWidget->OnToolStorageChanged(); m_Controls->m_toolselector->clear(); for (size_t i = 0; i < m_toolStorage->GetToolCount(); i++) { m_Controls->m_toolselector->addItem(QString::fromStdString(m_toolStorage->GetTool(i)->GetToolName())); } } } //! [StoreUISettings] void QmitkMITKIGTTrackingToolboxView::StoreUISettings() { // persistence service does not directly work in plugins for now // -> using QSettings QSettings settings; settings.beginGroup(QString::fromStdString(VIEW_ID)); MITK_DEBUG << "Store UI settings"; // set the values of some widgets and attrbutes to the QSettings settings.setValue("ShowTrackingVolume", QVariant(m_Controls->m_ShowTrackingVolume->isChecked())); settings.setValue("toolStorageFilename", QVariant(m_ToolStorageFilename)); settings.setValue("VolumeSelectionBox", QVariant(m_Controls->m_VolumeSelectionBox->currentIndex())); settings.setValue("SimpleModeEnabled", QVariant(m_SimpleModeEnabled)); settings.setValue("OpenIGTLinkDataFormat", QVariant(m_Controls->m_OpenIGTLinkDataFormat->currentIndex())); settings.setValue("EnableOpenIGTLinkMicroService", QVariant(m_Controls->m_EnableOpenIGTLinkMicroService->isChecked())); settings.endGroup(); } //! [StoreUISettings] //! [LoadUISettings] void QmitkMITKIGTTrackingToolboxView::LoadUISettings() { // persistence service does not directly work in plugins for now -> using QSettings QSettings settings; settings.beginGroup(QString::fromStdString(VIEW_ID)); // set some widgets and attributes by the values from the QSettings m_Controls->m_ShowTrackingVolume->setChecked(settings.value("ShowTrackingVolume", false).toBool()); m_Controls->m_EnableOpenIGTLinkMicroService->setChecked(settings.value("EnableOpenIGTLinkMicroService", true).toBool()); m_Controls->m_VolumeSelectionBox->setCurrentIndex(settings.value("VolumeSelectionBox", 0).toInt()); m_Controls->m_OpenIGTLinkDataFormat->setCurrentIndex(settings.value("OpenIGTLinkDataFormat", 0).toInt()); m_ToolStorageFilename = settings.value("toolStorageFilename", QVariant("")).toString(); if (settings.value("SimpleModeEnabled", false).toBool()) { this->OnToggleAdvancedSimpleMode(); } settings.endGroup(); //! [LoadUISettings] //! [LoadToolStorage] // try to deserialize the tool storage from the given tool storage file name if (!m_ToolStorageFilename.isEmpty()) { // try-catch block for exceptions try { mitk::NavigationToolStorageDeserializer::Pointer myDeserializer = mitk::NavigationToolStorageDeserializer::New(GetDataStorage()); m_toolStorage->UnRegisterMicroservice(); m_toolStorage = myDeserializer->Deserialize(m_ToolStorageFilename.toStdString()); m_toolStorage->RegisterAsMicroservice(); //update label UpdateToolStorageLabel(m_ToolStorageFilename); //update tool preview m_Controls->m_TrackingToolsStatusWidget->RemoveStatusLabels(); m_Controls->m_TrackingToolsStatusWidget->PreShowTools(m_toolStorage); } catch (mitk::IGTException e) { MITK_WARN("QmitkMITKIGTTrackingToolBoxView") << "Error during restoring tools. Problems with file (" << m_ToolStorageFilename.toStdString() << "), please check the file? Error message: "<OnResetTools(); //if there where errors reset the tool storage to avoid problems later on } } //! [LoadToolStorage] } void QmitkMITKIGTTrackingToolboxView::UpdateToolStorageLabel(QString pathOfLoadedStorage) { QFileInfo myPath(pathOfLoadedStorage); //use this to seperate filename from path QString toolLabel = myPath.fileName(); if (toolLabel.size() > 45) //if the tool storage name is to long trimm the string { toolLabel.resize(40); toolLabel += "[...]"; } m_Controls->m_ToolLabel->setText(toolLabel); } void QmitkMITKIGTTrackingToolboxView::AutoSaveToolStorage() { m_ToolStorageFilename = m_AutoSaveFilename; mitk::NavigationToolStorageSerializer::Pointer mySerializer = mitk::NavigationToolStorageSerializer::New(); mySerializer->Serialize(m_ToolStorageFilename.toStdString(), m_toolStorage); } diff --git a/Plugins/org.mitk.gui.qt.igttracking/src/internal/QmitkMITKIGTTrackingToolboxViewControls.ui b/Plugins/org.mitk.gui.qt.igttracking/src/internal/QmitkMITKIGTTrackingToolboxViewControls.ui index 8e043ac2f8..4c4ff80a50 100644 --- a/Plugins/org.mitk.gui.qt.igttracking/src/internal/QmitkMITKIGTTrackingToolboxViewControls.ui +++ b/Plugins/org.mitk.gui.qt.igttracking/src/internal/QmitkMITKIGTTrackingToolboxViewControls.ui @@ -1,954 +1,954 @@ QmitkMITKIGTTrackingToolboxViewControls 0 0 370 739 0 0 QmitkTemplate 0 Tracking QFrame::NoFrame QFrame::Raised 0 0 QFrame::NoFrame QFrame::Raised 10 75 true true Tracking Tools Qt::AlignLeading|Qt::AlignLeft|Qt::AlignTop 0 0 ToolStorage: <none> Qt::Horizontal 40 20 0 0 Qt::Horizontal 13 49 120 0 Auto Detection 120 0 Add Single Tool 120 0 Load Tool Storage 120 0 Reset QFrame::NoFrame QFrame::Raised 10 75 true Tracking Control Qt::AlignLeading|Qt::AlignLeft|Qt::AlignTop Status: disconnected Qt::Horizontal 40 20 142 0 Connect Qt::Horizontal 40 20 142 0 Start Tracking Qt::Horizontal 40 20 <html><head/><body><p><span style=" color:#ff0000;">Tracking Frozen!</span></p></body></html> true 142 0 Freeze Tracking Qt::Vertical 20 40 Options Update Rate Options Update Rate [per second] Qt::Horizontal 40 20 100 - 30 + 10 Use different Render and Log Update Rates false Render Update Rate [fps] Qt::Horizontal 40 20 false 0 100 30 false Log Update Rate [per second] Qt::Horizontal 40 20 false 1 120 10 60 Other Options Show Tool Quaternions Simple UI Caution, only for backward compatibility: Inverse mode (Quaternions are stored inverse) Tracking Volume Options true Show Tracking Volume false Select Model: Tool Visualization Options true Show Tool Projection false Show Tool Axis Open IGT Link Enable Open IGT Link MicroService true Select Open IGT Link Data Format: TRANSFORM QTDATA TDATA POSITION Disable All Timers true <html><head/><body><p align="right"><span style=" color:#ff0000;">Rendering Disabled!</span></p></body></html> Qt::AutoText Qt::Vertical 20 40 Logging Filename: Choose File Limit Number Of Logged Frames: Qt::Horizontal 40 20 1 9999 300 CSV format true XML format Skip invalid data Logging Status Logging OFF Logged Frames: 0 Qt::Horizontal 40 20 Start Logging Stop Logging Qt::Vertical 20 40 9 742 303 70 70 50 Connect 70 50 Start Tracking Qt::Horizontal 40 20 70 50 Advanced Mode QmitkToolTrackingStatusWidget QWidget
QmitkToolTrackingStatusWidget.h
1 QmitkTrackingDeviceConfigurationWidget QWidget
QmitkTrackingDeviceConfigurationWidget.h
1 QmitkNavigationToolCreationWidget QWidget
QmitkNavigationToolCreationWidget.h
1