diff --git a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing.dox b/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing.dox index 6715cf2f7d..810053213a 100644 --- a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing.dox +++ b/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing.dox @@ -1,71 +1,19 @@ /** \page org_mitk_gui_qt_remeshing The Remeshing Plugin \imageMacro{QmitkRemeshing_Icon.png,"Icon of the Remeshing Plugin.",2.00} \tableofcontents \section org_mitk_gui_qt_remeshingOverview Overview The Remeshing View allows you to remesh surfaces. If done right, remeshing can dramatically increase the quality of your surface mesh. -However, you might lose precision if you reduce your surface mesh too strong. -Even when you keep the detail of your mesh there might be a tiny distance between your original surface and the remeshed surface. +However, you might lose precision if you reduce the vertex density of your surface mesh too strong. +Even when you preserve the detail of your mesh, there might be a tiny distance between your original surface and the remeshed surface. Hence, be careful when using remeshed surfaces for evaluation purposes and always keep the original versions. \section org_mitk_gui_qt_remeshingUsage Usage -\imageMacro{QmitkRemeshing_RemeshingView.png,"Basic and advanced mode of the Remeshing View.",13.29} - -There are two basic and about a handful of advanced settings that influence remeshing. -Most of the time you should be able to gain satisfying results by adjusting only the two basic settings or even without changing any of the default parameters. -In the following the effects of all settings are described in more detail. Image examples are based on the following surface: - -\imageMacro{QmitkRemeshing_OriginalMesh.png,"The surface from which all examples below originate from.",10.08} - -\subsection org_mitk_gui_qt_remeshingBasicSettings Basic Settings - -The Vertices setting is the number of vertices the remeshed surface will consist of. -This is exact as long as Boundary fixing is turned off (default). -The maximum number of vertices is limited to the number of vertices of the input surface, however, you can increase this limit by adjusting the Max. # of vertices setting. - -The Gradation setting controls the distribution of vertices in the remeshed surface. -If set to zero the vertices are distributed equally all over the remeshed surface. -You can push more vertices towards surface regions with high curvature, i.e., more detailed regions, by increasing this setting. - -\imageMacro{QmitkRemeshing_Gradation10Percent.png,"Vertex count reduced to 10 percent\, gradation 0 vs. 1.",16.00} - -\subsection org_mitk_gui_qt_remeshingAdvancedSettings Advanced Settings - -You can arbirarily increase the maximum adjustable number of vertices by changing the Max. # of vertices setting. - -Edge splitting is disabled by default and might take a long time during remeshing when enabled. -This setting represents a number by which the average edge length of the input surface is multiplied to serve as a threshold which regulates edge splitting. -Long edges are split recursively until all edges satisfy the threshold. -Edge splitting is useful for surfaces that contain thin and long polygons. - -\imageMacro{QmitkRemeshing_cylinder.png,"A surface that contains extremely long polygons.",16.00} - -
- -\imageMacro{QmitkRemeshing_CylinderBad.png,"A remeshing attempt without edge splitting.",16.00} - -
- -\imageMacro{QmitkRemeshing_CylinderGood.png,"Increased max. # of vertices\, enabled edge splitting\, followed by a second remeshing run without edge splitting.",16.00} - -The Subsampling setting has direct impact on the quality of the remeshed surface. -The input surface is recursively subdivided until the total number of vertices exceeds its initial vertex count times this setting. - -\imageMacro{QmitkRemeshing_Subsampling20percent.png,"Vertex count reduced to 20 percent\, subsampling 10 vs. 500.",16.00} - -You usually leave the Optimization level set to its default value 1. -When disabled, the remeshed surface has usually a slightly smaller volume than the original surface. -The optimization process minimizes the distance between the two surfaces but values higher than 1 introduce degenerated triangles to the remeshed surface. - -If your surface is open, i.e., it has holes in it, boundaries tend to shrink irregularly during remeshing. -If the position and smoothness of your surface boundaries are important, you should activate the Boundary fixing setting. -This results in additional vertices that make up extra polygons at the remeshed boundaries to keep the original boundaries. - -\imageMacro{QmitkRemeshing_NoBoundaryFixing10Percent.png,"Vertex count reduced to 10 percent\, no boundary fixing.",10.08} +The Remeshing View provides details on its parameters in its user interface. When in doubt, start with the default parameters and iterate to your desired result by reducing the density parameter. */ diff --git a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_CylinderBad.png b/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_CylinderBad.png deleted file mode 100644 index b50eab3701..0000000000 Binary files a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_CylinderBad.png and /dev/null differ diff --git a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_CylinderGood.png b/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_CylinderGood.png deleted file mode 100644 index f9e6e9e1d0..0000000000 Binary files a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_CylinderGood.png and /dev/null differ diff --git a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_Gradation10Percent.png b/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_Gradation10Percent.png deleted file mode 100644 index 878a421d85..0000000000 Binary files a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_Gradation10Percent.png and /dev/null differ diff --git a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_NoBoundaryFixing10Percent.png b/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_NoBoundaryFixing10Percent.png deleted file mode 100644 index 937b7d2957..0000000000 Binary files a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_NoBoundaryFixing10Percent.png and /dev/null differ diff --git a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_OriginalMesh.png b/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_OriginalMesh.png deleted file mode 100644 index 473a7bd4a5..0000000000 Binary files a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_OriginalMesh.png and /dev/null differ diff --git a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_RemeshingView.png b/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_RemeshingView.png deleted file mode 100644 index 94fb6094ee..0000000000 Binary files a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_RemeshingView.png and /dev/null differ diff --git a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_Subsampling20percent.png b/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_Subsampling20percent.png deleted file mode 100644 index 06f3878191..0000000000 Binary files a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_Subsampling20percent.png and /dev/null differ diff --git a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_cylinder.png b/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_cylinder.png deleted file mode 100644 index e24f55aa46..0000000000 Binary files a/Plugins/org.mitk.gui.qt.remeshing/documentation/UserManual/QmitkRemeshing_cylinder.png and /dev/null differ diff --git a/Plugins/org.mitk.gui.qt.remeshing/src/internal/QmitkRemeshingView.cpp b/Plugins/org.mitk.gui.qt.remeshing/src/internal/QmitkRemeshingView.cpp index aa43ed2f17..697ddbc62a 100644 --- a/Plugins/org.mitk.gui.qt.remeshing/src/internal/QmitkRemeshingView.cpp +++ b/Plugins/org.mitk.gui.qt.remeshing/src/internal/QmitkRemeshingView.cpp @@ -1,254 +1,156 @@ /*=================================================================== The Medical Imaging Interaction Toolkit (MITK) Copyright (c) German Cancer Research Center, Division of Medical and Biological Informatics. All rights reserved. This software is distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See LICENSE.txt or http://www.mitk.org for details. ===================================================================*/ #include "QmitkRemeshingView.h" -// MITK #include #include #include #include #include #include #include -// Qt -#include - -// VTK #include #include -// C++ Standard Library -#include -#include - QmitkRemeshingView::QmitkRemeshingView() { } QmitkRemeshingView::~QmitkRemeshingView() { } void QmitkRemeshingView::CreateQtPartControl(QWidget* parent) { m_Controls.setupUi(parent); m_Controls.surfaceComboBox->SetDataStorage(this->GetDataStorage()); m_Controls.surfaceComboBox->SetPredicate(mitk::NodePredicateAnd::New( mitk::TNodePredicateDataType::New(), mitk::NodePredicateNot::New(mitk::NodePredicateProperty::New("helper object")))); - QIntValidator* posIntValidator = new QIntValidator(0, std::numeric_limits::max(), parent); - m_Controls.maxNumVerticesLineEdit->setValidator(posIntValidator); - - this->EnableWidgets(m_Controls.surfaceComboBox->GetSelectedNode().IsNotNull()); - this->OnAdvancedSettingsButtonToggled(false); - connect(m_Controls.surfaceComboBox, SIGNAL(OnSelectionChanged(const mitk::DataNode *)), this, SLOT(OnSelectedSurfaceChanged(const mitk::DataNode *))); - connect(m_Controls.numVerticesSlider, SIGNAL(valueChanged(int)), this, SLOT(OnNumberOfVerticesChanged(int))); - connect(m_Controls.numVerticesSpinBox, SIGNAL(valueChanged(int)), this, SLOT(OnNumberOfVerticesChanged(int))); - connect(m_Controls.gradationSlider, SIGNAL(valueChanged(double)), this, SLOT(OnGradationChanged(double))); - connect(m_Controls.gradationSpinBox, SIGNAL(valueChanged(double)), this, SLOT(OnGradationChanged(double))); - connect(m_Controls.advancedSettingsButton, SIGNAL(toggled(bool)), this, SLOT(OnAdvancedSettingsButtonToggled(bool))); - connect(m_Controls.maxNumVerticesLineEdit, SIGNAL(editingFinished()), this, SLOT(OnMaxNumVerticesLineEditEditingFinished())); - connect(m_Controls.edgeSplittingSlider, SIGNAL(valueChanged(double)), this, SLOT(OnEdgeSplittingChanged(double))); - connect(m_Controls.edgeSplittingSpinBox, SIGNAL(valueChanged(double)), this, SLOT(OnEdgeSplittingChanged(double))); - connect(m_Controls.subsamplingSlider, SIGNAL(valueChanged(int)), this, SLOT(OnSubsamplingChanged(int))); - connect(m_Controls.subsamplingSpinBox, SIGNAL(valueChanged(int)), this, SLOT(OnSubsamplingChanged(int))); - connect(m_Controls.optimizationLevelSlider, SIGNAL(valueChanged(int)), this, SLOT(OnOptimizationLevelChanged(int))); - connect(m_Controls.optimizationLevelSpinBox, SIGNAL(valueChanged(int)), this, SLOT(OnOptimizationLevelChanged(int))); + connect(m_Controls.densitySlider, SIGNAL(valueChanged(int)), this, SLOT(OnDensityChanged(int))); + connect(m_Controls.densitySpinBox, SIGNAL(valueChanged(int)), this, SLOT(OnDensityChanged(int))); connect(m_Controls.remeshPushButton, SIGNAL(clicked()), this, SLOT(OnRemeshButtonClicked())); this->OnSelectedSurfaceChanged(m_Controls.surfaceComboBox->GetSelectedNode()); } -void QmitkRemeshingView::EnableWidgets(bool enable) -{ - m_Controls.surfaceComboBox->setEnabled(enable); - m_Controls.numVerticesSlider->setEnabled(enable); - m_Controls.numVerticesSpinBox->setEnabled(enable); - m_Controls.gradationSlider->setEnabled(enable); - m_Controls.gradationSpinBox->setEnabled(enable); - m_Controls.maxNumVerticesLineEdit->setEnabled(enable); - m_Controls.edgeSplittingSlider->setEnabled(enable); - m_Controls.edgeSplittingSpinBox->setEnabled(enable); - m_Controls.subsamplingSlider->setEnabled(enable); - m_Controls.subsamplingSpinBox->setEnabled(enable); - m_Controls.optimizationLevelSlider->setEnabled(enable); - m_Controls.optimizationLevelSpinBox->setEnabled(enable); - m_Controls.forceManifoldCheckBox->setEnabled(enable); - m_Controls.boundaryFixingCheckBox->setEnabled(enable); - m_Controls.remeshPushButton->setEnabled(enable); -} - -void QmitkRemeshingView::OnAdvancedSettingsButtonToggled(bool toggled) -{ - m_Controls.maxNumVerticesLabel->setVisible(toggled); - m_Controls.maxNumVerticesLineEdit->setVisible(toggled); - m_Controls.edgeSplittingLabel->setVisible(toggled); - m_Controls.edgeSplittingSlider->setVisible(toggled); - m_Controls.edgeSplittingSpinBox->setVisible(toggled); - m_Controls.subsamplingLabel->setVisible(toggled); - m_Controls.subsamplingSlider->setVisible(toggled); - m_Controls.subsamplingSpinBox->setVisible(toggled); - m_Controls.optimizationLevelLabel->setVisible(toggled); - m_Controls.optimizationLevelSlider->setVisible(toggled); - m_Controls.optimizationLevelSpinBox->setVisible(toggled); - m_Controls.forceManifoldCheckBox->setVisible(toggled); - m_Controls.boundaryFixingCheckBox->setVisible(toggled); -} - -void QmitkRemeshingView::OnEdgeSplittingChanged(double edgeSplitting) -{ - if (edgeSplitting != m_Controls.edgeSplittingSlider->value()) - m_Controls.edgeSplittingSlider->setValue(edgeSplitting); - - if (edgeSplitting != m_Controls.edgeSplittingSpinBox->value()) - m_Controls.edgeSplittingSpinBox->setValue(edgeSplitting); -} - -void QmitkRemeshingView::OnGradationChanged(double gradation) -{ - if (gradation != m_Controls.gradationSlider->value()) - m_Controls.gradationSlider->setValue(gradation); - - if (gradation != m_Controls.gradationSpinBox->value()) - m_Controls.gradationSpinBox->setValue(gradation); -} - -void QmitkRemeshingView::OnMaxNumVerticesLineEditEditingFinished() +void QmitkRemeshingView::OnSelectedSurfaceChanged(const mitk::DataNode *node) { - int maximum = m_Controls.maxNumVerticesLineEdit->text().toInt(); - - if (m_Controls.numVerticesSpinBox->maximum() != maximum) + if (node != nullptr) { - m_Controls.numVerticesSlider->setMaximum(maximum); - m_Controls.numVerticesSpinBox->setMaximum(maximum); + m_MaxNumberOfVertices = static_cast(static_cast(node->GetData())->GetVtkPolyData()->GetNumberOfPoints()); + this->EnableWidgets(true); + } + else + { + m_MaxNumberOfVertices = 0; + this->EnableWidgets(false); } } -void QmitkRemeshingView::OnNumberOfVerticesChanged(int numVertices) -{ - if (numVertices != m_Controls.numVerticesSlider->value()) - m_Controls.numVerticesSlider->setValue(numVertices); - - if (numVertices != m_Controls.numVerticesSpinBox->value()) - m_Controls.numVerticesSpinBox->setValue(numVertices); -} - -void QmitkRemeshingView::OnOptimizationLevelChanged(int optimizationLevel) +void QmitkRemeshingView::OnDensityChanged(int density) { - if (optimizationLevel != m_Controls.optimizationLevelSlider->value()) - m_Controls.optimizationLevelSlider->setValue(optimizationLevel); + if (density != m_Controls.densitySlider->value()) + m_Controls.densitySlider->setValue(density); - if (optimizationLevel != m_Controls.optimizationLevelSpinBox->value()) - m_Controls.optimizationLevelSpinBox->setValue(optimizationLevel); + if (density != m_Controls.densitySpinBox->value()) + m_Controls.densitySpinBox->setValue(density); } void QmitkRemeshingView::OnRemeshButtonClicked() { mitk::DataNode::Pointer selectedNode = m_Controls.surfaceComboBox->GetSelectedNode(); mitk::Surface::ConstPointer surface = static_cast(selectedNode->GetData()); - int numVertices = m_Controls.numVerticesSpinBox->value(); - double gradation = m_Controls.gradationSpinBox->value(); - int subsampling = m_Controls.subsamplingSpinBox->value(); - double edgeSplitting = m_Controls.edgeSplittingSpinBox->value(); - int optimizationLevel = m_Controls.optimizationLevelSpinBox->value(); - bool forceManifold = m_Controls.forceManifoldCheckBox->isChecked(); - bool boundaryFixing = m_Controls.boundaryFixingCheckBox->isChecked(); - // mitk::Surface::Pointer remeshedSurface = mitk::ACVD::Remesh(surface, 0, numVertices, gradation, subsampling, edgeSplitting, optimizationLevel, forceManifold, boundaryFixing); + int density = m_Controls.densitySpinBox->value(); + int numVertices = std::max(100, static_cast(m_MaxNumberOfVertices * (density * 0.01))); + + double gradation = m_Controls.remeshingComboBox->currentText() == QStringLiteral("Adaptive") + ? 1.0 + : 0.0; + + const QString quality = m_Controls.qualityComboBox->currentText(); + int subsampling; + + if (QStringLiteral("High (slow)") == quality) + { + subsampling = 50; + } + else if (QStringLiteral("Maximum (very slow)") == quality) + { + subsampling = 500; + } + else // The default is "Medium (fast)". + { + subsampling = 10; + } + + bool boundaryFixing = m_Controls.preserveEdgesCheckBox->isChecked(); mitk::ACVD::RemeshFilter::Pointer remesher = mitk::ACVD::RemeshFilter::New(); remesher->SetInput(surface); remesher->SetTimeStep(0); remesher->SetNumVertices(numVertices); remesher->SetGradation(gradation); remesher->SetSubsampling(subsampling); - remesher->SetEdgeSplitting(edgeSplitting); - remesher->SetOptimizationLevel(optimizationLevel); - remesher->SetForceManifold(forceManifold); + remesher->SetEdgeSplitting(0.0); + remesher->SetOptimizationLevel(1.0); + remesher->SetForceManifold(false); remesher->SetBoundaryFixing(boundaryFixing); try { remesher->Update(); } catch(const mitk::Exception& exception) { MITK_ERROR << exception.GetDescription(); return; } mitk::Surface::Pointer remeshedSurface = remesher->GetOutput(); mitk::DataNode::Pointer newNode = mitk::DataNode::New(); - newNode->SetName(QString("%1 (%2, %3)").arg(selectedNode->GetName().c_str()).arg(remeshedSurface->GetVtkPolyData()->GetNumberOfPoints()).arg(gradation).toStdString()); + newNode->SetName(QString("%1 (%2%)").arg(selectedNode->GetName().c_str()).arg(density).toStdString()); newNode->SetProperty("material.representation", mitk::VtkRepresentationProperty::New(VTK_WIREFRAME)); newNode->SetData(remeshedSurface); this->GetDataStorage()->Add(newNode, selectedNode); } -void QmitkRemeshingView::OnSelectedSurfaceChanged(const mitk::DataNode *node) -{ - if (node != nullptr) - { - int numVertices = static_cast(static_cast(node->GetData())->GetVtkPolyData()->GetNumberOfPoints()); - int minimum = numVertices < 100 ? numVertices : 100; - int maximum = numVertices == minimum ? numVertices * 10 : numVertices; - int step = std::max(1, maximum / 10); - - this->SetNumberOfVertices(minimum, maximum, step, numVertices); - this->EnableWidgets(true); - } - else - { - this->EnableWidgets(false); - this->SetNumberOfVertices(0, 0, 0, 0); - } -} - -void QmitkRemeshingView::OnSubsamplingChanged(int subsampling) +void QmitkRemeshingView::EnableWidgets(bool enable) { - if (subsampling != m_Controls.subsamplingSlider->value()) - m_Controls.subsamplingSlider->setValue(subsampling); + m_Controls.surfaceComboBox->setEnabled(enable); + m_Controls.densitySlider->setEnabled(enable); + m_Controls.densitySpinBox->setEnabled(enable); + m_Controls.remeshingComboBox->setEnabled(enable); + m_Controls.qualityComboBox->setEnabled(enable); + m_Controls.preserveEdgesCheckBox->setEnabled(enable); + m_Controls.remeshPushButton->setEnabled(enable); - if (subsampling != m_Controls.subsamplingSpinBox->value()) - m_Controls.subsamplingSpinBox->setValue(subsampling); + m_Controls.explanationLabel->setVisible(enable); } void QmitkRemeshingView::SetFocus() { m_Controls.surfaceComboBox->setFocus(); } -void QmitkRemeshingView::SetNumberOfVertices(int minimum, int maximum, int step, int value) -{ - m_Controls.numVerticesSlider->setMinimum(minimum); - m_Controls.numVerticesSlider->setMaximum(maximum); - m_Controls.numVerticesSlider->setSingleStep(1); - m_Controls.numVerticesSlider->setPageStep(step); - - m_Controls.numVerticesSpinBox->setMinimum(minimum); - m_Controls.numVerticesSpinBox->setMaximum(maximum); - m_Controls.numVerticesSpinBox->setSingleStep(step); - m_Controls.numVerticesSpinBox->setValue(value); - - m_Controls.maxNumVerticesLineEdit->setText(QString("%1").arg(maximum)); -} diff --git a/Plugins/org.mitk.gui.qt.remeshing/src/internal/QmitkRemeshingView.h b/Plugins/org.mitk.gui.qt.remeshing/src/internal/QmitkRemeshingView.h index ab5fc54a47..59979f8458 100644 --- a/Plugins/org.mitk.gui.qt.remeshing/src/internal/QmitkRemeshingView.h +++ b/Plugins/org.mitk.gui.qt.remeshing/src/internal/QmitkRemeshingView.h @@ -1,54 +1,46 @@ /*=================================================================== The Medical Imaging Interaction Toolkit (MITK) Copyright (c) German Cancer Research Center, Division of Medical and Biological Informatics. All rights reserved. This software is distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See LICENSE.txt or http://www.mitk.org for details. ===================================================================*/ #ifndef QmitkRemeshingView_h #define QmitkRemeshingView_h #include -#include #include class QmitkRemeshingView : public QmitkAbstractView { Q_OBJECT public: QmitkRemeshingView(); ~QmitkRemeshingView(); void CreateQtPartControl(QWidget* parent) override; void SetFocus() override; private slots: - void OnAdvancedSettingsButtonToggled(bool toggled); - void OnEdgeSplittingChanged(double edgeSplitting); - void OnGradationChanged(double gradation); - void OnMaxNumVerticesLineEditEditingFinished(); - void OnNumberOfVerticesChanged(int numVertices); - void OnOptimizationLevelChanged(int optimizationLevel); - void OnRemeshButtonClicked(); void OnSelectedSurfaceChanged(const mitk::DataNode *node); - void OnSubsamplingChanged(int subsampling); + void OnDensityChanged(int numVertices); + void OnRemeshButtonClicked(); private: void EnableWidgets(bool enable); - void SetNumberOfVertices(int minimum, int maximum, int step, int value); Ui::QmitkRemeshingViewControls m_Controls; - QThread m_Thread; + int m_MaxNumberOfVertices; }; #endif diff --git a/Plugins/org.mitk.gui.qt.remeshing/src/internal/QmitkRemeshingViewControls.ui b/Plugins/org.mitk.gui.qt.remeshing/src/internal/QmitkRemeshingViewControls.ui index ce63997fb1..0fbd4a62dc 100644 --- a/Plugins/org.mitk.gui.qt.remeshing/src/internal/QmitkRemeshingViewControls.ui +++ b/Plugins/org.mitk.gui.qt.remeshing/src/internal/QmitkRemeshingViewControls.ui @@ -1,440 +1,247 @@ QmitkRemeshingViewControls true 0 0 - 260 - 423 + 253 + 573 Remeshing - - - - - - 0 - 0 - - - - Surface - - - - - - - true - - - - 0 - 0 - - - - - - - - - 0 - 0 - - - - Vertices - - - - - - - - 0 - 0 - - - - 10000 - - - 100 - - + + + + 0 - - Qt::Horizontal - + + + Medium (fast) + + + + + High (slow) + + + + + Maximum (very slow) + + - + + + % + - 0 + 1 - 10000 + 100 - 100 + 1 - 0 + 100 - - + + - + 0 0 - Gradation - - - - - - - 1.000000000000000 - - - 0.100000000000000 - - - 1.000000000000000 - - - 10.000000000000000 - - - Qt::Horizontal - - - - - - - 1 - - - 10.000000000000000 + Preserve Edges - - 0.100000000000000 - - - 1.000000000000000 + + true - - - - - - - 0 - 0 - - - - - 0 - 32 - - - - Advanced settings - - - Qt::ToolButtonTextBesideIcon - - - Qt::Vertical - - - true - - - - - - + 0 0 - Max. # of vertices + Surface - - - 0 - - - 10 - - - - - - - - 0 - 0 - - - - Subsampling + + + true - - - - 0 0 - - 500 - - - 10 - - - 50 - - - 50 - - - Qt::Horizontal - - - - - - - 0 - - - 500 - - - 10 - - - 50 - - - + + - + 0 0 - Force manifold - - - false + Density - - + + 0 0 - - Boundary fixing - - - false - - - - - - - 10 - - + 1 - - - - - - Optimization Level - - - - - - 10 + 100 - 1 + 10 - 1 + 100 Qt::Horizontal - - + + 0 0 - Edge splitting + Remeshing - - - - 0.000000000000000 - - - 0.010000000000000 - - - 1.000000000000000 - - - 10.000000000000000 - - - Qt::Horizontal - + + + + + Adaptive + + + + + Regular + + - - - - 2 - - - 10.000000000000000 - - - 0.100000000000000 + + + + + 0 + 0 + - - 0.000000000000000 + + Quality true Remesh :/Remeshing/RemeshingIcon.png:/Remeshing/RemeshingIcon.png 24 24 + + + + <html><head/><body><p><span style=" font-weight:600;">Density:</span> The density of the resulting surface compared to the input surface. For example, a density of 50% will effectively halve the number of vertices. It's not uncommen to choose values as low as 10% for overly dense input surfaces. The minimum number of output vertices is at least 100, though.</p><p><span style=" font-weight:600;">Remeshing:</span> Adaptive remeshing results in higher density in curvy areas and less density in flat areas. This remeshing strategy can preserve fine shape details even when the overall density is heavily reduced. Regular remeshing evenly distributes the density regardless of the local shape of the surface.</p><p><span style=" font-weight:600;">Quality</span>: While medium quality is sufficient for the vast majority of use cases, you can increase this setting to further optimize the mesh quality in terms of uniformly shaped triangles. However, computation time and memory consumption increase dramatically compared to very small improvements.</p><p><span style=" font-weight:600;">Preserve Edges:</span> If the input surface contains holes or edges, they will be preserved very accurately by default at the cost of less uniform triangles at their direct neighborhood.</p></body></html> + + + true + + + Qt::Vertical 20 40 - - ctkDoubleSlider - QWidget -
ctkDoubleSlider.h
- - - ctkExpandButton - QToolButton -
ctkExpandButton.h
- QmitkDataStorageComboBox QComboBox
QmitkDataStorageComboBox.h
 surfaceComboBox - numVerticesSpinBox - gradationSpinBox - advancedSettingsButton - maxNumVerticesLineEdit - edgeSplittingSpinBox - subsamplingSpinBox - optimizationLevelSpinBox - forceManifoldCheckBox - boundaryFixingCheckBox + densitySpinBox + preserveEdgesCheckBox remeshPushButton