diff --git a/CMake/Whitelists/ClassificationCmdApps.cmake b/CMake/Whitelists/ClassificationCmdApps.cmake index a8b1d36b67..19011af613 100644 --- a/CMake/Whitelists/ClassificationCmdApps.cmake +++ b/CMake/Whitelists/ClassificationCmdApps.cmake @@ -1,22 +1,20 @@ include(${CMAKE_CURRENT_LIST_DIR}/CoreCmdApps.cmake) list(APPEND enabled_modules Classification CLCore CLVigraRandomForest CLUtilities CLMRUtilities CLImportanceWeighting Segmentation DataCollection - IpSegmentation - IpFunc SurfaceInterpolation GraphAlgorithms ImageStatistics ImageExtraction PlanarFigure QtWidgets QtWidgetsExt ) diff --git a/CMake/Whitelists/FlowBenchSegmentation.cmake b/CMake/Whitelists/FlowBenchSegmentation.cmake index 1f2ac2ac73..da16f6fad7 100644 --- a/CMake/Whitelists/FlowBenchSegmentation.cmake +++ b/CMake/Whitelists/FlowBenchSegmentation.cmake @@ -1,57 +1,55 @@ set(enabled_modules Core CppMicroServices DICOM DICOMPM DataTypesExt AlgorithmsExt DICOMQI Multilabel SceneSerializationBase DICOMPMIO DICOMImageIO ContourModel DICOMSegIO LegacyGL MapperExt SceneSerialization LegacyIO IOExt MultilabelIO AppUtil QtWidgets QtWidgetsExt Segmentation SegmentationUI PlanarFigure Annotation - IpSegmentation - IpFunc SurfaceInterpolation GraphAlgorithms ImageExtraction ImageStatistics ) set(enabled_plugins org.blueberry.core.commands org.blueberry.core.expressions org.blueberry.core.runtime org.blueberry.ui.qt org.blueberry.ui.qt.help org.blueberry.ui.qt.log org.mitk.core.ext org.mitk.core.services org.mitk.gui.common org.mitk.gui.qt.application org.mitk.gui.qt.common org.mitk.gui.qt.datamanager org.mitk.gui.qt.flow.segmentation org.mitk.gui.qt.flowapplication org.mitk.gui.qt.imagenavigator org.mitk.gui.qt.multilabelsegmentation org.mitk.gui.qt.properties org.mitk.gui.qt.segmentation org.mitk.gui.qt.stdmultiwidgeteditor org.mitk.planarfigure ) diff --git a/CMakeLists.txt b/CMakeLists.txt index 74ac3443a8..a9bbe37243 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -1,1439 +1,1437 @@ set(MITK_CMAKE_MINIMUM_REQUIRED_VERSION 3.18) cmake_minimum_required(VERSION ${MITK_CMAKE_MINIMUM_REQUIRED_VERSION}) if(CMAKE_VERSION VERSION_GREATER_EQUAL 3.19 AND CMAKE_VERSION VERSION_LESS 3.19.2) message(FATAL_ERROR "\ CMake v${CMAKE_VERSION} is defective [1]. \ Please either downgrade to v3.18 or upgrade to at least v3.19.2.\n\ [1] https://gitlab.kitware.com/cmake/cmake/-/issues/21529") endif() #----------------------------------------------------------------------------- # Policies #----------------------------------------------------------------------------- #[[ T28060 https://cmake.org/cmake/help/v3.18/policy/CMP0091.html https://cmake.org/cmake/help/v3.18/variable/CMAKE_MSVC_RUNTIME_LIBRARY.html We pass CMP0091 to all external projects as command-line argument: -DCMAKE_POLICY_DEFAULT_CMP0091:STRING=OLD ]] cmake_policy(SET CMP0091 OLD) #----------------------------------------------------------------------------- # Superbuild Option - Enabled by default #----------------------------------------------------------------------------- option(MITK_USE_SUPERBUILD "Build MITK and the projects it depends on via SuperBuild.cmake." ON) if(MITK_USE_SUPERBUILD) project(MITK-superbuild) set(MITK_SOURCE_DIR ${PROJECT_SOURCE_DIR}) set(MITK_BINARY_DIR ${PROJECT_BINARY_DIR}) else() project(MITK VERSION 2021.02.99) include_directories(SYSTEM ${MITK_SUPERBUILD_BINARY_DIR}) endif() #----------------------------------------------------------------------------- # MITK Extension Feature #----------------------------------------------------------------------------- set(MITK_EXTENSION_DIRS "" CACHE STRING "") unset(MITK_ABSOLUTE_EXTENSION_DIRS) foreach(MITK_EXTENSION_DIR ${MITK_EXTENSION_DIRS}) get_filename_component(MITK_ABSOLUTE_EXTENSION_DIR "${MITK_EXTENSION_DIR}" ABSOLUTE) list(APPEND MITK_ABSOLUTE_EXTENSION_DIRS "${MITK_ABSOLUTE_EXTENSION_DIR}") endforeach() set(MITK_DIR_PLUS_EXTENSION_DIRS "${MITK_SOURCE_DIR}" ${MITK_ABSOLUTE_EXTENSION_DIRS}) #----------------------------------------------------------------------------- # Update CMake module path #----------------------------------------------------------------------------- set(MITK_CMAKE_DIR ${MITK_SOURCE_DIR}/CMake) set(CMAKE_MODULE_PATH ${MITK_CMAKE_DIR}) foreach(MITK_EXTENSION_DIR ${MITK_ABSOLUTE_EXTENSION_DIRS}) set(MITK_CMAKE_EXTENSION_DIR "${MITK_EXTENSION_DIR}/CMake") if(EXISTS "${MITK_CMAKE_EXTENSION_DIR}") list(APPEND CMAKE_MODULE_PATH "${MITK_CMAKE_EXTENSION_DIR}") endif() endforeach() #----------------------------------------------------------------------------- # CMake function(s) and macro(s) #----------------------------------------------------------------------------- # Standard CMake macros include(FeatureSummary) include(CTest) include(CMakeParseArguments) include(FindPackageHandleStandardArgs) # MITK macros include(mitkFunctionGetGccVersion) include(mitkFunctionCheckCompilerFlags) include(mitkFunctionSuppressWarnings) # includes several functions include(mitkMacroEmptyExternalProject) include(mitkFunctionEnableBuildConfiguration) include(mitkFunctionWhitelists) include(mitkFunctionAddExternalProject) include(mitkFunctionAddLibrarySearchPaths) SUPPRESS_VC_DEPRECATED_WARNINGS() #----------------------------------------------------------------------------- # Set a default build type if none was specified #----------------------------------------------------------------------------- if(NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES) message(STATUS "Setting build type to 'Debug' as none was specified.") set(CMAKE_BUILD_TYPE Debug CACHE STRING "Choose the type of build." FORCE) # Set the possible values of build type for cmake-gui set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug" "Release" "MinSizeRel" "RelWithDebInfo") endif() #----------------------------------------------------------------------------- # Check miminum macOS version #----------------------------------------------------------------------------- # The minimum supported macOS version is 10.14. If you use a version less than # 10.14, there is no guarantee that the build still works. if(APPLE) exec_program(sw_vers ARGS -productVersion OUTPUT_VARIABLE macos_version) if (macos_version VERSION_LESS "10.14") message(WARNING "Detected macOS version \"${macos_version}\" is not supported anymore. Minimum required macOS version is at least 10.14.") endif() if (CMAKE_OSX_DEPLOYMENT_TARGET AND CMAKE_OSX_DEPLOYMENT_TARGET VERSION_LESS 10.14) message(WARNING "Detected macOS deployment target \"${CMAKE_OSX_DEPLOYMENT_TARGET}\" is not supported anymore. Minimum required macOS version is at least 10.14.") endif() endif() #----------------------------------------------------------------------------- # Check miminum compiler versions #----------------------------------------------------------------------------- if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU") # require at least gcc 4.9 as provided by ppa:ubuntu-toolchain-r/test for Ubuntu 14.04 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.9) message(FATAL_ERROR "GCC version must be at least 4.9 If you are using Ubuntu 14.04, you can easily install gcc and g++ 4.9 (or any later version available) in addition to your version ${CMAKE_CXX_COMPILER_VERSION}: sudo add-apt-repository ppa:ubuntu-toolchain-r/test sudo apt-get update sudo apt-get install gcc-4.9 g++-4.9 Make sure to explicitly specify these compilers when configuring MITK: CMAKE_C_COMPILER:FILEPATH=/usr/bin/gcc-4.9 CMAKE_CXX_COMPILER:FILEPATH=/usr/bin/g++-4.9 For more information on the proposed PPA see the Toolchain Updates section of https://wiki.ubuntu.com/ToolChain.") endif() elseif("${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang") # require at least clang 3.4 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.4) message(FATAL_ERROR "Clang version must be at least 3.4") endif() elseif("${CMAKE_CXX_COMPILER_ID}" STREQUAL "AppleClang") # require at least clang 5.0 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0) message(FATAL_ERROR "Apple Clang version must be at least 5.0") endif() elseif("${CMAKE_CXX_COMPILER_ID}" STREQUAL "MSVC") # require at least Visual Studio 2017 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS 19.10) message(FATAL_ERROR "Microsoft Visual Studio 2017 or newer required") endif() else() message(WARNING "You are using an unsupported compiler! Compilation has only been tested with Clang (Linux or Apple), GCC and MSVC.") endif() if(CMAKE_COMPILER_IS_GNUCXX) mitkFunctionGetGccVersion(${CMAKE_CXX_COMPILER} GCC_VERSION) else() set(GCC_VERSION 0) endif() set(MITK_CXX_STANDARD 14) set(CMAKE_CXX_EXTENSIONS 0) set(CMAKE_CXX_STANDARD ${MITK_CXX_STANDARD}) set(CMAKE_CXX_STANDARD_REQUIRED 1) # This is necessary to avoid problems with compile feature checks. # CMAKE_CXX_STANDARD seems to only set the -std=c++14 flag for targets. # However, compile flag checks also need to be done with -std=c++14. # The MITK_CXX14_FLAG variable is also used for external projects # build during the MITK super-build. mitkFunctionCheckCompilerFlags("-std=c++14" MITK_CXX14_FLAG) #----------------------------------------------------------------------------- # Warn if source or build path is too long #----------------------------------------------------------------------------- if(WIN32) set(_src_dir_length_max 50) set(_bin_dir_length_max 50) if(MITK_USE_SUPERBUILD) set(_src_dir_length_max 34) # _src_dir_length_max - strlen(ep/src/ITK-build) set(_bin_dir_length_max 40) # _bin_dir_length_max - strlen(MITK-build) endif() string(LENGTH "${MITK_SOURCE_DIR}" _src_n) string(LENGTH "${MITK_BINARY_DIR}" _bin_n) # The warnings should be converted to errors if(_src_n GREATER _src_dir_length_max) message(WARNING "MITK source code directory path length is too long (${_src_n} > ${_src_dir_length_max})." "Please move the MITK source code directory to a directory with a shorter path." ) endif() if(_bin_n GREATER _bin_dir_length_max) message(WARNING "MITK build directory path length is too long (${_bin_n} > ${_bin_dir_length_max})." "Please move the MITK build directory to a directory with a shorter path." ) endif() endif() #----------------------------------------------------------------------------- # Additional MITK Options (also shown during superbuild) #----------------------------------------------------------------------------- # ----------------------------------------- # General build options option(BUILD_SHARED_LIBS "Build MITK with shared libraries" ON) option(WITH_COVERAGE "Enable/Disable coverage" OFF) option(BUILD_TESTING "Test the project" ON) option(MITK_FAST_TESTING "Disable long-running tests like packaging" OFF) option(MITK_XVFB_TESTING "Execute test drivers through xvfb-run" OFF) option(MITK_BUILD_ALL_APPS "Build all MITK applications" OFF) option(MITK_BUILD_EXAMPLES "Build the MITK Examples" OFF) -option(MITK_ENABLE_PIC_READER "Enable support for reading the DKFZ pic file format." ON) mark_as_advanced( MITK_XVFB_TESTING MITK_FAST_TESTING MITK_BUILD_ALL_APPS - MITK_ENABLE_PIC_READER ) #----------------------------------------------------------------------------- # Set UI testing flags #----------------------------------------------------------------------------- if(MITK_XVFB_TESTING) set(MITK_XVFB_TESTING_COMMAND "xvfb-run" "--auto-servernum" CACHE STRING "Command and options to test through Xvfb") mark_as_advanced(MITK_XVFB_TESTING_COMMAND) endif(MITK_XVFB_TESTING) # ----------------------------------------- # Other options set(MITK_CUSTOM_REVISION_DESC "" CACHE STRING "Override MITK revision description") mark_as_advanced(MITK_CUSTOM_REVISION_DESC) set_property(GLOBAL PROPERTY MITK_EXTERNAL_PROJECTS "") include(CMakeExternals/ExternalProjectList.cmake) foreach(MITK_EXTENSION_DIR ${MITK_ABSOLUTE_EXTENSION_DIRS}) set(MITK_CMAKE_EXTERNALS_EXTENSION_DIR "${MITK_EXTENSION_DIR}/CMakeExternals") if(EXISTS "${MITK_CMAKE_EXTERNALS_EXTENSION_DIR}/ExternalProjectList.cmake") include("${MITK_CMAKE_EXTERNALS_EXTENSION_DIR}/ExternalProjectList.cmake") endif() endforeach() # ----------------------------------------- # Other MITK_USE_* options not related to # external projects build via the # MITK superbuild option(MITK_USE_BLUEBERRY "Build the BlueBerry platform" ON) option(MITK_USE_OpenCL "Use OpenCL GPU-Computing library" OFF) option(MITK_USE_OpenMP "Use OpenMP" OFF) option(MITK_USE_Python3 "Use Python 3" OFF) #----------------------------------------------------------------------------- # Build configurations #----------------------------------------------------------------------------- set(_buildConfigs "Custom") file(GLOB _buildConfigFiles CMake/BuildConfigurations/*.cmake) foreach(_buildConfigFile ${_buildConfigFiles}) get_filename_component(_buildConfigFile ${_buildConfigFile} NAME_WE) list(APPEND _buildConfigs ${_buildConfigFile}) endforeach() foreach(MITK_EXTENSION_DIR ${MITK_ABSOLUTE_EXTENSION_DIRS}) file(GLOB _extBuildConfigFiles "${MITK_EXTENSION_DIR}/CMake/BuildConfigurations/*.cmake") foreach(_extBuildConfigFile ${_extBuildConfigFiles}) get_filename_component(_extBuildConfigFile "${_extBuildConfigFile}" NAME_WE) list(APPEND _buildConfigs "${_extBuildConfigFile}") endforeach() list(REMOVE_DUPLICATES _buildConfigs) endforeach() set(MITK_BUILD_CONFIGURATION "Custom" CACHE STRING "Use pre-defined MITK configurations") set_property(CACHE MITK_BUILD_CONFIGURATION PROPERTY STRINGS ${_buildConfigs}) mitkFunctionEnableBuildConfiguration() mitkFunctionCreateWhitelistPaths(MITK) mitkFunctionFindWhitelists(MITK) # ----------------------------------------- # Qt version related variables option(MITK_USE_Qt5 "Use Qt 5 library" ON) if(MITK_USE_Qt5) if(WIN32) set(MITK_QT5_MINIMUM_VERSION 5.12.9) else() set(MITK_QT5_MINIMUM_VERSION 5.12) endif() set(MITK_QT5_COMPONENTS Concurrent OpenGL PrintSupport Script Sql Svg Widgets Xml XmlPatterns WebEngineWidgets UiTools Help LinguistTools) if(APPLE) list(APPEND MITK_QT5_COMPONENTS DBus) elseif(UNIX) list(APPEND MITK_QT5_COMPONENTS X11Extras) endif() # Hint at default install locations of Qt if(NOT Qt5_DIR) if(MSVC) set(_dir_candidates "C:/Qt") if(CMAKE_GENERATOR MATCHES "^Visual Studio [0-9]+ ([0-9]+)") set(_compilers "msvc${CMAKE_MATCH_1}") elseif(CMAKE_GENERATOR MATCHES "Ninja") include(mitkFunctionGetMSVCVersion) mitkFunctionGetMSVCVersion() if(VISUAL_STUDIO_PRODUCT_NAME MATCHES "^Visual Studio ([0-9]+)") set(_compilers "msvc${CMAKE_MATCH_1}") endif() endif() if(_compilers MATCHES "[0-9]+") if (CMAKE_MATCH_0 EQUAL 2019) list(APPEND _compilers "msvc2017") # Binary compatible to 2019 endif() endif() else() set(_dir_candidates ~/Qt) if(APPLE) set(_compilers clang) else() list(APPEND _dir_candidates /opt/Qt) set(_compilers gcc) endif() endif() if(CMAKE_SIZEOF_VOID_P EQUAL 8) foreach(_compiler ${_compilers}) list(APPEND _compilers64 "${_compiler}_64") endforeach() set(_compilers ${_compilers64}) endif() foreach(_dir_candidate ${_dir_candidates}) get_filename_component(_dir_candidate ${_dir_candidate} REALPATH) foreach(_compiler ${_compilers}) set(_glob_expression "${_dir_candidate}/5.*/${_compiler}") file(GLOB _hints ${_glob_expression}) list(SORT _hints) list(APPEND MITK_QT5_HINTS ${_hints}) endforeach() endforeach() endif() find_package(Qt5 ${MITK_QT5_MINIMUM_VERSION} COMPONENTS ${MITK_QT5_COMPONENTS} REQUIRED HINTS ${MITK_QT5_HINTS}) endif() # ----------------------------------------- # Custom dependency logic if(WIN32 AND Qt5_DIR) set(_dir_candidate "${Qt5_DIR}/../../../../../Tools/OpenSSL/Win_x64") get_filename_component(_dir_candidate ${_dir_candidate} ABSOLUTE) if(EXISTS "${_dir_candidate}") set(OPENSSL_ROOT_DIR "${_dir_candidate}") endif() endif() find_package(OpenSSL) option(MITK_USE_SYSTEM_Boost "Use the system Boost" OFF) set(MITK_USE_Boost_LIBRARIES "" CACHE STRING "A semi-colon separated list of required Boost libraries") if(MITK_USE_cpprestsdk) if(NOT OpenSSL_FOUND) set(openssl_message "Could not find OpenSSL (dependency of C++ REST SDK).\n") if(UNIX) if(APPLE) set(openssl_message "${openssl_message}Please install it using your favorite package management " "system (i.e. Homebrew or MacPorts).\n") else() set(openssl_message "${openssl_message}Please install the dev package of OpenSSL (i.e. libssl-dev).\n") endif() else() set(openssl_message "${openssl_message}Please either install Win32 OpenSSL:\n" " https://slproweb.com/products/Win32OpenSSL.html\n" "Or use the Qt Maintenance tool to install:\n" " Developer and Designer Tools > OpenSSL Toolkit > OpenSSL 64-bit binaries\n") endif() set(openssl_message "${openssl_message}If it still cannot be found, you can hint CMake to find OpenSSL by " "adding/setting the OPENSSL_ROOT_DIR variable to the root directory of an " "OpenSSL installation. Make sure to clear variables of partly found " "versions of OpenSSL before, or they will be mixed up.") message(FATAL_ERROR ${openssl_message}) endif() list(APPEND MITK_USE_Boost_LIBRARIES date_time regex system) if(UNIX) list(APPEND MITK_USE_Boost_LIBRARIES atomic chrono filesystem random thread) endif() list(REMOVE_DUPLICATES MITK_USE_Boost_LIBRARIES) set(MITK_USE_Boost_LIBRARIES ${MITK_USE_Boost_LIBRARIES} CACHE STRING "A semi-colon separated list of required Boost libraries" FORCE) endif() if(MITK_USE_Python3) set(MITK_USE_ZLIB ON CACHE BOOL "" FORCE) if(APPLE AND CMAKE_FRAMEWORK_PATH AND CMAKE_FRAMEWORK_PATH MATCHES "python3\\.?([0-9]+)") find_package(Python3 3.${CMAKE_MATCH_1} EXACT REQUIRED COMPONENTS Interpreter Development NumPy) else() find_package(Python3 REQUIRED COMPONENTS Interpreter Development NumPy) endif() if(WIN32) string(REPLACE "\\" "/" Python3_STDARCH "${Python3_STDARCH}") string(REPLACE "\\" "/" Python3_STDLIB "${Python3_STDLIB}") string(REPLACE "\\" "/" Python3_SITELIB "${Python3_SITELIB}") endif() endif() if(BUILD_TESTING AND NOT MITK_USE_CppUnit) message("> Forcing MITK_USE_CppUnit to ON because BUILD_TESTING=ON") set(MITK_USE_CppUnit ON CACHE BOOL "Use CppUnit for unit tests" FORCE) endif() if(MITK_USE_BLUEBERRY) option(MITK_BUILD_ALL_PLUGINS "Build all MITK plugins" OFF) mark_as_advanced(MITK_BUILD_ALL_PLUGINS) if(NOT MITK_USE_CTK) message("> Forcing MITK_USE_CTK to ON because of MITK_USE_BLUEBERRY") set(MITK_USE_CTK ON CACHE BOOL "Use CTK in MITK" FORCE) endif() endif() #----------------------------------------------------------------------------- # Pixel type multiplexing #----------------------------------------------------------------------------- # Customize the default pixel types for multiplex macros set(MITK_ACCESSBYITK_INTEGRAL_PIXEL_TYPES "int, unsigned int, short, unsigned short, char, unsigned char" CACHE STRING "List of integral pixel types used in AccessByItk and InstantiateAccessFunction macros") set(MITK_ACCESSBYITK_FLOATING_PIXEL_TYPES "double, float" CACHE STRING "List of floating pixel types used in AccessByItk and InstantiateAccessFunction macros") set(MITK_ACCESSBYITK_COMPOSITE_PIXEL_TYPES "itk::RGBPixel, itk::RGBAPixel" CACHE STRING "List of composite pixel types used in AccessByItk and InstantiateAccessFunction macros") set(MITK_ACCESSBYITK_DIMENSIONS "2,3" CACHE STRING "List of dimensions used in AccessByItk and InstantiateAccessFunction macros") mark_as_advanced(MITK_ACCESSBYITK_INTEGRAL_PIXEL_TYPES MITK_ACCESSBYITK_FLOATING_PIXEL_TYPES MITK_ACCESSBYITK_COMPOSITE_PIXEL_TYPES MITK_ACCESSBYITK_DIMENSIONS ) # consistency checks if(NOT MITK_ACCESSBYITK_INTEGRAL_PIXEL_TYPES) set(MITK_ACCESSBYITK_INTEGRAL_PIXEL_TYPES "int, unsigned int, short, unsigned short, char, unsigned char" CACHE STRING "List of integral pixel types used in AccessByItk and InstantiateAccessFunction macros" FORCE) endif() if(NOT MITK_ACCESSBYITK_FLOATING_PIXEL_TYPES) set(MITK_ACCESSBYITK_FLOATING_PIXEL_TYPES "double, float" CACHE STRING "List of floating pixel types used in AccessByItk and InstantiateAccessFunction macros" FORCE) endif() if(NOT MITK_ACCESSBYITK_COMPOSITE_PIXEL_TYPES) set(MITK_ACCESSBYITK_COMPOSITE_PIXEL_TYPES "itk::RGBPixel, itk::RGBAPixel" CACHE STRING "List of composite pixel types used in AccessByItk and InstantiateAccessFunction macros" FORCE) endif() if(NOT MITK_ACCESSBYITK_VECTOR_PIXEL_TYPES) string(REPLACE "," ";" _integral_types ${MITK_ACCESSBYITK_INTEGRAL_PIXEL_TYPES}) string(REPLACE "," ";" _floating_types ${MITK_ACCESSBYITK_FLOATING_PIXEL_TYPES}) foreach(_scalar_type ${_integral_types} ${_floating_types}) set(MITK_ACCESSBYITK_VECTOR_PIXEL_TYPES "${MITK_ACCESSBYITK_VECTOR_PIXEL_TYPES}itk::VariableLengthVector<${_scalar_type}>,") endforeach() string(LENGTH "${MITK_ACCESSBYITK_VECTOR_PIXEL_TYPES}" _length) math(EXPR _length "${_length} - 1") string(SUBSTRING "${MITK_ACCESSBYITK_VECTOR_PIXEL_TYPES}" 0 ${_length} MITK_ACCESSBYITK_VECTOR_PIXEL_TYPES) set(MITK_ACCESSBYITK_VECTOR_PIXEL_TYPES ${MITK_ACCESSBYITK_VECTOR_PIXEL_TYPES} CACHE STRING "List of vector pixel types used in AccessByItk and InstantiateAccessFunction macros for itk::VectorImage types" FORCE) endif() if(NOT MITK_ACCESSBYITK_DIMENSIONS) set(MITK_ACCESSBYITK_DIMENSIONS "2,3" CACHE STRING "List of dimensions used in AccessByItk and InstantiateAccessFunction macros") endif() find_package(Git REQUIRED) #----------------------------------------------------------------------------- # Superbuild script #----------------------------------------------------------------------------- if(MITK_USE_SUPERBUILD) include("${CMAKE_CURRENT_SOURCE_DIR}/SuperBuild.cmake") # Print configuration summary message("\n\n") feature_summary( DESCRIPTION "------- FEATURE SUMMARY FOR ${PROJECT_NAME} -------" WHAT ALL) return() endif() #***************************************************************************** #**************************** END OF SUPERBUILD **************************** #***************************************************************************** #----------------------------------------------------------------------------- # Organize MITK targets in folders #----------------------------------------------------------------------------- set_property(GLOBAL PROPERTY USE_FOLDERS ON) set(MITK_ROOT_FOLDER "MITK" CACHE STRING "") mark_as_advanced(MITK_ROOT_FOLDER) #----------------------------------------------------------------------------- # CMake function(s) and macro(s) #----------------------------------------------------------------------------- include(WriteBasicConfigVersionFile) include(CheckCXXSourceCompiles) include(GenerateExportHeader) include(mitkFunctionAddCustomModuleTest) include(mitkFunctionCheckModuleDependencies) include(mitkFunctionCompileSnippets) include(mitkFunctionConfigureVisualStudioUserProjectFile) include(mitkFunctionCreateBlueBerryApplication) include(mitkFunctionCreateCommandLineApp) include(mitkFunctionCreateModule) include(mitkFunctionCreatePlugin) include(mitkFunctionCreateProvisioningFile) include(mitkFunctionGetLibrarySearchPaths) include(mitkFunctionGetVersion) include(mitkFunctionGetVersionDescription) include(mitkFunctionInstallAutoLoadModules) include(mitkFunctionInstallCTKPlugin) include(mitkFunctionInstallProvisioningFiles) include(mitkFunctionInstallThirdPartyCTKPlugins) include(mitkFunctionOrganizeSources) include(mitkFunctionUseModules) if( ${MITK_USE_MatchPoint} ) include(mitkFunctionCreateMatchPointDeployedAlgorithm) endif() include(mitkMacroConfigureItkPixelTypes) include(mitkMacroCreateExecutable) include(mitkMacroCreateModuleTests) include(mitkMacroGenerateToolsLibrary) include(mitkMacroGetLinuxDistribution) include(mitkMacroGetPMDPlatformString) include(mitkMacroInstall) include(mitkMacroInstallHelperApp) include(mitkMacroInstallTargets) include(mitkMacroMultiplexPicType) # Deprecated include(mitkMacroCreateCTKPlugin) #----------------------------------------------------------------------------- # Global CMake variables #----------------------------------------------------------------------------- # Required and enabled C++14 features for all MITK code. # These are added as PUBLIC compile features to all MITK modules. set(MITK_CXX_FEATURES cxx_auto_type cxx_decltype cxx_enum_forward_declarations cxx_extended_friend_declarations cxx_extern_templates cxx_final cxx_lambdas cxx_local_type_template_args cxx_long_long_type cxx_nullptr cxx_override cxx_range_for cxx_right_angle_brackets cxx_rvalue_references cxx_static_assert cxx_strong_enums cxx_template_template_parameters cxx_trailing_return_types cxx_variadic_macros ) if(NOT DEFINED CMAKE_DEBUG_POSTFIX) # We can't do this yet because the CTK Plugin Framework # cannot cope with a postfix yet. #set(CMAKE_DEBUG_POSTFIX d) endif() #----------------------------------------------------------------------------- # Output directories. #----------------------------------------------------------------------------- set(_default_LIBRARY_output_dir lib) set(_default_RUNTIME_output_dir bin) set(_default_ARCHIVE_output_dir lib) foreach(type LIBRARY RUNTIME ARCHIVE) # Make sure the directory exists if(MITK_CMAKE_${type}_OUTPUT_DIRECTORY AND NOT EXISTS ${MITK_CMAKE_${type}_OUTPUT_DIRECTORY}) message("Creating directory MITK_CMAKE_${type}_OUTPUT_DIRECTORY: ${MITK_CMAKE_${type}_OUTPUT_DIRECTORY}") file(MAKE_DIRECTORY "${MITK_CMAKE_${type}_OUTPUT_DIRECTORY}") endif() if(MITK_CMAKE_${type}_OUTPUT_DIRECTORY) set(CMAKE_${type}_OUTPUT_DIRECTORY ${MITK_CMAKE_${type}_OUTPUT_DIRECTORY}) else() set(CMAKE_${type}_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/${_default_${type}_output_dir}) set(MITK_CMAKE_${type}_OUTPUT_DIRECTORY ${CMAKE_${type}_OUTPUT_DIRECTORY}) endif() set(CMAKE_${type}_OUTPUT_DIRECTORY ${CMAKE_${type}_OUTPUT_DIRECTORY} CACHE INTERNAL "Output directory for ${type} files.") mark_as_advanced(CMAKE_${type}_OUTPUT_DIRECTORY) endforeach() #----------------------------------------------------------------------------- # Set MITK specific options and variables (NOT available during superbuild) #----------------------------------------------------------------------------- if(OpenSSL_FOUND AND WIN32) set(MITK_OPENSSL_SSL_DLL "" CACHE FILEPATH "") set(MITK_OPENSSL_CRYPTO_DLL "" CACHE FILEPATH "") if(MITK_OPENSSL_SSL_DLL AND EXISTS "${MITK_OPENSSL_SSL_DLL}" AND MITK_OPENSSL_CRYPTO_DLL AND EXISTS "${MITK_OPENSSL_CRYPTO_DLL}") foreach(config_type ${CMAKE_CONFIGURATION_TYPES}) execute_process(COMMAND "${CMAKE_COMMAND}" -E make_directory "${MITK_BINARY_DIR}/bin/${config_type}") configure_file("${MITK_OPENSSL_SSL_DLL}" "${MITK_BINARY_DIR}/bin/${config_type}/" COPYONLY) configure_file("${MITK_OPENSSL_CRYPTO_DLL}" "${MITK_BINARY_DIR}/bin/${config_type}/" COPYONLY) endforeach() MITK_INSTALL(FILES "${MITK_OPENSSL_SSL_DLL}" "${MITK_OPENSSL_CRYPTO_DLL}" ) endif() endif() # Look for optional Doxygen package find_package(Doxygen) option(BLUEBERRY_DEBUG_SMARTPOINTER "Enable code for debugging smart pointers" OFF) mark_as_advanced(BLUEBERRY_DEBUG_SMARTPOINTER) # Ask the user to show the console window for applications option(MITK_SHOW_CONSOLE_WINDOW "Use this to enable or disable the console window when starting MITK GUI Applications" ON) mark_as_advanced(MITK_SHOW_CONSOLE_WINDOW) if(NOT MITK_FAST_TESTING) if(MITK_CTEST_SCRIPT_MODE STREQUAL "Continuous" OR MITK_CTEST_SCRIPT_MODE STREQUAL "Experimental") set(MITK_FAST_TESTING ON) endif() endif() if(NOT UNIX) set(MITK_WIN32_FORCE_STATIC "STATIC" CACHE INTERNAL "Use this variable to always build static libraries on non-unix platforms") endif() if(MITK_BUILD_ALL_PLUGINS) set(MITK_BUILD_ALL_PLUGINS_OPTION "FORCE_BUILD_ALL") endif() # Configure pixel types used for ITK image access multiplexing mitkMacroConfigureItkPixelTypes() # Configure module naming conventions set(MITK_MODULE_NAME_REGEX_MATCH "^[A-Z].*$") set(MITK_MODULE_NAME_REGEX_NOT_MATCH "^[Mm][Ii][Tt][Kk].*$") set(MITK_DEFAULT_MODULE_NAME_PREFIX "Mitk") set(MITK_MODULE_NAME_PREFIX ${MITK_DEFAULT_MODULE_NAME_PREFIX}) set(MITK_MODULE_NAME_DEFAULTS_TO_DIRECTORY_NAME 1) #----------------------------------------------------------------------------- # Get MITK version info #----------------------------------------------------------------------------- mitkFunctionGetVersion(${MITK_SOURCE_DIR} MITK) mitkFunctionGetVersionDescription(${MITK_SOURCE_DIR} MITK) # MITK_VERSION set(MITK_VERSION_STRING "${MITK_VERSION_MAJOR}.${MITK_VERSION_MINOR}.${MITK_VERSION_PATCH}") if(MITK_VERSION_PATCH STREQUAL "99") set(MITK_VERSION_STRING "${MITK_VERSION_STRING}-${MITK_REVISION_SHORTID}") endif() #----------------------------------------------------------------------------- # Installation preparation # # These should be set before any MITK install macros are used #----------------------------------------------------------------------------- # on macOS all BlueBerry plugins get copied into every # application bundle (.app directory) specified here if(MITK_USE_BLUEBERRY AND APPLE) foreach(MITK_EXTENSION_DIR ${MITK_DIR_PLUS_EXTENSION_DIRS}) set(MITK_APPLICATIONS_EXTENSION_DIR "${MITK_EXTENSION_DIR}/Applications") if(EXISTS "${MITK_APPLICATIONS_EXTENSION_DIR}/AppList.cmake") set(MITK_APPS "") include("${MITK_APPLICATIONS_EXTENSION_DIR}/AppList.cmake") foreach(mitk_app ${MITK_APPS}) # extract option_name string(REPLACE "^^" "\\;" target_info ${mitk_app}) set(target_info_list ${target_info}) list(GET target_info_list 1 option_name) list(GET target_info_list 0 app_name) # check if the application is enabled if(${option_name} OR MITK_BUILD_ALL_APPS) set(MACOSX_BUNDLE_NAMES ${MACOSX_BUNDLE_NAMES} Mitk${app_name}) endif() endforeach() endif() endforeach() endif() #----------------------------------------------------------------------------- # Set coverage Flags #----------------------------------------------------------------------------- if(WITH_COVERAGE) if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU") set(coverage_flags "-g -fprofile-arcs -ftest-coverage -O0 -DNDEBUG") set(COVERAGE_CXX_FLAGS ${coverage_flags}) set(COVERAGE_C_FLAGS ${coverage_flags}) endif() endif() #----------------------------------------------------------------------------- # MITK C/CXX Flags #----------------------------------------------------------------------------- set(MITK_C_FLAGS "${COVERAGE_C_FLAGS}") set(MITK_C_FLAGS_DEBUG ) set(MITK_C_FLAGS_RELEASE ) set(MITK_CXX_FLAGS "${COVERAGE_CXX_FLAGS} ${MITK_CXX14_FLAG}") set(MITK_CXX_FLAGS_DEBUG ) set(MITK_CXX_FLAGS_RELEASE ) set(MITK_EXE_LINKER_FLAGS ) set(MITK_SHARED_LINKER_FLAGS ) if(WIN32) set(MITK_CXX_FLAGS "${MITK_CXX_FLAGS} -DPOCO_NO_UNWINDOWS -DWIN32_LEAN_AND_MEAN -DNOMINMAX") mitkFunctionCheckCompilerFlags("/wd4005" MITK_CXX_FLAGS) # warning C4005: macro redefinition mitkFunctionCheckCompilerFlags("/wd4231" MITK_CXX_FLAGS) # warning C4231: nonstandard extension used : 'extern' before template explicit instantiation # the following line should be removed after fixing bug 17637 mitkFunctionCheckCompilerFlags("/wd4316" MITK_CXX_FLAGS) # warning C4316: object alignment on heap mitkFunctionCheckCompilerFlags("/wd4180" MITK_CXX_FLAGS) # warning C4180: qualifier applied to function type has no meaning mitkFunctionCheckCompilerFlags("/wd4251" MITK_CXX_FLAGS) # warning C4251: 'identifier' : class 'type' needs to have dll-interface to be used by clients of class 'type2' endif() if(APPLE) set(MITK_CXX_FLAGS "${MITK_CXX_FLAGS} -DGL_SILENCE_DEPRECATION") # Apple deprecated OpenGL in macOS 10.14 endif() if(NOT MSVC_VERSION) foreach(_flag -Wall -Wextra -Wpointer-arith -Winvalid-pch -Wcast-align -Wwrite-strings -Wno-error=gnu -Wno-error=unknown-pragmas # The strict-overflow warning is generated by ITK template code -Wno-error=strict-overflow -Woverloaded-virtual -Wstrict-null-sentinel #-Wold-style-cast #-Wsign-promo -Wno-error=deprecated-copy -Wno-array-bounds -fdiagnostics-show-option ) mitkFunctionCheckCAndCXXCompilerFlags(${_flag} MITK_C_FLAGS MITK_CXX_FLAGS) endforeach() endif() if(CMAKE_COMPILER_IS_GNUCXX AND NOT APPLE) mitkFunctionCheckCompilerFlags("-Wl,--no-undefined" MITK_SHARED_LINKER_FLAGS) mitkFunctionCheckCompilerFlags("-Wl,--as-needed" MITK_SHARED_LINKER_FLAGS) endif() if(CMAKE_COMPILER_IS_GNUCXX) mitkFunctionCheckCAndCXXCompilerFlags("-fstack-protector-all" MITK_C_FLAGS MITK_CXX_FLAGS) set(MITK_CXX_FLAGS_RELEASE "-U_FORTIFY_SOURCES -D_FORTIFY_SOURCE=2 ${MITK_CXX_FLAGS_RELEASE}") endif() set(MITK_MODULE_LINKER_FLAGS ${MITK_SHARED_LINKER_FLAGS}) set(MITK_EXE_LINKER_FLAGS ${MITK_SHARED_LINKER_FLAGS}) #----------------------------------------------------------------------------- # MITK Packages #----------------------------------------------------------------------------- set(MITK_MODULES_PACKAGE_DEPENDS_DIR ${MITK_SOURCE_DIR}/CMake/PackageDepends) set(MODULES_PACKAGE_DEPENDS_DIRS ${MITK_MODULES_PACKAGE_DEPENDS_DIR}) foreach(MITK_EXTENSION_DIR ${MITK_ABSOLUTE_EXTENSION_DIRS}) set(MITK_PACKAGE_DEPENDS_EXTENSION_DIR "${MITK_EXTENSION_DIR}/CMake/PackageDepends") if(EXISTS "${MITK_PACKAGE_DEPENDS_EXTENSION_DIR}") list(APPEND MODULES_PACKAGE_DEPENDS_DIRS "${MITK_PACKAGE_DEPENDS_EXTENSION_DIR}") endif() endforeach() if(NOT MITK_USE_SYSTEM_Boost) set(Boost_NO_SYSTEM_PATHS 1) endif() set(Boost_USE_MULTITHREADED 1) set(Boost_USE_STATIC_LIBS 0) set(Boost_USE_STATIC_RUNTIME 0) set(Boost_ADDITIONAL_VERSIONS 1.74 1.74.0) # We need this later for a DCMTK workaround set(_dcmtk_dir_orig ${DCMTK_DIR}) # This property is populated at the top half of this file get_property(MITK_EXTERNAL_PROJECTS GLOBAL PROPERTY MITK_EXTERNAL_PROJECTS) foreach(ep ${MITK_EXTERNAL_PROJECTS}) get_property(_package GLOBAL PROPERTY MITK_${ep}_PACKAGE) get_property(_components GLOBAL PROPERTY MITK_${ep}_COMPONENTS) if(MITK_USE_${ep} AND _package) if(_components) find_package(${_package} COMPONENTS ${_components} REQUIRED CONFIG) else() # Prefer config mode first because it finds external # Config.cmake files pointed at by _DIR variables. # Otherwise, existing Find.cmake files could fail. if(DEFINED ${_package}_DIR) #we store the information because it will be overwritten by find_package #and would get lost for all EPs that use on Find.cmake instead of config #files. set(_temp_EP_${_package}_dir ${${_package}_DIR}) endif(DEFINED ${_package}_DIR) find_package(${_package} QUIET CONFIG) string(TOUPPER "${_package}" _package_uc) if(NOT (${_package}_FOUND OR ${_package_uc}_FOUND)) if(DEFINED _temp_EP_${_package}_dir) set(${_package}_DIR ${_temp_EP_${_package}_dir} CACHE PATH "externaly set dir of the package ${_package}" FORCE) endif(DEFINED _temp_EP_${_package}_dir) find_package(${_package} REQUIRED) endif() endif() endif() endforeach() # Ensure that the MITK CMake module path comes first set(CMAKE_MODULE_PATH ${MITK_CMAKE_DIR} ${CMAKE_MODULE_PATH} ) if(MITK_USE_DCMTK) if(${_dcmtk_dir_orig} MATCHES "${MITK_EXTERNAL_PROJECT_PREFIX}.*") # Help our FindDCMTK.cmake script find our super-build DCMTK set(DCMTK_DIR ${MITK_EXTERNAL_PROJECT_PREFIX}) else() # Use the original value set(DCMTK_DIR ${_dcmtk_dir_orig}) endif() endif() if(MITK_USE_DCMQI) # Due to the preferred CONFIG mode in find_package calls above, # the DCMQIConfig.cmake file is read, which does not provide useful # package information. We explictly need MODULE mode to find DCMQI. # Help our FindDCMQI.cmake script find our super-build DCMQI set(DCMQI_DIR ${MITK_EXTERNAL_PROJECT_PREFIX}) find_package(DCMQI REQUIRED) endif() if(MITK_USE_OpenIGTLink) link_directories(${OpenIGTLink_LIBRARY_DIRS}) endif() if(MITK_USE_OpenCL) find_package(OpenCL REQUIRED) endif() if(MITK_USE_OpenMP) find_package(OpenMP REQUIRED COMPONENTS CXX) else() find_package(OpenMP QUIET COMPONENTS CXX) if(OpenMP_FOUND) set(MITK_USE_OpenMP ON CACHE BOOL "" FORCE) elseif(APPLE AND OpenMP_libomp_LIBRARY AND NOT OpenMP_CXX_LIB_NAMES) set(OpenMP_CXX_LIB_NAMES libomp CACHE STRING "" FORCE) get_filename_component(openmp_lib_dir "${OpenMP_libomp_LIBRARY}" DIRECTORY) set(openmp_include_dir "${openmp_lib_dir}/../include") if(EXISTS "${openmp_include_dir}") get_filename_component(openmp_include_dir "${openmp_include_dir}" REALPATH) set(OpenMP_CXX_FLAGS "-Xpreprocessor -fopenmp -I${openmp_include_dir}" CACHE STRING "" FORCE) find_package(OpenMP QUIET COMPONENTS CXX) if(OpenMP_FOUND) set(MITK_USE_OpenMP ON CACHE BOOL "" FORCE) endif() endif() endif() endif() # Qt support if(MITK_USE_Qt5) find_package(Qt5Core ${MITK_QT5_MINIMUM_VERSION} REQUIRED) # at least Core required get_target_property(_qmake_exec Qt5::qmake LOCATION) execute_process(COMMAND ${_qmake_exec} -query QT_INSTALL_BINS RESULT_VARIABLE _result OUTPUT_VARIABLE QT_BINARY_DIR ERROR_VARIABLE _error ) string(STRIP "${QT_BINARY_DIR}" QT_BINARY_DIR) if(_result OR NOT EXISTS "${QT_BINARY_DIR}") message(FATAL_ERROR "Could not determine Qt binary directory: ${_result} ${QT_BINARY_DIR} ${_error}") endif() find_program(QT_HELPGENERATOR_EXECUTABLE NAMES qhelpgenerator qhelpgenerator-qt5 qhelpgenerator5 PATHS ${QT_BINARY_DIR} NO_DEFAULT_PATH ) find_program(QT_COLLECTIONGENERATOR_EXECUTABLE NAMES qcollectiongenerator qcollectiongenerator-qt5 qcollectiongenerator5 PATHS ${QT_BINARY_DIR} NO_DEFAULT_PATH ) find_program(QT_ASSISTANT_EXECUTABLE NAMES assistant assistant-qt5 assistant5 PATHS ${QT_BINARY_DIR} NO_DEFAULT_PATH ) find_program(QT_XMLPATTERNS_EXECUTABLE NAMES xmlpatterns PATHS ${QT_BINARY_DIR} NO_DEFAULT_PATH ) mark_as_advanced(QT_HELPGENERATOR_EXECUTABLE QT_COLLECTIONGENERATOR_EXECUTABLE QT_ASSISTANT_EXECUTABLE QT_XMLPATTERNS_EXECUTABLE ) if(MITK_USE_BLUEBERRY) option(BLUEBERRY_USE_QT_HELP "Enable support for integrating plugin documentation into Qt Help" ${DOXYGEN_FOUND}) mark_as_advanced(BLUEBERRY_USE_QT_HELP) # Sanity checks for in-application BlueBerry plug-in help generation if(BLUEBERRY_USE_QT_HELP) set(_force_blueberry_use_qt_help_to_off 0) if(NOT DOXYGEN_FOUND) message("> Forcing BLUEBERRY_USE_QT_HELP to OFF because Doxygen was not found.") set(_force_blueberry_use_qt_help_to_off 1) endif() if(DOXYGEN_FOUND AND DOXYGEN_VERSION VERSION_LESS 1.8.7) message("> Forcing BLUEBERRY_USE_QT_HELP to OFF because Doxygen version 1.8.7 or newer not found.") set(_force_blueberry_use_qt_help_to_off 1) endif() if(NOT QT_HELPGENERATOR_EXECUTABLE) message("> Forcing BLUEBERRY_USE_QT_HELP to OFF because QT_HELPGENERATOR_EXECUTABLE is empty.") set(_force_blueberry_use_qt_help_to_off 1) endif() if(NOT MITK_USE_Qt5) message("> Forcing BLUEBERRY_USE_QT_HELP to OFF because MITK_USE_Qt5 is OFF.") set(_force_blueberry_use_qt_help_to_off 1) endif() if(NOT QT_XMLPATTERNS_EXECUTABLE) message("You have enabled Qt Help support, but QT_XMLPATTERNS_EXECUTABLE is empty") set(_force_blueberry_use_qt_help_to_off 1) endif() if(_force_blueberry_use_qt_help_to_off) set(BLUEBERRY_USE_QT_HELP OFF CACHE BOOL "Enable support for integrating plugin documentation into Qt Help" FORCE) endif() endif() if(BLUEBERRY_QT_HELP_REQUIRED AND NOT BLUEBERRY_USE_QT_HELP) message(FATAL_ERROR "BLUEBERRY_USE_QT_HELP is required to be set to ON") endif() endif() endif() #----------------------------------------------------------------------------- # Testing #----------------------------------------------------------------------------- if(BUILD_TESTING) #[[ See T27701 # Initial cache for ProjectTemplate and PluginGenerator tests configure_file( CMake/mitkTestInitialCache.txt.in ${MITK_BINARY_DIR}/mitkTestInitialCache.txt @ONLY )]] # Configuration for the CMake-generated test driver set(CMAKE_TESTDRIVER_EXTRA_INCLUDES "#include ") set(CMAKE_TESTDRIVER_BEFORE_TESTMAIN " try {") set(CMAKE_TESTDRIVER_AFTER_TESTMAIN " } catch (const std::exception& e) { fprintf(stderr, \"%s\\n\", e.what()); return EXIT_FAILURE; } catch (...) { printf(\"Exception caught in the test driver\\n\"); return EXIT_FAILURE; }") set(MITK_TEST_OUTPUT_DIR "${MITK_BINARY_DIR}/test_output") if(NOT EXISTS ${MITK_TEST_OUTPUT_DIR}) file(MAKE_DIRECTORY ${MITK_TEST_OUTPUT_DIR}) endif() # Test the package target include(mitkPackageTest) endif() configure_file(mitkTestingConfig.h.in ${MITK_BINARY_DIR}/mitkTestingConfig.h) #----------------------------------------------------------------------------- # MITK_SUPERBUILD_BINARY_DIR #----------------------------------------------------------------------------- # If MITK_SUPERBUILD_BINARY_DIR isn't defined, it means MITK is *NOT* build using Superbuild. # In that specific case, MITK_SUPERBUILD_BINARY_DIR should default to MITK_BINARY_DIR if(NOT DEFINED MITK_SUPERBUILD_BINARY_DIR) set(MITK_SUPERBUILD_BINARY_DIR ${MITK_BINARY_DIR}) endif() #----------------------------------------------------------------------------- # Set C/CXX and linker flags for MITK code #----------------------------------------------------------------------------- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${MITK_CXX_FLAGS}") set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} ${MITK_CXX_FLAGS_DEBUG}") set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} ${MITK_CXX_FLAGS_RELEASE}") set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${MITK_C_FLAGS}") set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} ${MITK_C_FLAGS_DEBUG}") set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} ${MITK_C_FLAGS_RELEASE}") set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${MITK_EXE_LINKER_FLAGS}") set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} ${MITK_SHARED_LINKER_FLAGS}") set(CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} ${MITK_MODULE_LINKER_FLAGS}") #----------------------------------------------------------------------------- # Add subdirectories #----------------------------------------------------------------------------- add_subdirectory(Utilities) add_subdirectory(Modules) include("${CMAKE_CURRENT_SOURCE_DIR}/Modules/ModuleList.cmake") mitkFunctionWhitelistModules(MITK MITK_MODULES) set(MITK_ROOT_FOLDER_BACKUP "${MITK_ROOT_FOLDER}") foreach(MITK_EXTENSION_DIR ${MITK_ABSOLUTE_EXTENSION_DIRS}) get_filename_component(MITK_ROOT_FOLDER "${MITK_EXTENSION_DIR}" NAME) set(MITK_MODULES_EXTENSION_DIR "${MITK_EXTENSION_DIR}/Modules") if(EXISTS "${MITK_MODULES_EXTENSION_DIR}/ModuleList.cmake") set(MITK_MODULES "") include("${MITK_MODULES_EXTENSION_DIR}/ModuleList.cmake") foreach(mitk_module ${MITK_MODULES}) add_subdirectory("${MITK_MODULES_EXTENSION_DIR}/${mitk_module}" "Modules/${mitk_module}") endforeach() endif() set(MITK_MODULE_NAME_PREFIX ${MITK_DEFAULT_MODULE_NAME_PREFIX}) endforeach() set(MITK_ROOT_FOLDER "${MITK_ROOT_FOLDER_BACKUP}") add_subdirectory(Wrapping) set(MITK_DOXYGEN_OUTPUT_DIR "${PROJECT_BINARY_DIR}/Documentation/Doxygen" CACHE PATH "Output directory for doxygen generated documentation.") if(MITK_USE_BLUEBERRY) include("${CMAKE_CURRENT_SOURCE_DIR}/Plugins/PluginList.cmake") mitkFunctionWhitelistPlugins(MITK MITK_PLUGINS) set(mitk_plugins_fullpath "") foreach(mitk_plugin ${MITK_PLUGINS}) list(APPEND mitk_plugins_fullpath Plugins/${mitk_plugin}) endforeach() set(MITK_PLUGIN_REGEX_LIST "") foreach(MITK_EXTENSION_DIR ${MITK_ABSOLUTE_EXTENSION_DIRS}) set(MITK_PLUGINS_EXTENSION_DIR "${MITK_EXTENSION_DIR}/Plugins") if(EXISTS "${MITK_PLUGINS_EXTENSION_DIR}/PluginList.cmake") set(MITK_PLUGINS "") include("${MITK_PLUGINS_EXTENSION_DIR}/PluginList.cmake") foreach(mitk_plugin ${MITK_PLUGINS}) list(APPEND mitk_plugins_fullpath "${MITK_PLUGINS_EXTENSION_DIR}/${mitk_plugin}") endforeach() endif() endforeach() if(EXISTS ${MITK_PRIVATE_MODULES}/PluginList.cmake) include(${MITK_PRIVATE_MODULES}/PluginList.cmake) foreach(mitk_plugin ${MITK_PRIVATE_PLUGINS}) list(APPEND mitk_plugins_fullpath ${MITK_PRIVATE_MODULES}/${mitk_plugin}) endforeach() endif() if(MITK_BUILD_EXAMPLES) include("${CMAKE_CURRENT_SOURCE_DIR}/Examples/Plugins/PluginList.cmake") set(mitk_example_plugins_fullpath ) foreach(mitk_example_plugin ${MITK_EXAMPLE_PLUGINS}) list(APPEND mitk_example_plugins_fullpath Examples/Plugins/${mitk_example_plugin}) list(APPEND mitk_plugins_fullpath Examples/Plugins/${mitk_example_plugin}) endforeach() endif() # Specify which plug-ins belong to this project macro(GetMyTargetLibraries all_target_libraries varname) set(re_ctkplugin_mitk "^org_mitk_[a-zA-Z0-9_]+$") set(re_ctkplugin_bb "^org_blueberry_[a-zA-Z0-9_]+$") set(_tmp_list) list(APPEND _tmp_list ${all_target_libraries}) ctkMacroListFilter(_tmp_list re_ctkplugin_mitk re_ctkplugin_bb MITK_PLUGIN_REGEX_LIST OUTPUT_VARIABLE ${varname}) endmacro() # Get infos about application directories and build options set(mitk_apps_fullpath "") foreach(MITK_EXTENSION_DIR ${MITK_DIR_PLUS_EXTENSION_DIRS}) set(MITK_APPLICATIONS_EXTENSION_DIR "${MITK_EXTENSION_DIR}/Applications") if(EXISTS "${MITK_APPLICATIONS_EXTENSION_DIR}/AppList.cmake") set(MITK_APPS "") include("${MITK_APPLICATIONS_EXTENSION_DIR}/AppList.cmake") foreach(mitk_app ${MITK_APPS}) # extract option_name string(REPLACE "^^" "\\;" target_info ${mitk_app}) set(target_info_list ${target_info}) list(GET target_info_list 0 directory_name) list(GET target_info_list 1 option_name) if(${option_name}) list(APPEND mitk_apps_fullpath "${MITK_APPLICATIONS_EXTENSION_DIR}/${directory_name}^^${option_name}") endif() endforeach() endif() endforeach() if (mitk_plugins_fullpath) ctkMacroSetupPlugins(${mitk_plugins_fullpath} BUILD_OPTION_PREFIX MITK_BUILD_ APPS ${mitk_apps_fullpath} BUILD_ALL ${MITK_BUILD_ALL_PLUGINS} COMPACT_OPTIONS) endif() set(MITK_PLUGIN_USE_FILE "${MITK_BINARY_DIR}/MitkPluginUseFile.cmake") if(${PROJECT_NAME}_PLUGIN_LIBRARIES) ctkFunctionGeneratePluginUseFile(${MITK_PLUGIN_USE_FILE}) else() file(REMOVE ${MITK_PLUGIN_USE_FILE}) set(MITK_PLUGIN_USE_FILE ) endif() endif() #----------------------------------------------------------------------------- # Documentation #----------------------------------------------------------------------------- if(DOXYGEN_FOUND) add_subdirectory(Documentation) endif() #----------------------------------------------------------------------------- # Installation #----------------------------------------------------------------------------- # set MITK cpack variables # These are the default variables, which can be overwritten ( see below ) include(mitkSetupCPack) set(use_default_config ON) set(ALL_MITK_APPS "") set(activated_apps_no 0) foreach(MITK_EXTENSION_DIR ${MITK_DIR_PLUS_EXTENSION_DIRS}) set(MITK_APPLICATIONS_EXTENSION_DIR "${MITK_EXTENSION_DIR}/Applications") if(EXISTS "${MITK_APPLICATIONS_EXTENSION_DIR}/AppList.cmake") set(MITK_APPS "") include("${MITK_APPLICATIONS_EXTENSION_DIR}/AppList.cmake") foreach(mitk_app ${MITK_APPS}) string(REPLACE "^^" "\\;" target_info ${mitk_app}) set(target_info_list ${target_info}) list(GET target_info_list 0 directory_name) list(GET target_info_list 1 option_name) list(GET target_info_list 2 executable_name) list(APPEND ALL_MITK_APPS "${MITK_EXTENSION_DIR}/Applications/${directory_name}^^${option_name}^^${executable_name}") if(${option_name} OR MITK_BUILD_ALL_APPS) MATH(EXPR activated_apps_no "${activated_apps_no} + 1") endif() endforeach() endif() endforeach() list(LENGTH ALL_MITK_APPS app_count) if(app_count EQUAL 1 AND (activated_apps_no EQUAL 1 OR MITK_BUILD_ALL_APPS)) # Corner case if there is only one app in total set(use_project_cpack ON) elseif(activated_apps_no EQUAL 1 AND NOT MITK_BUILD_ALL_APPS) # Only one app is enabled (no "build all" flag set) set(use_project_cpack ON) else() # Less or more then one app is enabled set(use_project_cpack OFF) endif() foreach(mitk_app ${ALL_MITK_APPS}) # extract target_dir and option_name string(REPLACE "^^" "\\;" target_info ${mitk_app}) set(target_info_list ${target_info}) list(GET target_info_list 0 target_dir) list(GET target_info_list 1 option_name) list(GET target_info_list 2 executable_name) # check if the application is enabled if(${option_name} OR MITK_BUILD_ALL_APPS) # check whether application specific configuration files will be used if(use_project_cpack) # use files if they exist if(EXISTS "${target_dir}/CPackOptions.cmake") include("${target_dir}/CPackOptions.cmake") endif() if(EXISTS "${target_dir}/CPackConfig.cmake.in") set(CPACK_PROJECT_CONFIG_FILE "${target_dir}/CPackConfig.cmake") configure_file(${target_dir}/CPackConfig.cmake.in ${CPACK_PROJECT_CONFIG_FILE} @ONLY) set(use_default_config OFF) endif() endif() # add link to the list list(APPEND CPACK_CREATE_DESKTOP_LINKS "${executable_name}") endif() endforeach() # if no application specific configuration file was used, use default if(use_default_config) configure_file(${MITK_SOURCE_DIR}/MITKCPackOptions.cmake.in ${MITK_BINARY_DIR}/MITKCPackOptions.cmake @ONLY) set(CPACK_PROJECT_CONFIG_FILE "${MITK_BINARY_DIR}/MITKCPackOptions.cmake") endif() # include CPack model once all variables are set include(CPack) # Additional installation rules include(mitkInstallRules) #----------------------------------------------------------------------------- # Last configuration steps #----------------------------------------------------------------------------- # ---------------- Export targets ----------------- set(MITK_EXPORTS_FILE "${MITK_BINARY_DIR}/MitkExports.cmake") file(REMOVE ${MITK_EXPORTS_FILE}) set(targets_to_export) get_property(module_targets GLOBAL PROPERTY MITK_MODULE_TARGETS) if(module_targets) list(APPEND targets_to_export ${module_targets}) endif() if(MITK_USE_BLUEBERRY) if(MITK_PLUGIN_LIBRARIES) list(APPEND targets_to_export ${MITK_PLUGIN_LIBRARIES}) endif() endif() export(TARGETS ${targets_to_export} APPEND FILE ${MITK_EXPORTS_FILE}) set(MITK_EXPORTED_TARGET_PROPERTIES ) foreach(target_to_export ${targets_to_export}) get_target_property(autoload_targets ${target_to_export} MITK_AUTOLOAD_TARGETS) if(autoload_targets) set(MITK_EXPORTED_TARGET_PROPERTIES "${MITK_EXPORTED_TARGET_PROPERTIES} set_target_properties(${target_to_export} PROPERTIES MITK_AUTOLOAD_TARGETS \"${autoload_targets}\")") endif() get_target_property(autoload_dir ${target_to_export} MITK_AUTOLOAD_DIRECTORY) if(autoload_dir) set(MITK_EXPORTED_TARGET_PROPERTIES "${MITK_EXPORTED_TARGET_PROPERTIES} set_target_properties(${target_to_export} PROPERTIES MITK_AUTOLOAD_DIRECTORY \"${autoload_dir}\")") endif() get_target_property(deprecated_module ${target_to_export} MITK_MODULE_DEPRECATED_SINCE) if(deprecated_module) set(MITK_EXPORTED_TARGET_PROPERTIES "${MITK_EXPORTED_TARGET_PROPERTIES} set_target_properties(${target_to_export} PROPERTIES MITK_MODULE_DEPRECATED_SINCE \"${deprecated_module}\")") endif() endforeach() # ---------------- External projects ----------------- get_property(MITK_ADDITIONAL_LIBRARY_SEARCH_PATHS_CONFIG GLOBAL PROPERTY MITK_ADDITIONAL_LIBRARY_SEARCH_PATHS) set(MITK_CONFIG_EXTERNAL_PROJECTS ) #string(REPLACE "^^" ";" _mitk_external_projects ${MITK_EXTERNAL_PROJECTS}) foreach(ep ${MITK_EXTERNAL_PROJECTS}) get_property(_components GLOBAL PROPERTY MITK_${ep}_COMPONENTS) set(MITK_CONFIG_EXTERNAL_PROJECTS "${MITK_CONFIG_EXTERNAL_PROJECTS} set(MITK_USE_${ep} ${MITK_USE_${ep}}) set(MITK_${ep}_DIR \"${${ep}_DIR}\") set(MITK_${ep}_COMPONENTS ${_components}) ") endforeach() foreach(ep ${MITK_EXTERNAL_PROJECTS}) get_property(_package GLOBAL PROPERTY MITK_${ep}_PACKAGE) get_property(_components GLOBAL PROPERTY MITK_${ep}_COMPONENTS) if(_components) set(_components_arg COMPONENTS \${_components}) else() set(_components_arg) endif() if(_package) set(MITK_CONFIG_EXTERNAL_PROJECTS "${MITK_CONFIG_EXTERNAL_PROJECTS} if(MITK_USE_${ep}) set(${ep}_DIR \${MITK_${ep}_DIR}) if(MITK_${ep}_COMPONENTS) mitkMacroFindDependency(${_package} COMPONENTS \${MITK_${ep}_COMPONENTS}) else() mitkMacroFindDependency(${_package}) endif() endif()") endif() endforeach() # ---------------- Tools ----------------- configure_file(${MITK_SOURCE_DIR}/CMake/ToolExtensionITKFactory.cpp.in ${MITK_BINARY_DIR}/ToolExtensionITKFactory.cpp.in COPYONLY) configure_file(${MITK_SOURCE_DIR}/CMake/ToolExtensionITKFactoryLoader.cpp.in ${MITK_BINARY_DIR}/ToolExtensionITKFactoryLoader.cpp.in COPYONLY) configure_file(${MITK_SOURCE_DIR}/CMake/ToolGUIExtensionITKFactory.cpp.in ${MITK_BINARY_DIR}/ToolGUIExtensionITKFactory.cpp.in COPYONLY) # ---------------- Configure files ----------------- configure_file(mitkVersion.h.in ${MITK_BINARY_DIR}/mitkVersion.h) configure_file(mitkConfig.h.in ${MITK_BINARY_DIR}/mitkConfig.h) set(IPFUNC_INCLUDE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/Utilities/ipFunc) set(UTILITIES_DIR ${CMAKE_CURRENT_SOURCE_DIR}/Utilities) configure_file(mitkConfig.h.in ${MITK_BINARY_DIR}/mitkConfig.h) configure_file(MITKConfig.cmake.in ${MITK_BINARY_DIR}/MITKConfig.cmake @ONLY) write_basic_config_version_file(${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}ConfigVersion.cmake VERSION ${MITK_VERSION_STRING} COMPATIBILITY AnyNewerVersion) #----------------------------------------------------------------------------- # MITK Applications #----------------------------------------------------------------------------- # This must come after MITKConfig.h was generated, since applications # might do a find_package(MITK REQUIRED). add_subdirectory(Applications) if(MSVC AND TARGET MitkWorkbench) set_directory_properties(PROPERTIES VS_STARTUP_PROJECT MitkWorkbench) endif() foreach(MITK_EXTENSION_DIR ${MITK_ABSOLUTE_EXTENSION_DIRS}) set(MITK_APPLICATIONS_EXTENSION_DIR "${MITK_EXTENSION_DIR}/Applications") if(EXISTS "${MITK_APPLICATIONS_EXTENSION_DIR}/CMakeLists.txt") add_subdirectory("${MITK_APPLICATIONS_EXTENSION_DIR}" "Applications") endif() endforeach() #----------------------------------------------------------------------------- # MITK Examples #----------------------------------------------------------------------------- if(MITK_BUILD_EXAMPLES) # This must come after MITKConfig.h was generated, since applications # might do a find_package(MITK REQUIRED). add_subdirectory(Examples) endif() #----------------------------------------------------------------------------- # Print configuration summary #----------------------------------------------------------------------------- message("\n\n") feature_summary( DESCRIPTION "------- FEATURE SUMMARY FOR ${PROJECT_NAME} -------" WHAT ALL ) diff --git a/Documentation/Doxygen/3-DeveloperManual/Concepts/Logging.dox b/Documentation/Doxygen/3-DeveloperManual/Concepts/Logging.dox index c300b9c0a7..b4d0f0172a 100644 --- a/Documentation/Doxygen/3-DeveloperManual/Concepts/Logging.dox +++ b/Documentation/Doxygen/3-DeveloperManual/Concepts/Logging.dox @@ -1,72 +1,72 @@ /** \page LoggingPage Logging Concept \tableofcontents \section LoggingPageSection1 Basic Information on Logging To use logging in MITK you can stream your messages into a logging stream, similar to the "std::cout" stream in standard c++. A simple example is shown next. \code MITK_INFO << "Here comes my message"; \endcode Please only use the MITK_INFO (respectively MITK_WARN, MITK_ERROR, MITK_FATAL, MITK_DEBUG, see \ref LoggingPageSection3 for more details) in MITK, the std::cout stream should not be used. You can also log object information, like shown in the next example. \code MITK_INFO << "I want to log my vector size: " << m_vector.getSize(); \endcode All logged information will be displayed in the console and be written to a logging file in the MITK binary folder. Advanced users may want to know that this behavior is controlled by the logging backend class, which can be adapted if you want to change the behavior. This is everything you need to know about simple logging. Further reading will show you how you can categorize your logging message and what logging levels are. \section LoggingPageSection2 Categorize your Logging Messages You may also want to categorize your logging messages, so you can assign messages to your specific topic. You can simply add classes and subclasses to your MITK logging messages by using brackets, like shown in the next example. \code MITK_INFO << "no class"; MITK_INFO("MyClass") << "single class"; MITK_INFO("MyClass")("MySubClass") << "class with subclass"; \endcode This classes makes it easy to e.g. simply filter all logging messages only for relevant information. \section LoggingPageSection3 Logging Levels MITK offers different logging levels. You may mostly want to use MITK_INFO, but please consider using the other levels, e.g. when logging debug information or errors. Debug (MITK_DEBUG): These messages are designed for debug output, used to debug your source code. Example: \code MITK_DEBUG << "Result of method LoadPicture(): true." \endcode These messages are only displayed if you turn the CMake-Variable MBILOG_ENABLE_DEBUG_MESSAGES on. You can also use the debug message in release mode, output only depends on the CMake-Variable. If you want to enable the debug messages only for a single class / module / plugin you can also simply define the variable in your source code for the time you want to see the messages. Therefore you add a line "#define MBILOG_ENABLE_DEBUG" in the beginning of your cpp file. But don't forget to remove the definition before commiting the source code. Info (MITK_INFO): For standard information messages that inform about expected changes/results in the program flow. Info messages should be important and understandable for the users of the program. Example: \code -MITK_INFO << "The picture test.pic has been loaded successfully." +MITK_INFO << "The picture test.nrrd has been loaded successfully." \endcode Warning (MITK_WARN): Warning messages should inform about unexpected or potentially problematic states in the program flow that do not lead directly to an error. Thus, after a warning the program should be able continue without errors and in a clear state. Example: \code -MITK_WARN << "The picture test.pic was not loaded because access was denied." +MITK_WARN << "The picture test.nrrd was not loaded because access was denied." \endcode Error (MITK_ERROR): Error messages notify the user about corrupt states in the program flow. Such states may occur after unexpected behavior of source code. Example: \code -MITK_ERROR << "Error while adding test.pic to the data storage, aborting." +MITK_ERROR << "Error while adding test.nrrd to the data storage, aborting." \endcode Fatal (MITK_FATAL): Fatal messages report corrupt states in the program flow that lead directly to a crash of the program. Example: \code MITK_FATAL << "Memory allocation error during instantiation of image object." \endcode \section LoggingPageSection4 Conditional Logging Another feature of the logging mechanism is that you can directly give conditions for logging your message. These bool values or expressions can be defined in brackets. An example is shown next. \code MITK_INFO(x>1000) << "x is too large"; //logs only if x > 1000 \endcode */ diff --git a/Documentation/Doxygen/3-DeveloperManual/Concepts/RenderingTests.dox b/Documentation/Doxygen/3-DeveloperManual/Concepts/RenderingTests.dox index 2dbe0bd4ec..134aeec00b 100644 --- a/Documentation/Doxygen/3-DeveloperManual/Concepts/RenderingTests.dox +++ b/Documentation/Doxygen/3-DeveloperManual/Concepts/RenderingTests.dox @@ -1,97 +1,97 @@ namespace mitk{ /** \page RenderingTests Automatic Rendering Tests Available sections: -# \ref RenderingTests_WhatIsARenderingTest "What is an automatic rendering test?" -# \ref RenderingTests_HowToCreateATest "How to create a rendering test" \section RenderingTests_WhatIsARenderingTest What is an automatic rendering test? An automatic rendering test is a powerful tool to test rendering results automatically via dashboard. Regarding rendering lots of different sources influence the output on the screen (e.g. different mappers, renderes, camera settings or the algorithm creating the data). Thus, during the rendering process of an image many different classes are involved and can have impact on the output. A minor change in an important class (e.g. mitkVtkPropRenderer) can have major impact on the actual rendering. An automatic rendering test takes an arbitrary object as input (e.g. image, surface, point set), renders this into an mitkRenderWindow, makes a screen shot of that renderwindow and finally compares that screen shot to a given reference. Of course, the reference has to be defined by the user. Internally, a VTK test method is used to compare both screen shots and measure differences. In case of failure, a difference can be generated to show exactly which pixels are rendered incorrectly. Implementing automatic rendering tests for algorithms ensures that algorithms deliver the same output as they used to do in previous version of MITK. \section RenderingTests_HowToCreateATest How to create your own automatic rendering test To create an automatic rendering test you should use an existing test as example (e.g. mitkImageVtkMapper2DTest). \subsection RenderingTests_HowToCreateATest_Sub1 Adding the test to CMake Like adding any test with parameters to CMake, you have to add a custom test to the files.cmake and the corresponding CMakeLists.txt: For instance a test for the mitkImageVtkMapper2D has to be added like this: files.cmake \code set(MODULE_CUSTOM_TESTS ... mitkImageVtkMapper2D.cpp ) \endcode CMakeLists.txt \code mitkAddCustomModuleTest(mitkImageVtkMapper2D_rgbaImage640x480 mitkImageVtkMapper2D #custom name of the test and executable ${MITK_DATA_DIR}/RenderingTestData/rgbaImage.png #input image to load in data storage -V ${MITK_DATA_DIR}/RenderingTestData/ReferenceScreenshots/rgbaImage640x480REF.png #corresponding reference screenshot ) \endcode The first parameter defines a custom name for the test. This is a feature to distinguish between tests with different inputs. In this example the test is named mitkImageVtkMapper2D_rgbaImage640x480 to show that this test is using the test image rbgaImage640x480 as input. The next parameters sets test executable name (i.e. the name of the test class). Here: mitkImageVtkMapper2D. The next parameter(s) are used to pass the input to the test. For instance, it is possible to set -multiple objects as input for a test (e.g. /path/to/img1.jpg /path/to/img2.pic /path/to/pointset.mps). +multiple objects as input for a test (e.g. /path/to/img1.jpg /path/to/img2.nrrd /path/to/pointset.mps). All test data for core tests should be placed into the MITK-DATA repository inside the folder: ${MITK_DATA_DIR}/RenderingTestData/. It is possible to create other folders for different modules or bundles. The option -V defines the path to the reference screen shot and is internally used by VTK. The reference screen shot is highly important and has to be proven if is correct. The mitkRenderingTestHelper offers means to capture a screen shot of a renderwindow. Capturing a reference screen shot should happen just once and NOT be a permanent part of the test. It is also possible to set the option -T /path/to/directory/. This option is internally used by VTK to save a difference image. This is meant for debugging and should not be used for the final implemenation of a test. \subsection RenderingTests_HowToCreateATest_Sub2 Coding the test Writing the test code is pretty straight forward. In the example of the mitkImageVtkMapper2DTest the input parameters are added to a datastorage and rendered into a render window via the mitkRenderingTestHelper. Last, the vtkTesting macro is called to compare the given reference to the data rendered in the renderwindow: \code int retVal = vtkRegressionTestImage( renderingHelper.GetVtkRenderWindow() ); //retVal meanings: (see VTK/Rendering/vtkTesting.h) //0 = test failed //1 = test passed //2 = test not run //3 = something with vtkInteraction MITK_TEST_CONDITION( retVal == 1, "VTK test result positive" ); \endcode If the content of the previously filled renderwindow does not equal the reference, the test will fail. Feel free to modify the data before rendering. E.g. create a surface from the loaded image and render that surface afterwards or add compute QBalls for an image and render those. Happy testing! */ } diff --git a/Documentation/doxygen.conf.in b/Documentation/doxygen.conf.in index 8a46babe1b..79bb026e21 100644 --- a/Documentation/doxygen.conf.in +++ b/Documentation/doxygen.conf.in @@ -1,2433 +1,2431 @@ # Doxyfile 1.8.8 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # # All text after a double hash (##) is considered a comment and is placed in # front of the TAG it is preceding. # # All text after a single hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] # For lists, items can also be appended using: # TAG += value [value, ...] # Values that contain spaces should be placed between quotes (\" \"). #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- # This tag specifies the encoding used for all characters in the config file # that follow. The default is UTF-8 which is also the encoding used for all text # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv # built into libc) for the transcoding. See http://www.gnu.org/software/libiconv # for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded by # double-quotes, unless you are using Doxywizard) that should identify the # project for which the documentation is generated. This name is used in the # title of most generated pages and in a few other places. # The default value is: My Project. PROJECT_NAME = "Medical Imaging Interaction Toolkit" # The PROJECT_NUMBER tag can be used to enter a project or revision number. This # could be handy for archiving the generated documentation or if some version # control system is used. PROJECT_NUMBER = @MITK_VERSION_STRING@ # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer a # quick idea about the purpose of the project. Keep the description short. PROJECT_BRIEF = "Medical Imaging Interaction Toolkit" # With the PROJECT_LOGO tag one can specify an logo or icon that is included in # the documentation. The maximum height of the logo should not exceed 55 pixels # and the maximum width should not exceed 200 pixels. Doxygen will copy the logo # to the output directory. PROJECT_LOGO = # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path # into which the generated documentation will be written. If a relative path is # entered, it will be relative to the location where doxygen was started. If # left blank the current directory will be used. OUTPUT_DIRECTORY = "@MITK_DOXYGEN_OUTPUT_DIR@" # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub- # directories (in 2 levels) under the output directory of each output format and # will distribute the generated files over these directories. Enabling this # option can be useful when feeding doxygen a huge amount of source files, where # putting all generated files in the same directory would otherwise causes # performance problems for the file system. # The default value is: NO. CREATE_SUBDIRS = NO # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII # characters to appear in the names of generated files. If set to NO, non-ASCII # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode # U+3044. # The default value is: NO. ALLOW_UNICODE_NAMES = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. # Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, # Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), # Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, # Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), # Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, # Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, # Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, # Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English # If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. # The default value is: YES. BRIEF_MEMBER_DESC = YES # If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief # description of a member or function before the detailed description # # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the # brief descriptions will be completely suppressed. # The default value is: YES. REPEAT_BRIEF = YES # This tag implements a quasi-intelligent brief description abbreviator that is # used to form the text in various listings. Each string in this list, if found # as the leading text of the brief description, will be stripped from the text # and the result, after processing the whole list, is used as the annotated # text. Otherwise, the brief description is used as-is. If left blank, the # following values are used ($name is automatically replaced with the name of # the entity):The $name class, The $name widget, The $name file, is, provides, # specifies, contains, represents, a, an and the. ABBREVIATE_BRIEF = # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then # doxygen will generate a detailed section even if there is only a brief # description. # The default value is: NO. ALWAYS_DETAILED_SEC = NO # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all # inherited members of a class in the documentation of that class as if those # members were ordinary class members. Constructors, destructors and assignment # operators of the base classes will not be shown. # The default value is: NO. INLINE_INHERITED_MEMB = NO # If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path # before files name in the file list and in the header files. If set to NO the # shortest path that makes the file name unique will be used # The default value is: YES. FULL_PATH_NAMES = NO # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. # Stripping is only done if one of the specified strings matches the left-hand # part of the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the path to # strip. # # Note that you can specify absolute paths here, but also relative paths, which # will be relative from the directory where doxygen is started. # This tag requires that the tag FULL_PATH_NAMES is set to YES. STRIP_FROM_PATH = # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the # path mentioned in the documentation of a class, which tells the reader which # header file to include in order to use a class. If left blank only the name of # the header file containing the class definition is used. Otherwise one should # specify the list of include paths that are normally passed to the compiler # using the -I flag. STRIP_FROM_INC_PATH = # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but # less readable) file names. This can be useful is your file systems doesn't # support long names like on DOS, Mac, or CD-ROM. # The default value is: NO. SHORT_NAMES = NO # If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the # first line (until the first dot) of a Javadoc-style comment as the brief # description. If set to NO, the Javadoc-style will behave just like regular Qt- # style comments (thus requiring an explicit @brief command for a brief # description.) # The default value is: NO. JAVADOC_AUTOBRIEF = NO # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus # requiring an explicit \brief command for a brief description.) # The default value is: NO. QT_AUTOBRIEF = NO # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a # multi-line C++ special comment block (i.e. a block of //! or /// comments) as # a brief description. This used to be the default behavior. The new default is # to treat a multi-line C++ comment block as a detailed description. Set this # tag to YES if you prefer the old behavior instead. # # Note that setting this tag to YES also means that rational rose comments are # not recognized any more. # The default value is: NO. MULTILINE_CPP_IS_BRIEF = NO # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the # documentation from any documented member that it re-implements. # The default value is: YES. INHERIT_DOCS = YES # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a # new page for each member. If set to NO, the documentation of a member will be # part of the file/class/namespace that contains it. # The default value is: NO. SEPARATE_MEMBER_PAGES = NO # The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen # uses this value to replace tabs by spaces in code fragments. # Minimum value: 1, maximum value: 16, default value: 4. TAB_SIZE = 8 # This tag can be used to specify a number of aliases that act as commands in # the documentation. An alias has the form: # name=value # For example adding # "sideeffect=@par Side Effects:\n" # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert # newlines. ALIASES = "FIXME=\par Fix Me's:\n" \ "BlueBerry=\if BLUEBERRY" \ "endBlueBerry=\endif" \ "bundlemainpage{1}=\page \1" \ "embmainpage{1}=\page \1" \ "github{2}=\2" \ "deprecatedSince{1}=\xrefitem deprecatedSince\1 \"\" \"Functions deprecated as of \1\" \deprecated (as of \1) " \ "minimumCMakeVersion=@MITK_CMAKE_MINIMUM_REQUIRED_VERSION@" \ "minimumQt5Version=@MITK_QT5_MINIMUM_VERSION@" \ "imageMacro{3}=\image html \1 \2 \n \image latex \1 \2 width=\3cm" \ "developersguidemainpage{1}=\page \1 " \ "usersguidemainpage{1}=\page \1 " \ "nondependentPluginLink{3}= \ref \1 \"\3\" " # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # only. Doxygen will then generate output that is more tailored for C. For # instance, some of the names that are used will be different. The list of all # members will be omitted, etc. # The default value is: NO. OPTIMIZE_OUTPUT_FOR_C = NO # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or # Python sources only. Doxygen will then generate output that is more tailored # for that language. For instance, namespaces will be presented as packages, # qualified scopes will look different, etc. # The default value is: NO. OPTIMIZE_OUTPUT_JAVA = NO # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran # sources. Doxygen will then generate output that is tailored for Fortran. # The default value is: NO. OPTIMIZE_FOR_FORTRAN = NO # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL # sources. Doxygen will then generate output that is tailored for VHDL. # The default value is: NO. OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, # C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: # FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: # Fortran. In the later case the parser tries to guess whether the code is fixed # or free formatted code, this is the default for Fortran type files), VHDL. For # instance to make doxygen treat .inc files as Fortran files (default is PHP), # and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # # Note that for custom extensions you also need to set FILE_PATTERNS otherwise # the files are not read by doxygen. EXTENSION_MAPPING = cmake=c++ # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable # documentation. See http://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. # The default value is: YES. MARKDOWN_SUPPORT = YES # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by by putting a % sign in front of the word # or globally by setting AUTOLINK_SUPPORT to NO. # The default value is: YES. AUTOLINK_SUPPORT = YES # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should set this # tag to YES in order to let doxygen match functions declarations and # definitions whose arguments contain STL classes (e.g. func(std::string); # versus func(std::string) {}). This also make the inheritance and collaboration # diagrams that involve STL classes more complete and accurate. # The default value is: NO. BUILTIN_STL_SUPPORT = YES # If you use Microsoft's C++/CLI language, you should set this option to YES to # enable parsing support. # The default value is: NO. CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: # http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. SIP_SUPPORT = NO # For Microsoft's IDL there are propget and propput attributes to indicate # getter and setter methods for a property. Setting this option to YES will make # doxygen to replace the get and set methods by a property in the documentation. # This will only work if the methods are indeed getting or setting a simple # type. If this is not the case, or you want to show the methods anyway, you # should set this option to NO. # The default value is: YES. IDL_PROPERTY_SUPPORT = YES # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC # tag is set to YES, then doxygen will reuse the documentation of the first # member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. # The default value is: NO. DISTRIBUTE_GROUP_DOC = YES # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent # subgrouping. Alternatively, this can be done per class using the # \nosubgrouping command. # The default value is: YES. SUBGROUPING = YES # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions # are shown inside the group in which they are included (e.g. using \ingroup) # instead of on a separate page (for HTML and Man pages) or section (for LaTeX # and RTF). # # Note that this feature does not work in combination with # SEPARATE_MEMBER_PAGES. # The default value is: NO. INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions # with only public data fields or simple typedef fields will be shown inline in # the documentation of the scope in which they are defined (i.e. file, # namespace, or group documentation), provided this scope is documented. If set # to NO, structs, classes, and unions are shown on a separate page (for HTML and # Man pages) or section (for LaTeX and RTF). # The default value is: NO. INLINE_SIMPLE_STRUCTS = NO # When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or # enum is documented as struct, union, or enum with the name of the typedef. So # typedef struct TypeS {} TypeT, will appear in the documentation as a struct # with name TypeT. When disabled the typedef will appear as a member of a file, # namespace, or class. And the struct will be named TypeS. This can typically be # useful for C code in case the coding convention dictates that all compound # types are typedef'ed and only the typedef is referenced, never the tag name. # The default value is: NO. TYPEDEF_HIDES_STRUCT = NO # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This # cache is used to resolve symbols given their name and scope. Since this can be # an expensive process and often the same symbol appears multiple times in the # code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small # doxygen will become slower. If the cache is too large, memory is wasted. The # cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range # is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 # symbols. At the end of a run doxygen will report the cache usage and suggest # the optimal cache size from a speed point of view. # Minimum value: 0, maximum value: 9, default value: 0. LOOKUP_CACHE_SIZE = 0 #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. Private # class members and static file members will be hidden unless the # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. # Note: This will also disable the warnings about undocumented members that are # normally produced when WARNINGS is set to YES. # The default value is: NO. EXTRACT_ALL = YES # If the EXTRACT_PRIVATE tag is set to YES all private members of a class will # be included in the documentation. # The default value is: NO. EXTRACT_PRIVATE = NO # If the EXTRACT_PACKAGE tag is set to YES all members with package or internal # scope will be included in the documentation. # The default value is: NO. EXTRACT_PACKAGE = NO # If the EXTRACT_STATIC tag is set to YES all static members of a file will be # included in the documentation. # The default value is: NO. EXTRACT_STATIC = YES # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined # locally in source files will be included in the documentation. If set to NO # only classes defined in header files are included. Does not have any effect # for Java sources. # The default value is: YES. EXTRACT_LOCAL_CLASSES = @MITK_DOXYGEN_INTERNAL_DOCS@ # This flag is only useful for Objective-C code. When set to YES local methods, # which are defined in the implementation section but not in the interface are # included in the documentation. If set to NO only methods in the interface are # included. # The default value is: NO. EXTRACT_LOCAL_METHODS = NO # If this flag is set to YES, the members of anonymous namespaces will be # extracted and appear in the documentation as a namespace called # 'anonymous_namespace{file}', where file will be replaced with the base name of # the file that contains the anonymous namespace. By default anonymous namespace # are hidden. # The default value is: NO. EXTRACT_ANON_NSPACES = NO # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all # undocumented members inside documented classes or files. If set to NO these # members will be included in the various overviews, but no documentation # section is generated. This option has no effect if EXTRACT_ALL is enabled. # The default value is: NO. HIDE_UNDOC_MEMBERS = NO # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. If set # to NO these classes will be included in the various overviews. This option has # no effect if EXTRACT_ALL is enabled. # The default value is: NO. HIDE_UNDOC_CLASSES = NO # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend # (class|struct|union) declarations. If set to NO these declarations will be # included in the documentation. # The default value is: NO. HIDE_FRIEND_COMPOUNDS = @MITK_DOXYGEN_HIDE_FRIEND_COMPOUNDS@ # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any # documentation blocks found inside the body of a function. If set to NO these # blocks will be appended to the function's detailed documentation block. # The default value is: NO. HIDE_IN_BODY_DOCS = NO # The INTERNAL_DOCS tag determines if documentation that is typed after a # \internal command is included. If the tag is set to NO then the documentation # will be excluded. Set it to YES to include the internal documentation. # The default value is: NO. INTERNAL_DOCS = @MITK_DOXYGEN_INTERNAL_DOCS@ # If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file # names in lower-case letters. If set to YES upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows # and Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = YES # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with # their full class and namespace scopes in the documentation. If set to YES the # scope will be hidden. # The default value is: NO. HIDE_SCOPE_NAMES = NO # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of # the files that are included by a file in the documentation of that file. # The default value is: YES. SHOW_INCLUDE_FILES = YES # If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each # grouped member an include statement to the documentation, telling the reader # which file to include in order to use the member. # The default value is: NO. SHOW_GROUPED_MEMB_INC = NO # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. FORCE_LOCAL_INCLUDES = NO # If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the # documentation for inline members. # The default value is: YES. INLINE_INFO = YES # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the # (detailed) documentation of file and class members alphabetically by member # name. If set to NO the members will appear in declaration order. # The default value is: YES. SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member # name. If set to NO the members will appear in declaration order. Note that # this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the # (brief and detailed) documentation of class members so that constructors and # destructors are listed first. If set to NO the constructors will appear in the # respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. # Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief # member documentation. # Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting # detailed member documentation. # The default value is: NO. SORT_MEMBERS_CTORS_1ST = NO # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy # of group names into alphabetical order. If set to NO the group names will # appear in their defined order. # The default value is: NO. SORT_GROUP_NAMES = NO # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by # fully-qualified names, including namespaces. If set to NO, the class list will # be sorted only by class name, not including the namespace part. # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. # Note: This option applies only to the class list, not to the alphabetical # list. # The default value is: NO. SORT_BY_SCOPE_NAME = YES # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper # type resolution of all parameters of a function it will reject a match between # the prototype and the implementation of a member function even if there is # only one candidate or it is obvious which candidate to choose by doing a # simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still # accept a match between prototype and implementation in such cases. # The default value is: NO. STRICT_PROTO_MATCHING = NO # The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the # todo list. This list is created by putting \todo commands in the # documentation. # The default value is: YES. GENERATE_TODOLIST = @MITK_DOXYGEN_GENERATE_TODOLIST@ # The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the # test list. This list is created by putting \test commands in the # documentation. # The default value is: YES. GENERATE_TESTLIST = YES # The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug # list. This list is created by putting \bug commands in the documentation. # The default value is: YES. GENERATE_BUGLIST = @MITK_DOXYGEN_GENERATE_BUGLIST@ # The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO) # the deprecated list. This list is created by putting \deprecated commands in # the documentation. # The default value is: YES. GENERATE_DEPRECATEDLIST= @MITK_DOXYGEN_GENERATE_DEPRECATEDLIST@ # The ENABLED_SECTIONS tag can be used to enable conditional documentation # sections, marked by \if ... \endif and \cond # ... \endcond blocks. ENABLED_SECTIONS = @MITK_DOXYGEN_ENABLED_SECTIONS@ # The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the # initial value of a variable or macro / define can have for it to appear in the # documentation. If the initializer consists of more lines than specified here # it will be hidden. Use a value of 0 to hide initializers completely. The # appearance of the value of individual variables and macros / defines can be # controlled using \showinitializer or \hideinitializer command in the # documentation regardless of this setting. # Minimum value: 0, maximum value: 10000, default value: 30. MAX_INITIALIZER_LINES = 0 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at # the bottom of the documentation of classes and structs. If set to YES the list # will mention the files that were used to generate the documentation. # The default value is: YES. SHOW_USED_FILES = YES # Set the SHOW_FILES tag to NO to disable the generation of the Files page. This # will remove the Files entry from the Quick Index and from the Folder Tree View # (if specified). # The default value is: YES. SHOW_FILES = YES # Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces # page. This will remove the Namespaces entry from the Quick Index and from the # Folder Tree View (if specified). # The default value is: YES. SHOW_NAMESPACES = YES # The FILE_VERSION_FILTER tag can be used to specify a program or script that # doxygen should invoke to get the current version for each file (typically from # the version control system). Doxygen will invoke the program by executing (via # popen()) the command command input-file, where command is the value of the # FILE_VERSION_FILTER tag, and input-file is the name of an input file provided # by doxygen. Whatever the program writes to standard output is used as the file # version. For an example see the documentation. FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated # output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. You can # optionally specify a file name after the option, if omitted DoxygenLayout.xml # will be used as the name of the layout file. # # Note that if you run doxygen from a directory containing a file called # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE # tag is left empty. LAYOUT_FILE = "@MITK_SOURCE_DIR@/Documentation/MITKDoxygenLayout.xml" # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool # to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. CITE_BIB_FILES = #--------------------------------------------------------------------------- # Configuration options related to warning and progress messages #--------------------------------------------------------------------------- # The QUIET tag can be used to turn on/off the messages that are generated to # standard output by doxygen. If QUIET is set to YES this implies that the # messages are off. # The default value is: NO. QUIET = YES # The WARNINGS tag can be used to turn on/off the warning messages that are # generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES # this implies that the warnings are on. # # Tip: Turn warnings on while writing the documentation. # The default value is: YES. WARNINGS = YES # If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag # will automatically be disabled. # The default value is: YES. WARN_IF_UNDOCUMENTED = YES # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for # potential errors in the documentation, such as not documenting some parameters # in a documented function, or documenting parameters that don't exist or using # markup commands wrongly. # The default value is: YES. WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO doxygen will only warn about wrong or incomplete parameter # documentation, but not about the absence of documentation. # The default value is: NO. WARN_NO_PARAMDOC = NO # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated # and the warning text. Optionally the format may contain $version, which will # be replaced by the version of the file (if it could be obtained via # FILE_VERSION_FILTER) # The default value is: $file:$line: $text. WARN_FORMAT = "$file:$line: $text" # The WARN_LOGFILE tag can be used to specify a file to which warning and error # messages should be written. If left blank the output is written to standard # error (stderr). WARN_LOGFILE = #--------------------------------------------------------------------------- # Configuration options related to the input files #--------------------------------------------------------------------------- # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with # spaces. # Note: If this tag is empty the current directory is searched. INPUT = @MITK_SOURCE_DIR@ \ @MITK_BINARY_DIR@ \ @MITK_DOXYGEN_ADDITIONAL_INPUT_DIRS@ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv # documentation (see: http://www.gnu.org/software/libiconv) for the list of # possible encodings. # The default value is: UTF-8. INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and # *.h) to filter out the source-files in the directories. If left blank the # following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, # *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, # *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, # *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, # *.qsf, *.as and *.js. FILE_PATTERNS = *.h \ *.dox \ *.md # The RECURSIVE tag can be used to specify whether or not subdirectories should # be searched for input files as well. # The default value is: NO. RECURSIVE = YES # The EXCLUDE tag can be used to specify files and/or directories that should be # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. # # Note that relative paths are relative to the directory from which doxygen is # run. -EXCLUDE = "@MITK_SOURCE_DIR@/Utilities/IpFunc/" \ - "@MITK_SOURCE_DIR@/Utilities/IpSegmentation/" \ - "@MITK_SOURCE_DIR@/Utilities/qtsingleapplication/" \ +EXCLUDE = "@MITK_SOURCE_DIR@/Utilities/qtsingleapplication/" \ "@MITK_SOURCE_DIR@/Applications/PluginGenerator/" \ "@MITK_SOURCE_DIR@/Modules/CppMicroServices/core/doc/snippets/" \ "@MITK_SOURCE_DIR@/Modules/CppMicroServices/core/doc/doxygen/standalone/" \ "@MITK_SOURCE_DIR@/Modules/CppMicroServices/core/test/" \ "@MITK_SOURCE_DIR@/Modules/CppMicroServices/core/examples/" \ "@MITK_SOURCE_DIR@/Modules/CppMicroServices/core/src/util/jsoncpp.cpp" \ "@MITK_SOURCE_DIR@/Modules/CppMicroServices/third_party" \ "@MITK_SOURCE_DIR@/CMake/PackageDepends" \ "@MITK_SOURCE_DIR@/CMakeExternals" \ "@MITK_SOURCE_DIR@/Licenses" \ "@MITK_BINARY_DIR@/Documentation/Doxygen" \ "@MITK_BINARY_DIR@/bin/" \ "@MITK_BINARY_DIR@/PT/" \ "@MITK_BINARY_DIR@/GP/" \ "@MITK_BINARY_DIR@/_CPack_Packages/" \ @MITK_DOXYGEN_ADDITIONAL_EXCLUDE_DIRS@ # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or # directories that are symbolic links (a Unix file system feature) are excluded # from the input. # The default value is: NO. EXCLUDE_SYMLINKS = NO # If the value of the INPUT tag contains directories, you can use the # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude # certain files from those directories. # # Note that the wildcards are matched against the file with absolute path, so to # exclude all test directories for example use the pattern */test/* EXCLUDE_PATTERNS = README* \ moc_* \ ui_* \ qrc_* \ wrap_* \ Register* \ */files.cmake \ */.git/* \ *_p.h \ *Private.* \ */Internal/* \ */internal/* \ */Snippets/* \ */snippets/* \ */testing/* \ */Testing/* \ */test/* \ */resource/* \ "@MITK_BINARY_DIR@/*.cmake" \ @MITK_DOXYGEN_EXCLUDE_PATTERNS@ # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names # (namespaces, classes, functions, etc.) that should be excluded from the # output. The symbol name can be a fully qualified name, a word, or if the # wildcard * is used, a substring. Examples: ANamespace, AClass, # AClass::ANamespace, ANamespace::*Test # # Note that the wildcards are matched against the file with absolute path, so to # exclude all test directories use the pattern */test/* EXCLUDE_SYMBOLS = # The EXAMPLE_PATH tag can be used to specify one or more files or directories # that contain example code fragments that are included (see the \include # command). EXAMPLE_PATH = "@MITK_SOURCE_DIR@/Examples/" \ "@MITK_SOURCE_DIR@/Examples/Tutorial/" \ "@MITK_SOURCE_DIR@/Examples/Plugins/" \ "@MITK_SOURCE_DIR@/Examples/QtFreeRender/" \ "@MITK_SOURCE_DIR@/Modules/Core/" \ "@MITK_SOURCE_DIR@/Modules/CppMicroServices/core/doc/snippets/" \ "@MITK_SOURCE_DIR@/Modules/CppMicroServices/core/examples/" \ "@MITK_SOURCE_DIR@/Modules/CppMicroServices/" \ "@MITK_SOURCE_DIR@/Modules/OpenCL/Documentation/doxygen/snippets/" \ "@MITK_SOURCE_DIR@/Modules/IGT/Tutorial/" \ "@MITK_SOURCE_DIR@/Plugins/org.mitk.gui.common/src/" \ "@MITK_SOURCE_DIR@/Plugins/org.mitk.gui.qt.igtexamples/" \ "@MITK_SOURCE_DIR@/Plugins/org.mitk.gui.qt.igttracking/" # If the value of the EXAMPLE_PATH tag contains directories, you can use the # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and # *.h) to filter out the source-files in the directories. If left blank all # files are included. EXAMPLE_PATTERNS = # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be # searched for input files to be used with the \include or \dontinclude commands # irrespective of the value of the RECURSIVE tag. # The default value is: NO. EXAMPLE_RECURSIVE = YES # The IMAGE_PATH tag can be used to specify one or more files or directories # that contain images that are to be included in the documentation (see the # \image command). IMAGE_PATH = "@MITK_SOURCE_DIR@/Documentation/Doxygen/" \ "@MITK_SOURCE_DIR@" # The INPUT_FILTER tag can be used to specify a program that doxygen should # invoke to filter for each input file. Doxygen will invoke the filter program # by executing (via popen()) the command: # # # # where is the value of the INPUT_FILTER tag, and is the # name of an input file. Doxygen will then use the output that the filter # program writes to standard output. If FILTER_PATTERNS is specified, this tag # will be ignored. # # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. INPUT_FILTER = # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern # basis. Doxygen will compare the file name with each pattern and apply the # filter if there is a match. The filters are a list of the form: pattern=filter # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. FILTER_PATTERNS = *.cmake=@CMakeDoxygenFilter_EXECUTABLE@ # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using # INPUT_FILTER ) will also be used to filter the input files that are used for # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). # The default value is: NO. FILTER_SOURCE_FILES = NO # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file # pattern. A pattern will override the setting for FILTER_PATTERN (if any) and # it is also possible to disable source filtering for a specific pattern using # *.ext= (so without naming a filter). # This tag requires that the tag FILTER_SOURCE_FILES is set to YES. FILTER_SOURCE_PATTERNS = # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that # is part of the input, its contents will be placed on the main page # (index.html). This can be useful if you have a project on for instance GitHub # and want to reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = #--------------------------------------------------------------------------- # Configuration options related to source browsing #--------------------------------------------------------------------------- # If the SOURCE_BROWSER tag is set to YES then a list of source files will be # generated. Documented entities will be cross-referenced with these sources. # # Note: To get rid of all source code in the generated output, make sure that # also VERBATIM_HEADERS is set to NO. # The default value is: NO. SOURCE_BROWSER = YES # Setting the INLINE_SOURCES tag to YES will include the body of functions, # classes and enums directly into the documentation. # The default value is: NO. INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any # special comment blocks from generated source code fragments. Normal C, C++ and # Fortran comments will always remain visible. # The default value is: YES. STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented # function all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = YES # If the REFERENCES_RELATION tag is set to YES then for each documented function # all documented entities called/used by that function will be listed. # The default value is: NO. REFERENCES_RELATION = YES # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set # to YES, then the hyperlinks from functions in REFERENCES_RELATION and # REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will # link to the documentation. # The default value is: YES. REFERENCES_LINK_SOURCE = YES # If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the # source code will show a tooltip with additional information such as prototype, # brief description and links to the definition and documentation. Since this # will make the HTML file larger and loading of large files a bit slower, you # can opt to disable this feature. # The default value is: YES. # This tag requires that the tag SOURCE_BROWSER is set to YES. SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system # (see http://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global # - Enable SOURCE_BROWSER and USE_HTAGS in the config file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # # Doxygen will invoke htags (and that will in turn invoke gtags), so these # tools must be available from the command line (i.e. in the search path). # # The result: instead of the source browser generated by doxygen, the links to # source code will now point to the output of htags. # The default value is: NO. # This tag requires that the tag SOURCE_BROWSER is set to YES. USE_HTAGS = NO # If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a # verbatim copy of the header file for each class for which an include is # specified. Set to NO to disable this. # See also: Section \class. # The default value is: YES. VERBATIM_HEADERS = YES #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all # compounds will be generated. Enable this if the project contains a lot of # classes, structs, unions or interfaces. # The default value is: YES. ALPHABETICAL_INDEX = YES # The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in # which the alphabetical index list will be split. # Minimum value: 1, maximum value: 20, default value: 5. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. COLS_IN_ALPHA_INDEX = 3 # In case all classes in a project start with a common prefix, all classes will # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag # can be used to specify a prefix (or a list of prefixes) that should be ignored # while generating the index headers. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. IGNORE_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the HTML output #--------------------------------------------------------------------------- # If the GENERATE_HTML tag is set to YES doxygen will generate HTML output # The default value is: YES. GENERATE_HTML = YES # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of # it. # The default directory is: html. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_OUTPUT = html # The HTML_FILE_EXTENSION tag can be used to specify the file extension for each # generated HTML page (for example: .htm, .php, .asp). # The default value is: .html. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_FILE_EXTENSION = .html # The HTML_HEADER tag can be used to specify a user-defined HTML header file for # each generated HTML page. If the tag is left blank doxygen will generate a # standard header. # # To get valid HTML the header file that includes any scripts and style sheets # that doxygen needs, which is dependent on the configuration options used (e.g. # the setting GENERATE_TREEVIEW). It is highly recommended to start with a # default header using # doxygen -w html new_header.html new_footer.html new_stylesheet.css # YourConfigFile # and then modify the file new_header.html. See also section "Doxygen usage" # for information on how to generate the default header that doxygen normally # uses. # Note: The header is subject to change so you typically have to regenerate the # default header when upgrading to a newer version of doxygen. For a description # of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_HEADER = # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each # generated HTML page. If the tag is left blank doxygen will generate a standard # footer. See HTML_HEADER for more information on how to generate a default # footer and what special commands can be used inside the footer. See also # section "Doxygen usage" for information on how to generate the default footer # that doxygen normally uses. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style # sheet that is used by each HTML page. It can be used to fine-tune the look of # the HTML output. If left blank doxygen will generate a default style sheet. # See also section "Doxygen usage" for information on how to generate the style # sheet that doxygen normally uses. # Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as # it is more robust and this tag (HTML_STYLESHEET) will in the future become # obsolete. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_STYLESHEET = # The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined # cascading style sheets that are included after the standard style sheets # created by doxygen. Using this option one can overrule certain style aspects. # This is preferred over using HTML_STYLESHEET since it does not replace the # standard style sheet and is therefor more robust against future updates. # Doxygen will copy the style sheet files to the output directory. # Note: The order of the extra stylesheet files is of importance (e.g. the last # stylesheet in the list overrules the setting of the previous ones in the # list). For an example see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_EXTRA_STYLESHEET = @MITK_DOXYGEN_STYLESHEET@ # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the # $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that the # files will be copied as-is; there are no commands or markers available. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_EXTRA_FILES = "@MITK_SOURCE_DIR@/Documentation/Doxygen/mitkLogo.jpg" # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the stylesheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see # http://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_COLORSTYLE_HUE = 220 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors # in the HTML output. For a value of 0 the output will use grayscales only. A # value of 255 will produce the most vivid colors. # Minimum value: 0, maximum value: 255, default value: 100. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_COLORSTYLE_SAT = 100 # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the # luminance component of the colors in the HTML output. Values below 100 # gradually make the output lighter, whereas values above 100 make the output # darker. The value divided by 100 is the actual gamma applied, so 80 represents # a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not # change the gamma. # Minimum value: 40, maximum value: 240, default value: 80. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this # to NO can help when comparing the output of multiple runs. # The default value is: YES. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = YES # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_DYNAMIC_SECTIONS = @MITK_DOXYGEN_HTML_DYNAMIC_SECTIONS@ # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries # shown in the various tree structured indices initially; the user can expand # and collapse entries dynamically later on. Doxygen will expand the tree to # such a level that at most the specified number of entries are visible (unless # a fully collapsed tree already exceeds this amount). So setting the number of # entries 1 will produce a full collapsed tree by default. 0 is a special value # representing an infinite number of entries and will result in a full expanded # tree by default. # Minimum value: 0, maximum value: 9999, default value: 100. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development # environment (see: http://developer.apple.com/tools/xcode/), introduced with # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at # startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html # for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_DOCSET = NO # This tag determines the name of the docset feed. A documentation feed provides # an umbrella under which multiple documentation sets from a single provider # (such as a company or product suite) can be grouped. # The default value is: Doxygen generated docs. # This tag requires that the tag GENERATE_DOCSET is set to YES. DOCSET_FEEDNAME = "Doxygen generated docs" # This tag specifies a string that should uniquely identify the documentation # set bundle. This should be a reverse domain-name style string, e.g. # com.mycompany.MyDocSet. Doxygen will append .docset to the name. # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_DOCSET is set to YES. DOCSET_BUNDLE_ID = org.doxygen.Project # The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify # the documentation publisher. This should be a reverse domain-name style # string, e.g. com.mycompany.MyDocSet.documentation. # The default value is: org.doxygen.Publisher. # This tag requires that the tag GENERATE_DOCSET is set to YES. DOCSET_PUBLISHER_ID = org.doxygen.Publisher # The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. # The default value is: Publisher. # This tag requires that the tag GENERATE_DOCSET is set to YES. DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop # (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML # files are now used as the Windows 98 help format, and will replace the old # Windows help format (.hlp) on all Windows platforms in the future. Compressed # HTML files also contain an index, a table of contents, and you can search for # words in the documentation. The HTML workshop also contains a viewer for # compressed HTML files. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_HTMLHELP = NO # The CHM_FILE tag can be used to specify the file name of the resulting .chm # file. You can add a path in front of the file if the result should not be # written to the html output directory. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. CHM_FILE = # The HHC_LOCATION tag can be used to specify the location (absolute path # including file name) of the HTML help compiler ( hhc.exe). If non-empty # doxygen will try to run the HTML help compiler on the generated index.hhp. # The file has to be specified with full path. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. HHC_LOCATION = # The GENERATE_CHI flag controls if a separate .chi index file is generated ( # YES) or that it should be included in the master .chm file ( NO). # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. GENERATE_CHI = NO # The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc) # and project file content. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( # YES) or a normal table of contents ( NO) in the .chm file. Furthermore it # enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. BINARY_TOC = NO # The TOC_EXPAND flag can be set to YES to add extra items for group members to # the table of contents of the HTML help documentation and to the tree view. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. TOC_EXPAND = NO # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help # (.qch) of the generated HTML documentation. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_QHP = @MITK_DOXYGEN_GENERATE_QHP@ # If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify # the file name of the resulting .qch file. The path specified is relative to # the HTML output folder. # This tag requires that the tag GENERATE_QHP is set to YES. QCH_FILE = @MITK_DOXYGEN_QCH_FILE@ # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace # (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. QHP_NAMESPACE = "org.mitk" # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual # Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. QHP_VIRTUAL_FOLDER = MITK # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: # http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = # The QHG_LOCATION tag can be used to specify the location of Qt's # qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the # generated .qhp file. # This tag requires that the tag GENERATE_QHP is set to YES. QHG_LOCATION = @QT_HELPGENERATOR_EXECUTABLE@ # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be # generated, together with the HTML files, they form an Eclipse help plugin. To # install this plugin and make it available under the help contents menu in # Eclipse, the contents of the directory containing the HTML and XML files needs # to be copied into the plugins directory of eclipse. The name of the directory # within the plugins directory should be the same as the ECLIPSE_DOC_ID value. # After copying Eclipse needs to be restarted before the help appears. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_ECLIPSEHELP = NO # A unique identifier for the Eclipse help plugin. When installing the plugin # the directory name containing the HTML and XML files should also have this # name. Each documentation set should have its own identifier. # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. ECLIPSE_DOC_ID = org.doxygen.Project # If you want full control over the layout of the generated HTML pages it might # be necessary to disable the index and replace it with your own. The # DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top # of each HTML page. A value of NO enables the index and the value YES disables # it. Since the tabs in the index contain the same information as the navigation # tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. DISABLE_INDEX = NO # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. If the tag # value is set to YES, a side panel will be generated containing a tree-like # index structure (just like the one that is generated for HTML Help). For this # to work a browser that supports JavaScript, DHTML, CSS and frames is required # (i.e. any modern browser). Windows users are probably better off using the # HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can # further fine-tune the look of the index. As an example, the default style # sheet generated by doxygen has an example that shows how to put an image at # the root of the tree instead of the PROJECT_NAME. Since the tree basically has # the same information as the tab index, you could consider setting # DISABLE_INDEX to YES when enabling this option. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_TREEVIEW = YES # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that # doxygen will group on one line in the generated HTML documentation. # # Note that a value of 0 will completely suppress the enum values from appearing # in the overview section. # Minimum value: 0, maximum value: 20, default value: 4. # This tag requires that the tag GENERATE_HTML is set to YES. ENUM_VALUES_PER_LINE = 4 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used # to set the initial width (in pixels) of the frame in which the tree is shown. # Minimum value: 0, maximum value: 1500, default value: 250. # This tag requires that the tag GENERATE_HTML is set to YES. TREEVIEW_WIDTH = 300 # When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to # external symbols imported via tag files in a separate window. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. EXT_LINKS_IN_WINDOW = NO # Use this tag to change the font size of LaTeX formulas included as images in # the HTML documentation. When you change the font size after a successful # doxygen run you need to manually remove any form_*.png images from the HTML # output directory to force them to be regenerated. # Minimum value: 8, maximum value: 50, default value: 10. # This tag requires that the tag GENERATE_HTML is set to YES. FORMULA_FONTSIZE = 10 # Use the FORMULA_TRANPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # # Note that when changing this option you need to delete any form_*.png files in # the HTML output directory before the changes have effect. # The default value is: YES. # This tag requires that the tag GENERATE_HTML is set to YES. FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see # http://www.mathjax.org) which uses client side Javascript for the rendering # instead of using prerendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path # to it using the MATHJAX_RELPATH option. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. USE_MATHJAX = YES # When MathJax is enabled you can set the default output format to be used for # the MathJax output. See the MathJax site (see: # http://docs.mathjax.org/en/latest/output.html) for more details. # Possible values are: HTML-CSS (which is slower, but has the best # compatibility), NativeMML (i.e. MathML) and SVG. # The default value is: HTML-CSS. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_FORMAT = HTML-CSS # When MathJax is enabled you need to specify the location relative to the HTML # output directory using the MATHJAX_RELPATH option. The destination directory # should contain the MathJax.js script. For instance, if the mathjax directory # is located at the same level as the HTML output directory, then # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of # MathJax from http://www.mathjax.org before deployment. # The default value is: http://cdn.mathjax.org/mathjax/latest. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://www.mathjax.org/mathjax # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax # extension names that should be enabled during MathJax rendering. For example # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_EXTENSIONS = # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces # of code that will be used on startup of the MathJax code. See the MathJax site # (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an # example see the documentation. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_CODEFILE = # When the SEARCHENGINE tag is enabled doxygen will generate a search box for # the HTML output. The underlying search engine uses javascript and DHTML and # should work on any modern browser. Note that when using HTML help # (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) # there is already a search function so this one should typically be disabled. # For large projects the javascript based search engine can be slow, then # enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to # search using the keyboard; to jump to the search box use + S # (what the is depends on the OS and browser, but it is typically # , /