```
$ go get github.com/containernetworking/plugins (this line might cause a problem, but sudo su - command to root directory and run the command... then export GOPATH=$HOME/go in ~/.bashrc at the end of page then source ~/.bashrc)
$ pushd $GOPATH/src/github.com/containernetworking/plugins
$ ./build_linux.sh
$ sudo mkdir /opt/cni
$ sudo cp -r bin /opt/cni/
$ popd
Put the CNI configuration as /etc/cni/net.d/10-mynet.conf:
{
"cniVersion": "0.2.0",
"name": "mynet",
"type": "bridge",
"bridge": "cni0",
"isGateway": true,
"ipMasq": true,
"ipam": {
"type": "host-local",
"subnet": "172.19.0.0/24",
"routes": [
{ "dst": "0.0.0.0/0" }
]
}
}
[plugins.cri.cni]
# conf_dir is the directory in which the admin places a CNI conf.
conf_dir = "/etc/cni/net.d"
cat <<EOF | sudo tee /etc/modules-load.d/containerd.conf
overlay
br_netfilter
EOF
sudo modprobe overlay
sudo modprobe br_netfilter
# Setup required sysctl params, these persist across reboots.
cat <<EOF | sudo tee /etc/sysctl.d/99-kubernetes-cri.conf
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
EOF
# Apply sysctl params without reboot
sudo sysctl --system
```
**Second Question **
**Also is this the right way of restarting the containerd deamon which is installed via snap microk8s**
```
sudo systemctl restart snap.microk8s.daemon-containerd.service (snap installed microk8s)
```
if we install contained externally then (sudo systemctl restart containerd)